• 대한조선학회지
• /
• 제27권3호
• /
• pp.31-37
• /
• 1990

선박의 방향안정성 등을 논할 때 필요하게 되는 선형조종미계수에 대해서는 이론적, 실험적으로 그 추정법이 제안되고 있다. 이중, 실험적 방법은 모형선에 규칙적인 강제동요를 시켜서 원하는 값들을 구하고 있으나, 한규칙 동요에 대해서 그 주파수에 대한 값만 나오므로 넓은 범위의 운동주파수에 걸쳐 미계수의 값들을 얻고자 할 때는 방대한 회수의 실험을 행해야 한다, 이러한 단점을 개선하기 위해 고안된 것이 본 논문에서 취급하는 Transient Maneuvering Method(TMM)로서, 기본원리는 모형에게 과도적 운동을 시켜 그로 인한 동유체력을 계측하고 이를 Fourier 변환하므로서 여러가지 주파수에 대한 미계수의 값을 얻게 되는 것이다. 종래의 이 분야 연구자들은 모형을 움직일 때 전동모터를 사용했으나 모터를 사용할 경우 원하는 과도 운동을 충분히 시킬 수 없으므로 본 논문에서는 유압 펌프를 사용하여 좋은 효과를 얻었다. 그 외에도 입력신호를 다소 개량하여 최종결과의 S/N비를 개선하는데 성공하였다. 실험에 사용한 모델은 Todd의 계열 60(Cb=0.7) 2M급이고, 이 결과를 종래의 PMM 시험결과와 비교하였다.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.15-21
• /
• 2006

Recently, the attention to large container ships whose size is greater than 10,000 TEU container ship has been increased due to their increasing demand. The large container ship has twin skegs because of the engine capacity and large beam-draft ratio. In this paper, the maneuvering characteristics of a container ship with twin skegs were investigated through 4DOF(four degree of freedom) HPMM(Horizontal Planar Motion Mechanism) test and computer simulation. A mathematical model for maneuvering motion with 4DOF of twin skegs system was established to include effects of roll motion on the maneuvering motion. And to obtain roll-coupling hydrodynamic coefficients of a container ship, 4DOF HPMM system of MOERI which has a roll moment measurement system was used. HPMM tests were carried out for a 12,000 TEU class container ship with twin skegs at scantling load condition. Using the hydrodynamic coefficients obtained, simulations were made to predict the maneuvering motion. Rudder forces of twin-rudders were measured at the angles of drift and rudder. The neutral rudder angles with drift angles of ship was quite different with those of single skeg ship. So other treatment of flow straightening coefficient $\gamma_R$ was used and the simulation results was compared with general simulation result. The treatment of experimental result at static drift and rudder test was very important to predict the maneuverability of a container ship with twin skegs.

• 대한조선학회논문집
• /
• 제59권5호
• /
• pp.296-305
• /
• 2022

In order to investigate maneuvering characteristics of KCS in waves, captive model test in regular waves was conducted. Purpose of the test is measuring maneuvering hull forces when ship is maneuvering in waves. Model test was carried out using CPMC (Computerized Planar Motion Carriage) of ocean engineering basin in KRISO (Korea Research Institute of Ships and Ocean engineering). Total 6 degrees-of-freedom motion were fixed by two points supporting captive model test device, which is specially designed for this test. This system estimates 6 degrees-of-freedom forces and moments through 12 strain gauge signals. Mapping matrix from strain gauge signals to 6 degrees-of-freedom forces and moments was derived by a well-organized calibration test. Static drift test was conducted in calm sea and in regular waves with various wave conditions. Hydrodynamic coefficients related to drift angle were extracted for each wave conditions, and the effect of waves on course stability was analyzed.

• 한국항해항만학회지
• /
• 제36권8호
• /
• pp.613-618
• /
• 2012

부선이 선미 예인되는 상황에서의 예부선 통합시뮬레이션을 수행하기 위하여, 본 연구에서는 부선 단독 조종성능 추정을 위한 구속모형실험을 수행하였다. 구속모형실험결과로부터 부선 실선의 저항성능을 추정하였고, 도출된 유체력 미계수를 이용하여 선회시뮬레이션을 수행하였다. 부선의 선회시뮬레이션을 위해 부선에 작용하는 예인력의 힘과 방향을 단순히 모델링하고, 예인줄 방향각 변화에 따른 선회시뮬레이션 결과 비교와 실선시운전시험결과와의 선회직경 비교를 통하여 수학모델을 검증하였다. 그 결과 예인줄 방향각이 커질수록 선회직경이 작아지는 정성적인 경향을 확인하였고, 실선시운전결과와 비교 시 배수량 차이 등에 의하여 선회직경이 작게 추정되는 결과를 확인하였다.

• 대한조선학회논문집
• /
• 제52권5호
• /
• pp.407-417
• /
• 2015

For the more accurate prediction on manoeuvring performance of a ship at initial design phase, bare hull manoeuvring coefficients were estimated by RANS(Reynolds Averaged Navier-Stokes) based virtual captive model tests. Hydrodynamic forces and moment acting on the hull during static drift and harmonic oscillatory motions were computed with a commercial RANS code STAR-CCM+. Automatic and consistent mesh generation could be implemented by using macro functions of the code and user dependency could be greatly reduced. Computed forces and moments on KCS and KVLCC 1&2 were compared with the corresponding measurements from PMM(Planar Motion Mechanism) tests. Quite good agreement can be observed between the CFD and EFD results. Manoeuvring coefficients and IMO standard manoeuvres estimated from the computed data also showed reasonable agreement with those from the experimental data. Based on these results, we could confirm that the developed virtual captive manoeuvring model test process could be applied to evaluate manoeuvrability of a ship at the initial hull design phase.

