• 대한수학회논문집
• /
• 제12권4호
• /
• pp.985-998
• /
• 1997

For n random strips chosen so as to meet a fixed bounded convex set K of the plane we let $\nu$ be the number of intersection regions that meet K. We develop the integral formula for the mean value of $\nu$ and $\nu^2$ involving the area and the perimeter of K and the breadths of the strips. We get some geometric inequalities in way of studying integral geometry.

• 한국학교수학회논문집
• /
• 제15권1호
• /
• pp.183-197
• /
• 2012

평면기하는 가장 오래 된 학교수학 학습내용 중 하나이며, 중등학교에서 학생들의 사고력 및 창의력 신장에 중요한 역할을 한다. 평면기하 학습내용 중 정다각형은 초등학교, 중학교에서 볼록 정다각형을 중심으로 다루어지고 있는데, 본 연구에서는 학교에서 다루어지는 정다각형에 대한 학습내용을 기초지식으로 설정하고, 이를 기초로 정다각형 외연의 확장 과정을 체계적으로 탐색하였다. 특히 기하프로그램을 활용한 귀납적 탐구과정이 기하학습 내용 확장에 유의미한 방향을 제시해 줄 수 있다는 구체적 사례를 제시하였다. 본 연구결과를 통해, 정다각형에 대한 심화학습 자료 개발 및 기하 연구를 위한 바람직한 탐구 방향 제시가 기대되어진다.

• 한국CDE학회논문집
• /
• 제4권2호
• /
• pp.162-171
• /
• 1999

Plane sweep plays an important role in computational geometry. This paper shows that an extension of topological plane sweep to three-dimensional space can calculate the volume swept by rotating a solid polyhedral object about a fixed axis. Analyzing the characteristics of rotational swept volumes, we present an incremental algorithm based on the three-dimensional topological sweep technique. Our solution shows the time bound of O(n²·2?+T?), where n is the number of vertices in the original object and T? is time for handling face cycles. Here, α(n) is the inverse of Ackermann's function.

• 한국수학사학회지
• /
• 제31권6호
• /
• pp.315-337
• /
• 2018

Pythagorean thoerem exists in several equivalent forms in the Euclidean plane, that is, the Hilbert plane which in addition satisfies the parallel axiom. In this article, we investigate the truthness and mutual relationships of those propositions in various non-Hilbert planes which satisfy the parallel axiom and all the Hilbert axioms except the SAS axiom.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.169-169
• /
• 1999

We studied magnetic properties of co thin films deposited on Pd (111) surface, which attracted much attention recently due to the perpendicular magnetic anisotropy, using magnetic circular dichroism(MCD). Special attention was paid on the effect of Pd capping and interface roughness on the direction of magnetic easy axis, and for that purpose MCD signals for all Co thicknesses were measured with two different ways : in-plane and out-of-plane geometry. In case of bare Co films deposited on smooth Pd(111) surface, no MCD signal was observed under 4$\AA$ co thickness. At 4$\AA$ Co thickness, MCD signal at the out-of-plane geometry was observed, and for thicker Co films, only in-plane MCD signal was measured. This type of magnetic easy axis transition has been reported for other cases like Co/Pt system. The effect of 5$\AA$ Pd capping on these bare Co films made an remarkable change on the transition of magnetic easy axis. Out-of-plane MCD signals exists up to 20$\AA$ Co thickness, and disappears at 24$\AA$ Co thickness. In-plane MCD signals first appears at 10$\AA$ Co thickness and gradually increases up to 24$\AA$ Co thickness. Between 10$\AA$ and 20$\AA$ Co thickness, in-plane and out-of-plane MCD signal coexist. The formation of multi-domain structure or the existence of tilted magnetic easy axis is an possible scenario for such an interesting coexistence. The effect of interface roughness was also tested by measuring MCD signal on Co films deposited on un-annealed Pd(111) surface. Out-of-plane MCD signal was observed up to 8$\AA$ Co thickness and the anisotropy of MCD signal at 4$\AA$ Co thickness was very large with respect to that of Co film deposited on the smooth substrate. Above 8$\AA$ thickness, there exists only in-plane MCD signal. From above results, it was concluded that both Pd capping and interface roughness induce and reenforce the perpendicular magnetic anisotropy. The large perpendicular magnetic anisotropy of Co/Pd multilayer system made by sputtering method can be well understood from our results.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2172-2179
• /
• 2002

In this paper, we examine the dynamic electromechanical behavior of an edge crack in a piezoelectric ceramic layer bonded between two elastic layers under the combined anti-plane mechanical shear and in-plane electric transient loadings. We adopted both the permeable and impermeable crack boundary conditions. Fourier transforms are used to reduce the problem to the solution of two pairs of dual integral equations, which are then expressed to a Fredholm integral equation of the second kind. Numerical values on the dynamic energy release rate are presented to show the dependences upon the geometry, material combination, electromechanical coupling coefficient and electric field.

