• Structural Engineering and Mechanics
• /
• 제33권2호
• /
• pp.159-177
• /
• 2009

The aim of this paper is to give a rigorous framework for the interpretation of limit analysis results including large displacements. The presentation is oriented towards unidimensional media (beams) but two-dimensional (plates) or three-dimensional media are also concerned. A single-degree-of-freedom system is first considered: it shows the basic phenomena of large displacement limit analysis or second-order limit analysis. The results are compared to those of a continuous system and the differences between both systems are discussed. Theoretical results are obtained using the kinematical approach of limit analysis. An admissible load-displacement plane is then defined, according to the yield design theory. The methodology used is applied to frame structures. The presented results are nevertheless different from those already published in the literature, as the virtual displacement field can be distinguished from the displacement field at collapse. The simplicity of large displacement limit analysis makes it attractive for practical engineering applications. The load-displacement upper bound can be used for instance in the optimal design of steel frames in seismic areas.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.38-47
• /
• 2000

Recently, finite element method has been used as an effective tool in the design process of sheet metal forming. In the present study, an implicit method and an explicit method have been developed for 2D analysis and 3D analysis, respectively, and applied to several processes including plane strain draw bending and TWB sqaure cup drawing. Also, commercial codes are used for geometrically complex problems, such as tube hydroforming, "L" cup deep drawing and side frame forming. In this paper, basic formulations used in the methods are introduced and results obtained from the applications are discussed.discussed.

• Composites Research
• /
• 제18권2호
• /
• pp.13-19
• /
• 2005

본 논문에서는 전단 변형을 받은 새틴 건직물을 이용하여 토우간격, 토우 두께. 토우 진폭변화 등의 토우 파라메터의 미소 변형을 관찰하였다. 재료 내부에 발생한 평면 하중에 따른 관찰 결과를 평가하기 위해 일방향 편향 인장실험과 이축 인장실험 결과와 비교하였다. 불균일한 하중분포를 유발하는 정렬 불일치각을 가지는 재료의 사진틀 전단실험 곁과 인장방향과 압축방향의 토우에서와 다른 변형 거동을 보이는 것을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제52권6호
• /
• pp.1177-1191
• /
• 2014

Reinforced concrete (RC) shear walls are one of the most commonly used lateral-load resisting systems in high-rise buildings. RC Parallel redundancy walls studied herein consist of two parts nested to each other. These two parts have different mechanical behaviors and energy dissipation mechanisms. In this paper, experimental studies of four 1/2-scale specimens representing this concept, which are subjected to in-plane cyclic loading, are presented and test results are discussed. Two specimens consist of a wall frame with barbell-shaped walls embedded in it, and the other two consist of a wall frame and braced walls nested each other. The research mainly focuses on the failure mechanism, strength, hysteresis loop, energy dissipation capacity and stiffness of these walls. Results show that the RC parallel redundancy wall is an efficient lateral load resisting component that acts as a "dual" system with good ductility and energy dissipation capacity. One main part absorbs a greater degree of the energy exerted by an earthquake and fails first, whereas the other part can still behave as an independent role in bearing loads after earthquakes.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.636-643
• /
• 2009

NHC means that the velocity of the vehicle in the plane perpendicular to the forward direction is almost zero. The main error source of NHC is the mounting misalignment which is the difference between the body frame of a land vehicle and the sensor frame of an inertial measurement unit. This paper suggests new NHC algorithm that can reduce position errors by real-time estimation of mounting misalignment. Then NHC/ZUPT integrated land navigation system is designed and its performances are analyzed by simulations with van test data. Simulation results show that the proposed NHC/ZUPT land navigation system improves navigation accuracy regardless of misalignment angle and is very useful when SDINS operates stand-alone for land vehicle navigation with large mounting misalignment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.466-472
• /
• 1996

