• 한국결정성장학회지
• /
• 제10권1호
• /
• pp.5-12
• /
• 2000

Silicon carbide(SiC)는 뛰어난 전기적, 열적, 물리적 특성 때문에 내환경 전자소자용 반도체 재료로 널리 연구되고 있다. 본 연구에서는 화학기상증착법으로 단결정 6H-SiC 동종박막을 성장시키고 이의 성장 특성을 조사하였다. 특히, 몰리브덴 (Mo)-plate를 이용하여 SiC를 코팅하지 않은 graphite susceptor를 사용한 6H-SiC 동종박막 성장조건을 성공적으로 얻었다. 대기압 상태의 RF-유도가열식 챔버에서 CVD성장을 수행하였고, <1120> 방향으로 $3.5^{\circ}$off-axis된 기판을 사용하였다. 성장 박막의 결정성을 평가하기 위하여 Nomarski 관찰, 투과율 측정 , 라만 분광, XRD, 광발광(PL) 분광, 투과전자현미경(TEM) 측 정 등의 방법을 이용하였다. 이상과 같은 실험을 통하여, 본 연구에서는 성장온도 $1500^{\circ}C$, C/Si flow ratio ($C_3H_8$ 0.2 sccm, $SiH_4$ 0.3 sccm)인 성장조건에서 결정성이 가장 좋은 6H-SiC 동종박막을 얻을 수 있었다.

• 한국주거학회논문집
• /
• 제25권4호
• /
• pp.39-46
• /
• 2014

This research was for the investigation and analysis of the illustration of modular construction application which is different use by each school facility since modular construction related examples are rare in domestic situation, and it has a limitation because of its being basic research material for generating the basic form of modular construction. The research results are as followings. First, in case of school facility from illustration investigation results, module measurement of class modulation is as similar as $3m{\times}10m$, but in resident facility the planning of more flexible plane shape can be possible since modules of 6 cases are free and various, and facade form of various types can be appeared by combination of module unit. Second, as a result of the generated characteristics in compared analysis of representative examples, school facilities were highly indicated for movability and duration reduction areas, and the flexibility, economic efficiency, and environment-friendliness was indicated low relatively. Third, the basic planning types of modular construction can be largely divided into layered type, horizontal (straightway) type, and compound type. The layered type has a short traffic line and facility system and is appropriate for the low-rise form unless separate construction method is used since it is susceptible to load. The horizontal type is advantageous for securing an opening since it has wide extent in light but has a long traffic line and facility system. Finally, the compound type can be possible for planning of various forms but needs the combination of various unit modules and traffic line and facility plan for it can be difficult.

• Transactions on Electrical and Electronic Materials
• /
• 제7권6호
• /
• pp.313-318
• /
• 2006

This paper introduces a partial discharge (PD) severity metric, S, based on the evaluation of time-sequence PD data capture and resulting Time-Sequence-Analysis Discharge (TSAD) level distributions. Basically based on an IEC60270 measurement technique, each PD event is time stamped and the discharge level noted. By evaluating the time differences between a previous and subsequent discharge, a 3D plot of time-sequence activity and discharge levels can be produced. From these parameters a measurement of severity, which takes into account dynamic or instantaneous variations in both the time of occurrence and the level of discharge, rather than using standard repetition rate techniques, can be formulated. The idea is to provide a measure of the severity of PD activity for potentially measuring the state of insulation within an item of plant. This severity measure is evaluated for a simple point-plane geometry in $SF_{6}$ as a function of gap distance and applied high voltage. The results show that as the partial discharge activity increases, the severity measure also increases. The importance of future investigations, quantifications and evaluations of the robustness, sensitivity and importance of such a severity measurement, as well as comparing it with typical repetition rate assessment techniques, and other monitoring techniques, are also very briefly discussed.

• Transactions on Electrical and Electronic Materials
• /
• 제10권3호
• /
• pp.93-96
• /
• 2009

The Al-doped ZnO (AZO) films were deposited on a glass substrate by RF magnetron sputtering in pure Ar and $Ar+H_2$ gas ambient at temperature of $100^{\circ}C$ and annealed in hydrogen ambient at the temperature range from 100 to 300 $^{\circ}C$, respectively. It was found that either the addition of hydrogen to the sputtering gas or the annealing treatment effectively reduced the resistivity of the AZO films. When the AZO films were annealed at the temperature of 300 $^{\circ}C$ for lhr in a hydrogen atmosphere, the resistivity decreased from $2.60{\times}10^{-3}\;{\Omega}cm$ to $8.42{\times}l0^{-4}\;{\Omega}cm$ for the film deposited in pure Ar gas ambient. Under the same annealing conditions of temperature and hydrogen ambient, the resistivity of AZO films deposited in the $Ar+H_2$ gas mixture decreased from $8.22{\times}l0^{-4}\;{\Omega}cm$ to $4.25{\times}l0^{-4}\;{\Omega}cm$. The lowest resistivity of $4.25{\times}l0^{-4}\;{\Omega}cm$ was obtained by adding hydrogen gas to the deposition and annealing process. X-ray diffraction (XRD) pattern of all films showed preferable growth orientation of (002) plane. The average transmittance is above 85 % and in the range of 400-1000 nm for all films.

