• 한국공작기계학회논문집
• /
• 제16권2호
• /
• pp.70-77
• /
• 2007

The application of focused ion beam(FIB) technology has been broadened in the fabrication of nanoscale regime. The extended application of FIB is dependent on complicated reciprocal relation of operating parameters. It is necessary for successful and efficient modifications on the surface of silicon substrate. The primary effect by Gaussian beam intensity is significantly shown from various aperture size, accelerating voltage, and beam current. Also, the secondary effect of other process factors - dwell time, pixel interval, scan mode, and pattern size has affected to etching results. For the process analysis, influence of the secondary factors on FIB micromilling process is examined with respect to sputtering depth during the milling process in silicon material. The results are analyzed by the ratio of signal to noise obtained using design of experiment in each parameter.

• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.69-78
• /
• 2018

This paper presents a precise edge detection algorithm for the critical dimension (CD) measurement of a Thin-Film Transistor Liquid-Crystal Display (TFT-LCD) pattern. The sigmoid surface function is proposed to model the blurred step edge. This model can simultaneously find the position and geometry of the edge precisely. The nonlinear least squares fitting method (Levenberg-Marquardt method) is used to model the image intensity distribution into the proposed sigmoid blurred edge model. The suggested algorithm is verified by comparing the CD measurement repeatability from high-magnified blurry and noisy TFT-LCD images with those from the previous Laplacian of Gaussian (LoG) based sub-pixel edge detection algorithm and error function fitting method. The proposed fitting-based edge detection algorithm produces more precise results than the previous method. The suggested algorithm can be applied to in-line precision CD measurement for high-resolution display devices.

• Journal of Information Display
• /
• 제4권4호
• /
• pp.8-12
• /
• 2003

In this paper, we report relatively simple equalizing pulse method for reducing dynamic false contour in PDP. Calculation cost is reduced by limiting pixels to add equalizing pulse and using look-up-table(LUT) for given subfield pattern. Pixels to be modified are determined after comparing selected number of most significant bits(MSB) with those of adjacent pixels. The equalizing pulse amount is determined by consulting LUT, which is for a fixed velocity of 1 pixel/tv field. Even though the suggested scheme does not cover every luminance combination of neighboring pixels, it is expected to work well after appropriate modifications are made according to the velocity.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.187-190
• /
• 2003

In this paper, we propose an extrinsic calibration method for a multi-view camera to get an optimal pose in 3D space. Conventional calibration algorithms do not guarantee the calibration accuracy at a mid/long distance because pixel errors increase as the distance between camera and pattern goes far. To compensate for the calibration errors, firstly, we apply the Tsai's algorithm to each lens so that we obtain initial extrinsic parameters Then, we estimate extrinsic parameters by using distance vectors obtained from structural cues of a multi-view camera. After we get the estimated extrinsic parameters of each lens, we carry out a non-linear optimization using the relationship between camera coordinate and world coordinate iteratively. The optimal camera parameters can be used in generating 3D panoramic virtual environment and supporting AR applications.

• 한국지형공간정보학회:학술대회논문집
• /
• 한국지형공간정보학회 2005년도 아시아 태평양 국제 GSIS 학술발표회
• /
• pp.101-106
• /
• 2005

Vegetation shows unique spectrum characteristics compared with other materials. If such characteristics are used, land change pattern can be determined. Thus, vegetation has an absorption belt and a reflective belt in visible and near infrared, and reflectance is very high. Then, various methods of monitoring vegetation paying attention to the absorption wavelength region and reflective region of vegetation are proposed. However, there are various problems in grasping change of vegetation by NDVI, PVI, etc. It is very difficult especially to remove various noise ingredients in the received satellite data. Until now, it is difficult to compensate for shadow effect when NDVI is used in vegetation analysis. The results is, if the shadow is about 60% the pixel will be wrongly classified as may be vegetation or not.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1717-1722
• /
• 2003

In this paper we developed flip-chip bonder using XY stage, liner-rotary actuator and vision system. We depicted the major parts of the developed flip-chip bonder. Then we discussed several problems and their solutions such as vision and motion control, pick-up module position accuracy, separation of chip from the blue taped hoop, etc. We used a post guide to improve the horizontal positional accuracy against the long arm. Also, we used an ejector module and synchronization technique for easy chip separation from the blue tape.

• 전자공학회논문지B
• /
• 제32B권3호
• /
• pp.66-76
• /
• 1995

In this research, a mesh connected VLSI structure is proposed for the real time computation of the generalized Hough transform(GHT). The purpose of the research is to design a generalized Hough transformer that can be realized as a single chip processor. The GHT has been modified to yield a highly parallel structure consisting of simple processing elements(PEs) and communication networks. In the proposed structure, the GHT can be computed by first assigning an image pixel to a PE and performing shift and add operations. The result of the CAD circuit simulation shows that it can be computed in the time proportional to the number of pixels in the pattern. In addition to the Hough transformer, the peak detector has been designed to reduce 1)the number of the I/O operations between the transformer and the host computer and 2) the host computer's burden for peak detection by transmitting only the local peaks detected from the transformed accumulator. It is expected that the proposed single chip Hough transformer with peak detector makes a fast and inexpensive edge based object recognition systems possible for many industrial and military applications.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권6호
• /
• pp.2317-2337
• /
• 2015

Cryptography provides an effective solution to secure the communication over public networks. The communication over public networks that includes electronic commerce, business and military services, necessitates the requirement of simple and robust encryption techniques. In this paper, a novel image encryption method which employs calligraphy based hybrid scan and random number is presented. The original image is scrambled by pixel position permutation with calligraphy based diagonal and novel calligraphy based scan patterns. The cipher image is obtained by XORing the scrambled image with random numbers. The suggested method resists statistical, differential, entropy, and noise attacks which have been demonstrated with a set of standard images.

• Journal of Mechanical Science and Technology
• /
• 제14권5호
• /
• pp.518-529
• /
• 2000

A detailed and thorough parametric study of digital image correlation method is presented. A theoretical background and development of the method were introduced and the effects of various parameters on the determination of displacement outputs from the raw original and deformed image information were examined. Use of the normalized correlation coefficient, the use of 20 to 40 pixels for a searching window side, 6 variables searching, bi-cubic spline sub pixel interpolations and the use of coarse-fine search are some of the key choices among the results of parametric studies. The displacement outputs can be further processed with two dimensional curve fitting for the data noise reduction as well as displacement gradient calculation.

• International Journal of Advanced Culture Technology
• /
• 제4권3호
• /
• pp.48-55
• /
• 2016

Conventional techniques for solving the noise problem have problems to generate different results, depending on the image size and weight values of the used masks, and they require many operations by using a complex formula. In this paper, we propose an image enhancement algorithm to solve the noise problem in a simple, yet easy-to-use way. For this purpose, we determined the difference between the noise of the two adjacent pixels for the horizontal and vertical, and for the two diagonal directions that each of the noise problem occurred, and then we got the average value of these pixel values. Then, we solve the noise problem by using the optimal average value in accordance with occurrence of the noise in the horizontal and vertical, and two adjacent pixels in a diagonal direction. As a result, we got the result that the noise solution in a simple, yet easy-to-use method to obtain a resultant image.