• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.4
• /
• pp.553-564
• /
• 1994

Using Sirognathograph Analyzing System, the patterns of chewing movement were analyzed into opening phase and closing phase, each phase to frontal plane, horizontal plane, and sagittal plane by maruyama's classification. In opening phase, the chewing patterns of frontal plane were classifed into Chopping Opening, Grinding Opening, Concave Opening, Lateral Shift Opening, Vertical Guide Opening, Convergence Opening. Those of horizontal plane were classified into Chopping Opening, Grinding Opening, Concave Opening, Protrusive Shift Opening, Posterior Guide Opening, Convergence Opening. Those of sagittal plane were classified into Normal Opening, Protrusive Shift Opening, Vertical Guide Opening, Convergence Opening. In closing phase, the chewing patterns of frontal plane were classified into Normal Closure, Concave Closure, Lateral Shift Closure, Lateral Guide Closure, Vertical Guide Closure, Convergence Closure, Those of horzontal plane were classified into Normal Closure, Concave Closure, Lateral Shift Closure, Protrusive Shift Closure, Lateral Guide closure, Posterior Guide Closure, Convergence Closure. Those of sagittal plane were classified into Normal Closure, Protrusive Shift Closure, Vertical Guide. Closure, Convergence Closure. Results were summarized as follows : 1. Opening phase in chewing movement The Normal Openings in 3 planes(frontal, horizontal, sagittal), the Concave Openings in frontal plane and horizontal plane, the Vertical Guide Opening in frontal plane and the Posterior Guide Opening in horizontal plane were many observed. 2. Closing phase in chewing movement The Concave Closure in frontal and horizontal plane, the Normal Closure in 3 planes (frontal, horizontal, sagittal), the Concave Closure in horizontal plane were many observed.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.3
• /
• pp.187-192
• /
• 2002

In-plane ESPI(Electronic Speckle Patten Interferometry)was devised to measure in~plane defamation and rotation of a specimen with laser in this study. The conventional measuring methods of surface deformations such as the strain gauge have many demerits because they are contact and point-to-point measuring ones. But that ESPI is noncontact, nondestructive and whole field measuring method can overcome previous disadvantages. We used ESPI which is sensitive to in-plane displacement for measuring in-plane deformations of a disk. First of all, the system calibration was done due to an in-plane rotation before getting deformations of a disk. Finally we showed good agreement between theexperiment results and those of the FEA(Finit Element Analysis).

• Journal of the Korean Mathematical Society
• /
• v.43 no.6
• /
• pp.1169-1181
• /
• 2006

We introduce a new biharmonic kernel for the upper half plane, and then study the properties of its relevant potentials, such as the convergence in the mean and the boundary behavior. Among other things, we shall see that Fatou's theorem is valid for these potentials, so that the biharmonic Poisson kernel resembles the usual Poisson kernel for the upper half plane.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.2
• /
• pp.88-95
• /
• 2011

Stereo matching is the research area that regarding the estimation of the distance between objects and camera using different view points and it still needs lot of improvements in aspects of speed and accuracy. This paper presents a fast stereo matching algorithm based on plane-converging belief propagation that uses message passing convergence in hierarchical belief propagation. Also, stereo matching technique is developed using GPU and it is available for real-time applications. The error rate of proposed Plane-converging Belief Propagation algorithm is similar to the conventional Hierarchical Belief Propagation algorithm, while speed-up factor reaches 2.7 times.

