• 한국정보전자통신기술학회논문지
• /
• 제1권3호
• /
• pp.3-8
• /
• 2008

본 논문에서는 H 평면에서 전방향성 방사패턴을 갖고 저자세를 갖는 평면형 안테나를 제안하였다. 전기적 소형 모노폴 안테나가 갖는 캐패시턴스 성분에 인덕티브 성분의 ENG(Epsilon Negative) 쉘 구조를 부설함으로써 임피던스를 매칭시켰다. ENG 쉘 구조는 4개의 계단형 L-슬롯으로 대칭된 인덕티브 로딩 구조로 이루어져 있다. 실제측정 결과 제안된 안테나의 임피던스 대역폭 ($VSWR{\leq}2$)은 150MHz (2.5 ~ 2.65GHz)를 나타내었고 최대 방사 이득은 중심 주파수 2.56GHz에서 1.12dBi를 나타내었으며 전방향성 방사패턴을 나타내었다. 제안된 안테나는 저자세 높이와 전방향성 방사를 요구하는 시스템에 적용될 수 있을 것으로 사료된다.

• 한국자기학회지
• /
• 제11권5호
• /
• pp.179-183
• /
• 2001

Glass/Ni$_{83}$Fe$_{17}$(2 nm)/[Cu(2 nm)Ni$_{83}$Fe$_{17}$(20 nm)]$_{50}$ 다층박막의 평면 홀 효과를 측정하였다. 평면 홀 효과에서 반복된 톱니모양의 홀 효과 신호가 관측되었다. 그 원인으로 갑작스러운 자벽의 이동이 홀 효과로 관측된 것이라는 가설을 세울 수 있다. 이러한 톱니모양의 평면 홀 효과는 모든 측정방향에서 관측되었다. 각 자성층의 전체 자화만이 자기저항을 결정하므로 자기저항의 특성곡선에서는 이러한 톱니모양에 해당하는 신호가 관측되지 않았다. 톱니모양의 근본 원인에 대한 연구는 더욱 수행되어야할 것이다.것이다.

• 한국재료학회지
• /
• 제4권7호
• /
• pp.741-749
• /
• 1994

The planar solid oxide fuel cell(SOFC) contains several ceramic materials depending on its structure and has rdfractory metal parts for manifolds, shrouds and current leads. Among ceramic materials for planar SOFC, joining of lanthanum chromite separator and yttria stabilized zirconia(YSZ) electoyte in planar SOFC stack to give strong gas tight seals is necessary for satisfactory operation and high performance. Nevertheless, for planar SOFC/sub s/, how to seal the cell stack and gas manifold remains as one of the unsolved problems. Therefore, in this study. we investigated the joining of sintered lanthanum chromite and YSZ pellets using unsintered lanthanum chromite green films as sealent. Scanning electron microscopy(SEM) and energy dispersive X-ray analysis(EDX) revealed that Ca in the sealing material diffused and dissolved into YSZ and sintered lanthanum chromite, and unsintered lanthanum chromite green films reacted with YSZ to from a new phase at the interface. Also, the densification of unsintered lanthanum chromite green films was inpeded by the Ca migration.

• ETRI Journal
• /
• 제45권1호
• /
• pp.138-149
• /
• 2023

In this study, the problem of blind signal separation for coprime planar arrays is investigated. For coprime planar arrays comprising two uniform rectangular subarrays, we link the signal separation to the tensor-based model called coupled canonical polyadic decomposition (CPD) and propose an improved coupled trilinear decomposition approach. The output data of coprime planar arrays are modeled as a coupled tensor set that can be further interpreted as a coupled CPD model, allowing a signal separation to be achieved using coupled trilinear alternating least squares (TALS). Furthermore, in the procedure of the coupled TALS, a Vandermonde structure enforcing approach is explicitly applied, which is shown to ensure fast convergence. The results of Monto Carlo simulations show that our proposed algorithm has the same separation accuracy as the basic coupled TALS but with a faster convergence speed.

• 대한전자공학회논문지TC
• /
• 제41권6호
• /
• pp.79-86
• /
• 2004

정확한 closed-form 근린함수 계산방법은 공간영역 그린함수에 포함된 Sommerfeld 적분의 계산시간을 줄이기 위해 기존에 이용되어온 복소 영상법(Complex image method)과 2단계 근사화법(Two-level approach)에 비해 훨씬 적은 오차를 갖는다. 본 논문에서는 정확한 closed-form 그린함수 계산방법을 일반적인 전원을 포함하는 평판구조에 적용하는 방법을 제안하였다.