• 복식
• /
• 제54권5호
• /
• pp.155-166
• /
• 2004

OP-Art was not appreciated by painters and art critics. and according1y has been forgotten in art history. But recently Op-Art is revitalized in fashion and is in its palmy days. This study intends to re-assess the value of Op-Art, by reviewing its influence on fashion design in the post-modern society To this purpose, conceptual characteristics of Op-Art was analyzed. And then, on the bases of these characteristics, the figural characteristics and the meaning of Op-Art in fashion design of post-modern society was re-explained. Op-Art is characterized as an art of flatness of picture plane which uses repetition of simple forms and colors. It is also based on trick of visual perception. Finally. it creates an impression which is flickering or vibrating by means of optical illusion. These characteristics give birth to some features such as simplicity. anonymity and mobility in the Op-Art fashion. The meanings of Op-Art in fashion design in post-modern society are as follows. First, repetition of simple units employed in Op-Art produces feeling of simplicity. which makes the Op-Art fashion works perceived as polysemy. In other words, the feeling of simplicity can be interpreted In diverse perspectives within the social context of our society. The material civilization and technology civilization, which causes the alienation and standardization of man. can be the backgrounds of the Op-Art fashion. Second, Op-Art is an art based on perspectives of spectators. Anonymity in the Op-Art fashion enhances participation of spectators. which gives Op-Art a sense of affinity. Third, through the feeling of mobility created by optical illusion techniques. the Op-Art fashion expresses the opposition to the ideal body image made by power group. In post-modern society, Op-Art in fashion gives new meaning to art. Op-Art in fashion proposes new roles of artist and spectators, and new concepts of art related with roles of human beings. Through general sensibility of men, Op-art in fashion can express new recognition of the post-modern society.

• 플랜트 저널
• /
• 제8권4호
• /
• pp.45-54
• /
• 2012

석탄화력발전소의 건설사업비를 국내 500 MW급 석탄화력발전소를 대상으로 확률적 모의실험 방법인 몬테카를로 시뮬레이션을 통해 추정하였다. 물가상승률을 적용한 실적 건설사업비에 확률적 모의실험 이론을 적용하였고, 전산 모사 소프트웨어를 통하여 건설사업비를 추정하였다. 확률적 모의실험을 통한 국내 500 MW급 석탄화력발전소의 총 건설사업비는 2011년 12월 불변가 기준, 신뢰수준 95%에서 인접발전소가 없는 경우 약 1조 8,700억 원에서 2조 3,300억 원이며 토목공사의 비중과 민감도가 높은 것으로 나타났고, 인접발전소가 있는 경우 약 1조 2,400억 원에서 1조 5,900억 원이며 기자재비의 비중과 민감도가 높으며, 건설사업비 추정시 물가상승률을 적용해야 적합한 결과가 도출되는 것으로 나타났다.

• 플랜트 저널
• /
• 제14권2호
• /
• pp.33-38
• /
• 2018

본 연구에서는 순환유동층보일러의 베드가 과열되어 층 물질의 소결이 발생하고 노 내 유동물질에 의해 보일러튜브가 마모 되는 것을 최소화하기 위하여, 노 하부 베드의 층 물질량 조정을 통한 베드 온도 변화를 실험적으로 연구하였다. 실험은 300MW급 순환유동층보일러인 여수화력 2호기를 대상으로 하였으며 터빈출력, 석탄소비량, 공기량 등을 고정한 상태에서 층 물질 양을 감소시켜 베드 압력을 설계값 4.5KPa에서 2.5KPa까지 감소시켰다. 결론적으로 층 물질 양을 적정하게 줄이면 베드 온도가 저하 되나, 지속적으로 저하되지 않는 것을 확인 하였으며, 베드 압력 3.0KPa, 즉 베드 물질량 110 톤을 변곡점으로 하여 베드 온도는 상승하기 시작하였다. 층 물질량이 충분히 많은 상태에서, 층 물질량이 감소되면 베드 온도는 저하되며, 층 물질량이 적정량 보다 적으면 노 내 유동물질의 순환량 감소로 베드 온도는 상승함을 알 수 있었다. 또한 유동층보일러에서 베드 온도 변화는 단순히 층 물질의 양 뿐만 아니라, 보일러 용량 및 연료의 성상 등에 따라 변화 추이가 매우 다양하게 나타난다는 것을 알 수 있었다.