The nonlinear analysis was perforned for a 2-bay 2-story moment-resisting reinforced concrete plane frame with seismic detail using KDARC 2D program. The analytical models consist of the material model, the member model, the hysteretic model, and the damage model etc. The conclusion based on the results of analysis is as following. : (1) Story shear-displacement relationship is similar to the experiment result but from the energy point of view, the analysis relationship is similar to the experiment result but from the energy point of view, the analysis result was different from the experiment result. (2) Plastic hinges were found to occur mainly in beams at first story while all the columns had plastic hinges throughout the structure. (3) Failure mode is a little different from experiment result in the yielding mechanism. (4) Damage index isabout 0.25. This means that the degree of damage is moderate and can be repairable.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.14-15
• /
• 2019

The demand for drywall is increasing as the structural type of apartment building is changing to a rigid frame structure. At present, the thickness of the gypsum board used for drywall is mostly 9.5mm and is required to be changed to 12.5mm to improve the performance of the wall. A structural safety test has been conducted in accordance with KS F 2613 to verify the effect of changing the thickness of the gypsum board to 12.5mm in terms of improvement as to stiffness. As a result of the test, the stiffness of the drywall has increased by about 19.6% and the impact resistance by about 30.4%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권9호
• /
• pp.3196-3210
• /
• 2014

This paper presents a novel video metrology approach based on robust tracking. From videos acquired by an uncalibrated stationary camera, the foreground likelihood map is obtained by using the Codebook background modeling algorithm, and the multiple moving objects are tracked by a combined tracking algorithm. Then, we compute vanishing line of the ground plane and the vertical vanishing point of the scene, and extract the head feature points and the feet feature points in each frame of video sequences. Finally, we apply a single view mensuration algorithm to each of the frames to obtain height measurements and fuse the multi-frame measurements using RANSAC algorithm. Compared with other popular methods, our proposed algorithm does not require calibrating the camera, and can track the multiple moving objects when occlusion occurs. Therefore, it reduces the complexity of calculation and improves the accuracy of measurement simultaneously. The experimental results demonstrate that our method is effective and robust to occlusion.

• 한국전산구조공학회논문집
• /
• 제18권2호
• /
• pp.169-179
• /
• 2005

탄성 및 비탄성좌굴 고유치해석법을 이용하여 강절프레임의 보-기둥부재의 유효좌굴길이를 산정하는 개선된 방법을 제시한다. 이를 위하여 먼저 설계기준에 제시된 압축재의 내하력 곡선식으로부터 접선계수이론(tangent modulus theory)에 근거하여 세장비-접선계수(tangent modulus), 응력-변형률 곡선식을 유도한다. 이때 안정함수를 이용하여 보-기둥요소의 접선강성행렬을 얻고, 비탄성 좌굴 고유치해석법을 제시하며 이를 이용하여 유효좌굴길이를 산정하는 방법을 제시한다. 해석예제를 통하여 강절프레임에 탄성 및 비탄성좌굴해석법에 의한 유효좌굴길이 비교결과를 제시하고, 매개변수 연구 결과를 제시한다.

• Structural Engineering and Mechanics
• /
• 제13권5호
• /
• pp.465-478
• /
• 2002

This study lays emphasis on the development of efficient analytical models for a multistory structure with wings, including the in-plane deformation of floor slabs. For this purpose, a multistory structure with wings is regarded as the combination of multistory structures with rectangular plan and their junctions. In addition, a multistory structure with a rectangular plan is considered to be an assemblage of two-dimensional frames and floor slabs connecting two adjacent frames at each floor level. This modeling, concept can be easily applied to multistory structures with plans in the shape of L, T, Y, U, H, etc. To represent the in-plane deformation of floor slabs efficiently, a two-dimensional frame and the floor slab connecting two adjacent frames at each floor level are modeled as a stick model with two degrees of freedom per floor and a stiff beam with shear deformations, respectively. Three models are used to investigate the effect of in-plane deformation of the floor slab at the junction of wings on the seismic behavior of structures. Based on the comparison of dynamic analysis results obtained using the proposed models and three-dimensional finite element models, it could be concluded that the proposed models can be used as an efficient tool for an approximate analysis of a multistory structure with wings.