• Journal of Magnetics
• /
• v.14 no.4
• /
• pp.137-143
• /
• 2009

The convergence behavior of the all-electron full-potential linearized augmented plane-wave (FLAPW) method with the explicit orthogonalization (XO) scheme is tested on ferromagnetic bulk body-centered-cubic Fe. Applying a commonly used criterion relating the plane-wave and angular momentum cutoffs, $l_{max}\;=\;R_{MT}K_{max}$, where $R_{MT}$ is the muffin-tin (MT) sphere radius and $K_{max}$ is the plane-wave cutoff for the basis - the total energy is converged and stable for $K_{max}R_{MT}$ = 10. The total energy convergence dependence on the star-function cutoff, $G_{max}$, is minimal and so a $G_{max}$ of 3$K_{max}$ or a large enough $G_{max}$ is a reasonable choice. We demonstrate that the convergence with respect to $l_{max}$ or a fixed large enough $G_{max}\;and\;K_{max}$ are independent, and that $K_{max}$ provides a better measure of the convergence than $R_{MT}K_{max}$. The dependence of the total energy on $R_{MT}$ is shown to be small if the core states are treated equivalently, and that the XO scheme is able to treat systems with significantly smaller $R_{MT}$ than the standard LAPW method. For converged systems, the calculated lattice parameter, bulk modulus, and magnetic moments are in excellent agreement with the experimental values.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1149-1152
• /
• 1999

In this paper we analyzed each region of specific points and ｅ-Δｅphase plane in order to make fuzzy rule base. After we composed the fuzzy control rules which can decrease rise time, delay time, maximum overshoot than basic fuzzy control rules. The composed method are converged more rapidly than single rule base in convergence region. Proposed method is alternately use at specific points of ｅ-Δｅphase plane with two fuzzy control rules, that is one control rule occruing the steady state error used in transient region and another fuzzy control rule use to decrease the steady state error and rapidly converge at the convergence region. Two fuzzy control rules in the ｅ-Δｅ phase plane decide the change time according to response characteristics of plants. As the results of simulation through the second order plant and the delay time plan, Proposed dual fuzzy control rules get the good response compare with the basic fuzzy control rule.

• Journal of Korean Association for Spatial Structures
• /
• v.4 no.4 s.14
• /
• pp.99-111
• /
• 2004

An exact solution procedure is formulated for the free vibration and buckling analysis of rectangular plates having two opposite edges simply supported when these edges are subjected to linearly varying normal stresses. The other two edges may be clamped, simply supported or free, or they may be elastically supported. The transverse displacement (w) is assumed as sinusoidal in the direction of loading (x), and a power series is assumed in the lateral (y) direction (i.e., the method of Frobenius). Applying the boundary conditions yields the eigenvalue problem of finding the roots of a fourth order characteristic determinant. Care must be exercised to obtain adequate convergence for accurate vibration frequencies and buckling loads, as is demonstrated by two convergence tables. Some interesting and useful results for vibration frequencies and buckling loads, and their mode shapes, are presented for a variety of edge conditions and in-plane loadings, especially pure in-plane moments.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.1052-1060
• /
• 1989

Using a vortex stretching invariant term, the two-layer k-.epsilon. model has been modified to account for the extra staining of turbulence due to the mean-flow convergence and divergence. The calculations of turbulent boundary layers in a plane of symmetry are compared for experimental cases which are an axisymmetric body at an incidence of 15.deg.. The comparisons between the calculations and experimental data show that additional modifications to the dissipation rate equation have brought the significant improvement to the prediction of plane of symmetry boundary layers in the strong mean-flow convergence and divergence.

• Elastomers and Composites
• /
• v.53 no.4
• /
• pp.234-238
• /
• 2018

The influence of reinforcing UHMWPE powder on the tribological and mechanical properties of HDPE was investigated. The circularizing of UHMWPE powder was improved by high-speed rotation to enhance particle distribution and flowability. HDPE composites reinforced with UHMWPE powder in the range of 0-50 wt% were prepared by co-rotating twin screw extrusion. The abrasion resistance, plane friction coefficient, tensile strengths, and impact strengths of the composites were investigated as a function of the UHMWPE content. An increasing UHMWPE content decreased the plane friction coefficient and increased the abrasion resistance and impact strength. It is expected that HDPE composites reinforced with spherical UHMWPE powder particles can be used to improve the durability of products such as pipes in the future.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.19-19
• /
• 2004