• Advances in Computational Design
• /
• 제2권3호
• /
• pp.195-210
• /
• 2017

Simultaneous optimization of trusses which concurrently takes into account design variables related to the size, shape and topology of the structure is recognized as highly complex optimization problems. In this class of optimization problems, it is possible to encounter several unstable mechanisms throughout the solution process. However, to obtain a feasible solution, these unstable mechanisms somehow should be rejected from the set of candidate solutions. This study proposes triangular unit based method (TUBM) instead of ground structure method, which is conventionally used in the topology optimization, to decrease the complexity of search space of simultaneous optimization of the planar truss structures. TUBM considers stability of the triangular units for 2 dimensional truss systems. In addition, integrated particle swarm optimizer (iPSO) strengthened with robust technique so called improved fly-back mechanism is employed as the optimizer tool to obtain the solution for these class of problems. The results obtained in this study show the applicability and efficiency of the TUBM combined with iPSO for the simultaneous optimization of planar truss structures.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.1100-1103
• /
• 2019

본 논문에서는 기존의 3차원 구조의 슬리브모노폴 안테나(Sleeve monopole Antenna)를 모노폴과 접지면상의 작은 기생모노폴의 형태로 단순화하여도 비슷한 특성을 보이는 것을 확인하고 PCB상에 보다 광대역인 평면 슬리브모노폴 안테나의 설계 방법에 대해 다룬다. 설계 및 제작된 슬리브안테나는 평면형으로 메인 모노폴과 이에 근접하는 작은 사각형 슬리브로 구성되고 기존의 3차원 슬리브안테나와 비슷한 전방향(omni-directional)특성과 기존보다 46% 더 넓은 대역폭을 나타내었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권11호
• /
• pp.4463-4482
• /
• 2020

Mesh model generated from 3D reconstruction usually comes with lots of noise, which challenges the performance and robustness of mesh simplification approaches. To overcome this problem, we present a novel method for mesh simplification which could preserve structure and improve the accuracy. Our algorithm considers both the planar structures and linear features. In the preprocessing step, it automatically detects a set of planar structures through an iterative diffusion approach based on Region Seed Growing algorithm; then robust linear features of the mesh model are extracted by exploiting image information and planar structures jointly; finally we simplify the mesh model with plane constraint QEM and linear feature preserving strategies. The proposed method can overcome the known problem that current simplification methods usually degrade the structural characteristics, especially when the decimation is extreme. Our experimental results demonstrate that the proposed method, compared to other simplification algorithms, can effectively improve the quality of mesh and yield an increased robustness on noisy input mesh.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권10호
• /
• pp.2464-2478
• /
• 2013

Image stitching techniques produce an image with a wide field-of-view by aligning multiple images with a narrow field-of-view. While conventional algorithms successfully stitch images with a small parallax, structure misalignment may occur when input images contain a large parallax. This paper presents an image stitching algorithm that aligns images with a large parallax by regional linear warping. To this end, input images are first approximated as multiple planar surfaces, and different linear warping is applied to each planar surface. For approximating input images as multiple planar surfaces, the concept of dominant edges is introduced. Dominant edges are defined as conspicuous edges of lines in input images, and extracted dominant edges identify the boundaries of each planar surface. Dominant edge extraction is conducted by detecting distinct changes of local characteristics around strong edge pixels. Experimental results show that the proposed algorithm successfully stitches images with a large parallax without structure misalignment.

• Journal of electromagnetic engineering and science
• /
• 제17권4호
• /
• pp.202-207
• /
• 2017

This paper presents the performance of a planar, low-profile, and wide-gain-bandwidth leaky-wave slit antenna in different thickness values of high-permittivity gallium arsenide substrates at terahertz frequencies. The proposed antenna designs consisted of a periodic array of $5{\times}5$ metallic square patches and a planar feeding structure. The patch array was printed on the top side of the substrate, and the feeding structure, which is an open-ended leaky-wave slot line, was etched on the bottom side of the substrate. The antenna performed as a Fabry-Perot cavity antenna at high thickness levels ($H=160{\mu}m$ and $H=80{\mu}m$), thus exhibiting high gain but a narrow gain bandwidth. At low thickness levels ($H=40{\mu}m$ and $H=20{\mu}m$), it performed as a metasurface antenna and showed wide-gain-bandwidth characteristics with a low gain value. Aside from the advantage of achieving useful characteristics for different antennas by just changing the substrate thickness, the proposed antenna design exhibited a low profile, easy integration into circuit boards, and excellent low-cost mass production suitability.