• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.43-48
• /
• 2020

Open pit mines for limestone mining require rapid development of technologies and efforts to prevent safety accidents due to rapid deterioration of the slope due to deforestation and rapid changes in the topography. Accurate three-dimensional spatial information on the terrain should be the basis for reducing environmental degradation and safe development of open pit mines. Therefore, this study constructed spatial information about open pit mine using UAV(Unmanned Aerial Vehicle) and analyzed its utility. images and 3D laser scan data were acquired using UAV, and digital surface model, digital elevation model and ortho image were generated through data processing. DSM(Digital Surface Model) and ortho image were constructed using image obtained from UAV. Trees were removed using 3D laser scan data and numerical elevation models were produced. As a result of the accuracy analysis compared with the check points, the accuracy of the digital surface model and the digital elevation model was about 11cm and 8cm, respectively. The use of three-dimensional geospatial information in the mineral resource development field will greatly contribute to effective mine management and prevention of safety accidents.

• Journal of Oriental Neuropsychiatry
• /
• v.31 no.1
• /
• pp.1-12
• /
• 2020

Objectives: The purpose of this study was to evaluate the reliability and validity of the instrument on pattern identification for insomnia (PIT-Insomnia) and verify the correlation between PIT-Insomnia and psychological tests. Methods: Two evaluators examined the pattern identification of the participants who met insomnia disorder diagnostic criteria of the Diagnostic and Statistical Manual of Mental Disorder, Fifth Edition (DSM-5) and took the Insomnia Severity Index (ISI) score over 15 once manually and twice using the PIT-Insomnia to measure the inter-rater and test-retest reliability. We also conducted the following surveys: the Pittsburgh Sleep Quality Index (PSQI), the Korean version of Beck's depression inventory (K-BDI), the Korean version of the State-Trait Anxiety Inventory (STAI-K), the Korean Symptom checklist-95 (KSCL-95), and the EuroQol-5 dimension (EQ-5D), to measure concurrent validity and correlation between the PTI-Insomnia and psychological tests. Results: 1. The test-retest reliability analysis of the pattern identification results showed moderate agreement, and test-retest reliability analysis of each pattern identification score showed agreements from poor to moderate. 2. The inter-rater reliability analysis of the pattern identification results via manual showed slight agreement, when analysis was performed with calibration, the inter-rater reliability analysis of the pattern identification results via manual showed fair agreement. 3. The concordance analysis between results via manual and the PIT-Insomnia showed poor agreement, when the analysis was performed with calibration, concordance analysis showed fair agreement. 4. The concordance analysis between the PIT-Insomnia and the PSQI showed positive linear correlation. 5. The concordance analysis between the PIT-Insomnia and the PSQI, K-BDI, STAI-K, KSCL-95, and EQ-5D showed that non-interaction between the heart and kidney have positive linear correlation with the K-BDI, anxiety item of KSCL-95, dual deficiency of the heart-spleen have positive linear correlation with somatization item of KSCL-95, paranoia item of KSCL-95, heart deficiency with timidity have positive linear correlation with stress vulnerability item of KSCL-95, parania item of KSCL-95, phlegm-fire harassing the heart have positive linear correlation with K-BDI, paranoia item of KSCL-95, depressed liver qi transforming into fire have positive linear correlation with the anxiety item of KSCL-95, parania item of KSCL-95, all pattern identification have negative linear correlation with EQ-5D. Conclusions: The PIT-Insomnia has moderate agreement of reliability and reflects the severity of insomnia since it has some concurrent validity with the PSQI. There are some correlations between the PTI-Insomnia with specific psychological tests, so we could suggest it can be used appropriately in the clinical situation.