• 대한조선학회논문집
• /
• 제46권6호
• /
• pp.553-561
• /
• 2009

This paper presents the results of prediction of maneuverability of KCS by CPMC captive model test. The CPMC(Computerized Planar Motion Carriage) with captive model test equipment is installed at Ocean Engineering Tank of MOERI. KCS is the container ship which was open to the world by MOERI. And the test results for the prediction of maneuverability were presented by NMRI in Japan. The research results about the maneuverability of KCS were presented at SIMMAN 2008 Workshop in Denmark. The results of test and simulation of this paper are compared with the results of simulation by MOERI using test results of NMRI and simulation results by NMRI.

• Structural Engineering and Mechanics
• /
• 제82권6호
• /
• pp.735-745
• /
• 2022

The suspension thyristor valve can generate tremendous vertical acceleration responses in layers and large tension forces in hangers. A shaking table test of a scaled-down model of thyristor valves suspended on a hall building is performed to qualify the risk of vertical uplift of two representative types of valves, the chain valve and the rigid valve. Besides, an analytical model is established to investigate the source of the slackening of hangers. The test results show that the valves frequently experience a large vertical acceleration response. The soft spring joint can significantly reduce acceleration, but is still unable to prevent vertical uplift of the chain valve. The analytical model shows a stiffer roof and inter-story connection both contribute to a higher risk of vertical uplift for a rigid valve. In addition, the planar eccentricity and short hangers, which result in torsional motion of the valve, increase the possibility of vertical uplift for a chain valve. Therefore, spring joints with additional viscous dampers and symmetric layout in each layer are recommended for the rigid and chain valve, respectively, to prevent the uplift of valves.

• 방송공학회논문지
• /
• 제19권6호
• /
• pp.942-956
• /
• 2014

본 논문은 단안의 RGB 카메라를 이용하는 실시간 손 추적 방법을 제안한다. 손은 높은 degrees of freedom을 가지고 있기 때문에 손 추적은 높은 모호성을 가지고 있다. 따라서 제안하는 방법에서는 손 추적의 모호성을 줄이기 위해서 단계별 손 추적 전략을 채택하였다. 제안하는 방법의 추적 과정은 손바닥 포즈 추적, 손가락 yaw 움직임 추적, 그리고 손가락 pitch 움직임 추적, 세 단계로 구성되어 있으며, 각 단계는 순서대로 수행된다. 제안하는 방법은 손은 평면으로 간주할 수 있다고 가정하고, 평면 손 모델을 이용한다. 평면 손 모델은 손 모델을 현재의 사용자 손 모양에 맞춰서 변경하는 손 모델 재생성을 가능하게 하는데, 이는 제안하는 방법의 강건성과 정확도를 증가시킨다. 그리고 제안하는 방법은 실시간 연산이 가능하고 GPU 기반 연산을 요구하지 않기 때문에, Google Glass와 같은 모바일 장비를 포함한 다양한 환경에 적용가능하다. 본 논문은 다양한 실험을 통해서 제안하는 방법의 성능과 효용성을 입증한다.

• 한국인지과학회:학술대회논문집
• /
• 한국인지과학회 2000년도 춘계 학술대회
• /
• pp.76-86
• /
• 2000

Conventional atom model must be criticized on the following four points. (1) Natural motions between positive and negative entities are not circular motions but linear going and returning ones, for examples sexual motion, tidal motion, day and night etc. (2) Potential energy generation was neglected when electron changes its orbit from outer one to inner one. The hv is the kinetic energy of the photo-electron. The total energy difference between orbits comprises kinetic and potential energies. (3) The structure of the space must be taken into consideration because the properties of the electron do not change during the transition from outer orbit to inner one even though it produces photon. (4) Total energy conservation law applies to the energy flow between mind and matter because we daily experiences a interconnection between mind and body. $\prod$-rays come out from the crystallizing $\pi$-bondings when they vibrate or deform. Gaston Naessens(1950) invented a microscope, which can visualize the $\pi$-rays in blood. Unordinarily agglomerated spores of $\pi$-rays may provoke poor immunity and bad illness. The agglomerated spores of $\pi$-rays can make closed type $\pi$-bondings in the case of carbohydrates and esters but proteins build open type $\pi$-bondings because the peptide bonds are planar, which principle produces a life.

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.176-184
• /
• 2000

Recently, it becomes a very important issue to consider the mechanical systems such as high-speed vehicle and railway train moving on a flexible beam structure. Using general approach proposed in the first part of this paper, it tis possible to predict planar motion of constrained mechanical system and elastic structure with various kinds of foundation supporting condition. Combined differential-algebraic equations of motion derived from both multibody dynamics theory and Finite Element Method can be analyzed numerically using generalized coordinate partitioning algorithm. To verify the validity of this approach, results from simply supported elastic beam subjected to a moving load are compared with exact solution from a reference. Finally, parameter study is conducted for a moving vehicle model on a simply supported 3-span bridge.