References
- Oh, S. I., and Kobayashi, S., 'Finite element analysis of plante strain sheet bending,' Int. J. Mech. Sci., Vol. 22, pp. 583-594, 1979 https://doi.org/10.1016/0020-7403(80)90020-X
- Tang, S. C., and Chappuis, L. B., 'Analysis of sheet metal forming process by a general thin shell element,' Proc. NUMIFORM '89, pp. 507-514, 1989
- Wang, N.M.;Budiansky,B. Analysis of sheet metal stamping by a finite element method J. Appl. Mech. Trans. ASME
- Honecker,A.;Mattiason,K. Finite element procedures for 3D sheet forming simulation Proc. NUMIFORM '89
- Hallquist, J. O., Wainscott, B., and Schweizerhof, K., 'Improved simulation of the sheet metal forming using LS-DYNA3D on parallel computers,' Proc. NUMISHEET '93, pp. 137-160, 1993
- Yang, D. Y., Chung, W. J., Song, I. S., Yoo, D. J., and Lee, J. H., 'Comparative investigation into implicit, explicit and iterative implicit/explicit schemes for simulation of sheet metal forming processes,' Proc. NUMISHEET '93, pp. 35-52, 1993
- Hughes, T. J. R., and Liu, W. K., 'Nonlinear finite element analysis of shells: Part Ⅰ. Three-dimensional shells,' Comp. Meth. Appl. Mech. Eng., Vol. 26, pp. 331-362, 1981 https://doi.org/10.1016/0045-7825(81)90121-3
- Belytschko, T., Lin, J. I., and Tsay, C. S., 'Explicit algorithms for the nonlinear dynamics of shells,' Comp. Meth. Appl. Mech. Eng., Vol. 42, pp. 225-251, 1984 https://doi.org/10.1016/0045-7825(84)90026-4
- Zhu, Y., and Zacharia, T., 'A new one-point quadrature, quadrilateral shell element with drilling degrees of freedom,' Comp. Meth. Appl. Mech. Eng., Vol. 136, pp. 165-203, 1996 https://doi.org/10.1016/0045-7825(96)01059-6
- Finn, M. J., Galbraith, P. C., Wu, L., Hallquist, J. O., Lum, L., and Lin, T.-L., 'Use of a coupled explicit-implicit solver for calculating spring-back in automotive body panels,' J.Mat. Proc. Tech., Vol. 50, pp. 395-409, 1995 https://doi.org/10.1016/0924-0136(94)01401-L
- Geiger, M., 'Synergy of laser material processing amdn metal forming,' Annals of the CIRP, Vol. 43, pp. 563-570, 1994
- Prange, W., Schneider, C., and Selige, A. J., 'Application of Laser-Beam-Welded Sheet Metal,' SAE Tech. Paper Series, No. 890853, 1989
- Proc. 2nd Symposium on Sheet Metal Forming (eds., Oh, S. I., Keum, Y. T., and Kim, H. J,), The Korean Society for Technology of Plasticity, Korea, 1998
- Shi, M. F., Pickett, K. M., and Bhatt, K. K., 'Formability issues in the application of tailor welded blank sheets,' SAE Tech. Paper Series, No.930278, 1993
- Ahmad, S., Irons, B. M., and Zienkiewiz, O. C., 'Analysis of thick and thin shell structures by curved finite elements.' Int. J. Num. Meth. Eng., Vol. 2, pp. 419-451, 1970 https://doi.org/10.1002/nme.1620020310
- Belytschko, T., Tsay, C. S., and Liu, W. K., 'A stabilization matrix for the bilinear Mindlin plate element,' Comp. Meth. Appl. Mech. Eng., Vol. 29, pp. 313-327, 1981 https://doi.org/10.1016/0045-7825(81)90048-7
- Belytschko,T. and Leviathan,I. Projection schemes for one-point quadrature shell elements Comp. Meth. Appl. Mech. Eng., Vol.115, pp.277-286, 1994 https://doi.org/10.1016/0045-7825(94)90063-9
- Belytschko, T., and Leviathan, I., 'Physical stabilization of 4-node shell element wit one-point quadrature,' Comp. Meth. Appl. Mech. Eng., Vol. 113, pp. 321-350, 1994 https://doi.org/10.1016/0045-7825(94)90052-3
- Hill,R. A theory of the yielding and plastic flow of anisotropic metals Proc. Royal Soc. London Series A
- Barlat, F., Lege, D. J., and Berm, J. C., 'A six-component yield function for anisotropic materials,' Int. J. Plasticity, Vol. 7, pp. 693-712, 1991 https://doi.org/10.1016/0749-6419(91)90052-Z
- Zhong, Z. H., Finite Element Procedures for Contact-Impact Problems, Oxford University Press, New York, 1993
- Proc. NUMISHEET '93 (eds., Machinouchi, A., Nakamachi, E., Onate, E., and Wagoner, R. H.), 1993
- Proc. NUMISHEET '93 Machinouchi,A.(ed);Nakamachi,E.(ed);Onate,E.(ed);Wagoner,R.H.(ed)