• Journal of dental hygiene science
• /
• v.9 no.4
• /
• pp.469-474
• /
• 2009

The purpose of this study was to examine the satisfaction level of parents with elementary school students in some metropolitan areas with the pit and fissure sealing program in a bid to raise awareness of the importance of the preventive treatment and accelerate the spread of it. The subjects in this study were 231 parents who had school children and resided in Seoul and Gyeonggi Province. After a self-administered survey was conducted in October and November 2008, the collected data were analyzed. The findings of the study were as follows; 1. As to places for receiving the preventive treatment, 111 respondents (48.1%) experienced pit and fissure sealing in dental clinics, and 88 respondents(38.1%) did that in dental hospitals. 177 people(76.6%) received that treatment from dentists, and 16 respondents(11.3%) did that from dental hygienists. 2. Concerning whether to be for or against the pit and fissure sealing program, more than half that numbered 143(61.9%) supported that program, and 88 respondents(38.1%) didn't. As for satisfaction level, they expressed the biggest satisfaction with the preventive effect of that treatment($3.92{\pm}.85$), and were least satisfied with the cost($1.91{\pm}.86$). 3. Regarding links between general characteristics and satisfaction level, they were statistically significantly different in satisfaction level with the cost according to residential area and the number of child, and age made a statistically significant difference to their satisfaction level with the preventive effect of it. 4. As for relationship between warranty term and whether to be for the pit and fissure sealing program or not, 45(31.5%) out of those who supported the program were provided with no warranty, and 32(36.4%) out of those who took a stand against it were provided with no warranty, either. Warranty was provided to 12(8.4%) respondents of the former group without a fixed term, but that's not the case for any of the latter. The warranty term made statistically significant differences to their agreement or disagreement to the program(p<0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.10 no.1
• /
• pp.77-83
• /
• 1983

The purpose of this study was to observe the microleakage of a pit and fissure sealant at the tooth-restoration interface. One hundred and sixty-seven extracted permanent and deciduous teeth were used and some simple mechanical pretreatment were done before etching. The degree of microleakage was assessed by $Ca^{45}$ after 24 hours, and 2 months. The results were as follows: 1. Among total 167 teeth, 53 teeth (32%) were demonstrated the microleakage. 2. After 2 months the leakage was increased from 22 percent to 35 percent in permanent teeth, and from 32 percent to 43 percent in primary teeth. 3. The group treated by fluoride paste was demonstrated the largest leakage, 50 percent in primary teeth and 33 percent in permanent teeth. There are more leakage in primary teeth (38%) than permanent teeth (28%).

• Korean Journal of Microbiology
• /
• v.29 no.2
• /
• pp.117-122
• /
• 1991

In order to improve the removal ability of phosphate, Spheroplast fusions were performed among auxotrophic mutants of Aeromonas hydrophila isolated from waste water, named A13 and A14, Aci37 auxotrophic mutant of Acinetobactercalcoaceticus, and auxotrophic E. coli HR262/pCE27 carring pit gene. Eight fusants obtained from this experiment showed different biochemical characteristics. When the rate of phosphate uptake among fusants (F1-F8) was investigated in Phosphate Uptake Medium (PUM), F8 strain showed the highest rate for phosphate removal, 7 times as much as control after two hours incubation. The role of cations ($Mg^{++}$ ,$Ca^{++}$ , $K^{+}$ in phosphate uptade by F8 was also investigated in PUM without each salt. $K^{+}$ seemed to be crucial. Being compared with phosphate untake rate in PUM, that in PUM without $K^{+}$ was reduced 1.5 times. Therefore, by applying F8 strain and $K^{+}$ in practical environmental system, the increased efficiency in phosphate removal can be derived.

• Corrosion Science and Technology
• /
• v.10 no.1
• /
• pp.37-42
• /
• 2011

Aluminum was electrochemically etched in acid solution and the surface area was magnified by the formation of etch pits. Etched aluminum was covered with a compact and dense dielectric oxide film by anodization and applied to the aluminum electrolytic capacitor electrode. Capacitance of aluminum electrolytic capacitor is closely related with surface area, which depends on size and number of etch pits. Size of etch pits need to be controlled because inside of the pits can be buried by the formation of dielectric oxide film. In this work, the effect of ultrasound pretreatment on the aluminum etch pit formation and capacitance were investigated. Additionally, the relationship between the second etching effect on pit size and capacitance was studied.