• 마이크로전자및패키징학회지
• /
• 제26권4호
• /
• pp.141-148
• /
• 2019

모바일 기기로 사용되는 전자기판은 여러 가지 다양한 재료로 구성되어 있으며, 제조시나 사용 환경에서 온도가 변하면 각 재료의 열팽창 계수의 차이로 인하여 변형과 응력집중이 발생하게 된다. 그림자 무아레 방법은 비접촉으로 전체 영역에 걸친 면외변위를 측정하는 광학적 방법이지만 고감도 적용을 위해서는 탈봇 현상의 극복이 필요하다. 본 논문에서는 그림자 무아레 기법에서 발생하는 탈봇 현상을 극복하기 위하여 다양한 파장의 LED 광원을 이용하고, 파장의 변화가 탈봇 거리에 미치는 영향에 대해 연구하였다. 위상 이동법을 이용함으로써 10 ㎛/fringe 이내의 측정 감도를 확보할 수 있는 실험방법을 제안하고 이를 평가하였으며, 이 방법을 모바일 회로 기판의 열변형 측정에 적용하였다. 백색광을 사용한 경우에서는 탈봇 현상으로 인하여 측정이 불가능한 영역이 여러 군데 존재하였으나, 파란색 LED 광을 사용한 경우에는 대부분의 영역에서 감도 6.25 ㎛/fringe의 정밀한 무아레 무늬를 얻어낼 수 있음을 확인하였다.

• 전산구조공학
• /
• 제7권4호
• /
• pp.103-111
• /
• 1994

앞의 논문 Part 1 에서 유도한 변분원리를 이용하여 복합재료적층판의 진동해석을 할 수 있는 유한요소해석 모델을 개발하였다. 이 모델에서는 어느 한 층의 면내 변위와 나머지층 단면의 회전각, 그리고 판 전체의 연직방향처짐을 절점변수로 취하게 되어 n개층으로된 적층판의 경우 2(n+1)+1의 절점 자유도를 갖는다. 따라서, 판의 주변에서는 한층의 면내변위와 각층단면의 회전각을, 판의 면내에서는 연직방향 처짐을 경계조건값으로 정의할 수 있다. 이 모델에 의해 개발한 프로그램을 이용하여 각층의 재료특성이 크게 다른 혼종형 복합재료적층판(hybrid laminate)의 고유진동문제를 해석하였다. 탄성이론해 및 다른 유한요소해석결과와 본 해석결과와의 비교를 통해 제시모델이 기존의 다른 유한요소모델보다 정확함을 예시하였다.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.153-168
• /
• 2003

It is very important to arrange the artificial teeth correctly in bucco-lingual (labio- lingual) relation in reconstrcting dentition. Although many anatomic landmarks and techniques have been reported over the years, they are based on westerns. So this study was performd to examine the horizontal relations of mandibular teeth in Korean dentulous adults. 200 volunteers(mean age 22.9) who had natural dentition were selected. The impressions were taken with irreversible hydrocolloid impression material and mandibular study models were fabricated using class I dental stone. Then they were measured with 3-dimensional measuring device specially designed for this study. The results were as follows ; It is better to consider the lingual cusps of the lower posterior teeth as a guide than the linguoaxial surfaces of the lower posterior teeth, arranging the lower posterior teeth buccally to the line which starts from the mesial aspect of the lower canine and continue backward to the lingual aspect of the retromolar pad. It is better to arrange the fossae of the lower posterior teeth buccally to the line which starts from the cusp tip of the lower canine and continue backward to the top of the retromolar pad. The positions of the lower posterior teeth in the denture-bearing area ; considering the fossa as a guide, the 2nd premolar was positioned in center. considering the buccal cusp as a guide, the 1st molar and the 2nd molar were positioned in center. the distance ratio(d/a) was incresed constantly from the lower canine to the 2nd molar d ; the distance between the buccal vestibule(the lowest point) and the buccal cusp tips of the lower posterior teeth. a ; the distance between the buccal vestibule(the lowest point) and the lingual vestibule(the lowest point). The lower canine was positioned lingually($0.11{\pm}0.13$) than the labial vestibule, and the central incisor and the lateral incisor were positioned almost in the imaginary perpendicular plane of the labial vestibule(the lowest point).