• 한국전산구조공학회논문집
• /
• 제20권3호
• /
• pp.339-345
• /
• 2007

본 논문에서는 등기하 해석법을 이용하여 평면 탄성문제의 변분식을 유도하였다. 등기하 해석법은 새로이 부각되고 있는 해석법으로서 기저 함수가 NURBS(Non-Uniform Rational B-Splines) 로부터 직접 생성되므로 해 공간은 CAD 모델을 구성하는 함수로써 표현된다. 또한 CAD 모델의 B-Spline 기저 함수를 직접 사용하므로 기하학적으로 엄밀한 형상을 표현할 수 있고 요소망의 재구성 없이 해석모델을 정밀화(Refinement)할 수 있는 강점이 있다. 본 논문에서는 이를 확장하여 연속체 기반의 애드조인트 설계 민감도 해석법을 사용하는 등기하 설계민감도 해석법을 유도하였다. 기존의 유한요소 기반형상 최적설계는 형상의 매개화에 어려움을 겪었으나 등기하 기반 최적설계에서는 기하학적 정보가 이미 B-spline 기저함수와 조정점에 포함되어 있으므로 이러한 어려움을 피할 수 있는 잠재력을 가지고 있다. 몇몇 수치 예제를 통해서 등기하 해석법을 사용한 설계 민감도 해석을 수행하였으며 유한차분 민감도와 비교하여 정확성을 확인하였다.

• 대한수학교육학회지:수학교육학연구
• /
• 제16권1호
• /
• pp.1-23
• /
• 2006

본 논문은 중학교 평면 논증기하를 원론 교육적 입장에서 분석 고찰한 것이다. 이를 위하여 먼저 'Euclid 원론'에 따른 고전적 원론 교육을 목적, 내용, 방법의 측면에서 분석하고 그 역사를 개관하였다. 이어 고전적 원론 교육에 대한 비판적 논의를 고찰하고 Clairaut의 '기하학 원론'과 Branford의 역사-발생적 기하 교육론을 중심으로 역사-발생적 기하 원론 교육을 목적, 내용, 방법의 측면에서 분석하였다. 그리고 이러한 분석과 근세 이후 기하교과서의 변천과정에 비추어 현재의 중학교 논증기하 교재의 기본가정을 분석하고, 그 내용 및 체제를 가설적 작도, 정리의 제시순서, 증명진술 방법, 정의제시 방법, 연습문제로 나누어 분석하였다. 마지막으로 이러한 논의를 바탕으로, 현 중학교 기하교재의 기본적 관점을 탐색하고 두 원론의 상보적 통합 방안을 모색하였다.

• Geomechanics and Engineering
• /
• 제12권6호
• /
• pp.983-1001
• /
• 2017

The extent by which economy and safety concerns can be addressed in earth retaining structure design depends on the accuracy of the assumed failure surface. Accordingly, this study attempts to investigate and quantify mechanical backfill properties that control failure surface geometry of cohesionless backfills at the active state for translational mode of wall movements. For this purpose, a small scale 1 g physical model study was conducted. The experimental setup simulated the conditions of a backfill behind a laterally translating vertical retaining wall in plane strain conditions. To monitor the influence of dilative behavior on failure surface geometry, model tests were conducted on backfills with different densities corresponding to different dilation angles. Failure surface geometries were identified using particle image velocimetry (PIV) method. Friction and dilation angles of the backfill are calculated as functions of failure stress state and relative density of the backfill using a well-known empirical equation, making it possible to quantify the influence of dilation angle on failure surface geometry. As a result, an empirical equation is proposed to predict active failure surface geometry for cohesionless backfills based on peak dilatancy angle. It is shown that the failure surface geometries calculated using the proposed equation are in good agreement with the identified failure surfaces.

• 제어로봇시스템학회논문지
• /
• 제15권11호
• /
• pp.1080-1087
• /
• 2009

This paper presents an algorithm to acquire 3D geometric information using a virtual plane method. The method to measure 3D information on the plane is easy, because it's not concerning value on the z-axis. A plane can be made by arbitrary three points in the 3D space, so the algorithm is able to make a number of virtual planes from feature points on the target object. In this case, these geometric relations between the origin of each virtual plane and the origin of the target object coordinates should be expressed as known homogeneous matrices. To include this idea, the algorithm could induce simple matrix formula which is only concerning unknown geometric relation between the origin of target object and the origin of camera coordinates. Therefore, it's more fast and simple than other methods. For achieving the proposed method, a regular pin-hole camera model and a perspective projection matrix which is defined by a geometric relation between each coordinate system is used. In the final part of this paper, we demonstrate the techniques for a variety of applications, including measurements in industrial parts and known patches images.