• Progress in Superconductivity and Cryogenics
• /
• v.1 no.2
• /
• pp.15-19
• /
• 1999

For large scale applications of high temperature superconductor (HTS) such as transmission cables, motors and generators, long length of flexible HTS conductor is required. Currently, Bi-2223 HTS tape is capable of being fabricated in longer than 100 m length by industrial processes. In this study, we fabricated 100 m 19 filamentary Bi-2223 ($Bi_{1.8}Pb_{0.4}Sr_2Ca_2O_{10+x}$) HTS tape by PIT (Power in Tube) process. Critical current(IC) of this long length tape was measured 18.5 A at 77K, self field. Critical current of 100 m length tape was mainly resulted from the increase of inhomogeneity in oxide from the increase of inhomogeneity in oxide layer. Engineering critical current (Je=Ic/total tape cross-section area) that is important factor for practical applications and fabrication cost was measured 2.2 kA/cm2.

• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.78-83
• /
• 2004

High-temperature superconduction materials(Bi2223) possess electrical/electronic and magnetic properties. Because high-temperature superconduction materials is a ceramic powder, that cannot be produced singlehandedly. So Ag sheathed Bi-2223 wire was produced by drawing process using powder-in-tube(PIT) method. This superconductor has many difficulties to produce. The main difficulty is that the mechanical properties of the ceramic powder are very different from those of the Ag sheath. And by these properties, Bi2223 high-temperature superconductor, which has a single filament drawing process and multi-filament drawing process, has a defect like sausaging and bursting at a center. This study analyzed multi-filament drawing process by FEM, and a defect generated during multi-filament drawing was studied by FEH. Specially, in order to prevent a bursting at a center, this study presented a method that inserts a pure Ag at a center of multi-filament wire

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.99-105
• /
• 2007

In clinical practice, air bubbles trapped in the pit and fissure may increase early loss of sealing materials for fracture, wear and microleakage. The purpose of this investigation was to examine the bubble behavior of pit and fissure sealant. The 140 replicas made of epoxy resin were used to this experiment. Following conditioning, light-polymerized sealants were applied and then exposed to the light source. After stereoscopic examination of standarized specimen by grinding, bubble behavior was analysed. The results obtained were as follows; 1. Ultraseal $XT^{(R)}$ plus grops irrespective of using time were higher than groups of $Helioseal^{(R)}$ with clinpro tip and metal tip in the frequency of bubble(p<0.05), 2. Ultraseal $XT^{(R)}$ plus old group was more than $Clinpro^{(R)}$, Teethmate $F-l^{(R)}$ and $Helioseal^{(R)}$ with brush tip in the number of bubble under 200 magnified cross section(p<0.05). 3. The widest mean area of bubble was shown in the Teethmate $F-1^{(R)}$. 4. No statistically significant difference of the frequency and the site of bubble between $Clinpro^{(R)}$ and $Helioseal^{(R)}$ groups(p>0.05).

• Korean Journal of Materials Research
• /
• v.10 no.5
• /
• pp.369-374
• /
• 2000

In order to investigate the effects of addition of 1M sulfuric acid to the etching solution or 1M hydrochloric acid on the etching behavior of aluminum foil for electrolytic capacitors, the changes in the density of etch pit, the length and diameter of etch tunnels and the capacitance were analyzed using SEM, TEM, LCR meter etc. Sulfate ion as a corrosion inhibitor was contributed to the increase of the surface area comparing with chloride ion. By adding sul-furic acid the density of etch pit and the length of etched tunnel increased and the diameter of the tunnel decreased, resulting in the increase of capacitance. It was also shown that the capacitance decreased when the current density was below $0.9A/\textrm{cm}^2$, while remarkably increased in the other case.