• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.961-967
• /
• 2007

양계 농장의 자동화 시설 중 닭에 물을 공급하는 자동 급수 장치는 닭 사육을 위한 가장 중요한 시설중의 하나이다. 이 장치 부품 중 급수 니플은 닭이 직접 물을 먹는 장치이며 그 내부에 체크 밸브가 있어 물 공급 시에는 열리고 물을 먹지 않을 경우는 닫히게 된다. 니플의 종류는 피스톤 니플과 볼 니플로 나누워지며 볼 니플은 니플 스틱의 운동이 자유롭게 되어 낙수의 차단이 잘되는 장점이 있으나 복잡한 구조를 갔고 있는 단점이 있다. 이에 반하여 피스톤 니플은 구조가 간단한 장점이 있는 반면에 대부분 상하운동만 가능한 단점이 있다 최근에 이를 보완하기 위하여 피스톤 니플에 밸브 시트면을 구 형태로 제작하여 피스톤 형식이면서 자유로운 운동이 가능 하도록 한 구조(이하 : 구면 피스톤 니플)가 개발 되었다. 본 실험에서는 최근 관심을 갖게된 구면 피스톤 니플에 대한 성능 평가를 수행하였으며 그 결과를 국내외 기존 제품인 볼 니플 및 피스톤 니플과 성능을 실험적으로 비교 분석하였다. 그 결과 구면 피스톤 니플의 성능은 기존 피스톤 니플 보다는 좋은 결과를 얻었으며 볼 니플과는 유사한 성능임을 확인하였다.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.100-106
• /
• 1998

The wide open throttle performance and piston temperatures were measured by the change of fuel : gasoline and liquefied petroleum gas(LPG). Bench test method was developed and experimented to study the effect of temperature on the formation of carbon deposit. The bench test results were confirmed by measuring the piston temperature and observing the deposit production rate at an actual engine running condition. Results show that if the fuel of spark ignition engine is changed from gasoline to LPG, the output power decreases about 10% and the piston temperatures increase about 40~55$^{\circ}C$. In actual engine tests, because of this temperature increase, it was observed that the quantity of carbon deposit in the top ring groove increased in a big degree. Consuquently, it is known that the fing sticking may occur if the gasoline engine was rebuilt to LPG fuelled engine. Therefore, in order to preserve the durability of LPG fuelled engine, it is necessary to lower the piston temperature by hardware modificationor to reduce the carbon deposit by the improvement of engine oil.

• 드라이브 ㆍ 컨트롤
• /
• 제11권3호
• /
• pp.47-54
• /
• 2014

Clutches are an integral part of the automatic transmission for changing gears. Modern automatic transmissions make extensive use of wet multiple-disc clutches employing hydraulic actuation mechanism with electronic control. Although nowadays, highly advanced shifting algorithm implements the superior shift quality and transmission efficiency, its performance should be based on smooth, reliable engagement with a reasonably durable friction material as well as stable clutch piston dynamics. Particularly, clutch filling control is the crucial part of shifting process because only the open-loop control is available due to the lack of measurement. In this paper, the effect of clutch-fill control parameters on clutch piston dynamics is experimentally investigated by using clutch piston test equipment which enables the clutch piston to actuate similar to real shifting conditions. The experimental analysis results can be expected to be utilized for the calibration of proportional solenoid valve as reference current profile data in vehicle test.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.419-424
• /
• 2001

TCV(Temperature control valve by pressure compensation) controls temperature constantly, when it is sending steam or high temperature water to heating device of heat exchanger. For designing TCV, the ratio of piston and hole diameters is one of the important design parameters. Numerical analysis is carried out to elucidate the flow characteristics in the TCV with different port areas of cold and hot waters, using the k-$\epsilon$ turbulence model and Cartesian cut-cell method. Numerical results show that the exit flow rate is mainly affected by pressure distribution in the piston.

• 한국공작기계학회논문집
• /
• 제10권1호
• /
• pp.120-126
• /
• 2001

This study deals with a flow and pressure ripple characteristics for a hydrostatic transmission(HST) consisting of a vari-able axial piston pump connected in an open loop to a fixed displacement axial piston motor. These flow ripples produced by pump and motor in HST interacts with the source impedances of the pump or motor and dynamic characteristics of the connected pipeline, and results in a pressure ripples, Pressure ripples. Pressure ripples in HSP is major source of vibration, which can lead to fatigue failure of components and cause noise. In this paper, the flow ripples generated by a swash plate type axial piston pump or motor in HST are measured by making use of hydraulic pipeline dynamics and the measured pressure data at two points along the pipeline. By using the self-checking functions, the validity of the method us investigated by comparison with the measured and estimated pressure ripples at the halfway section of the pipeline, and good agreement is achieved.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.101-102
• /
• 2006

The purpose of this paper is pulsation-analysis of the swash plate type axial piston pump for excavator and the method of side branch hose application, which is used normally in construction equipments. In this paper, draw the mathematical modeling for pressure pulsation mechanism of the swash plate type axial piston pump for excavator, expression the flow pulsation in the pipelines by transfer matrix method, programmed simulation for pulsation by AMEsim software, and the reliability of that was verified by the comparison with the experimental results.

• 한국해양학회지
• /
• 제30권4호
• /
• pp.365-370
• /
• 1995

해양 퇴적물의 주상시료 채취를 위하여 사용되는 자유낙하 코어러(free-fall corer, FFC)는 조사선의 윈치와 케이블이 필요없고 소형 조사선에서도 사용이 가능한 장비이다. 심해저 광물지원 탐사시 탐사효율을 높이고자 새로 개발된 피스톤형 자유낙 하 코어러는 KORDI-FFC라 명명되었다. 이 장비는 이 장비는 피스톤 코어러(piston corer)와 자유낙하 코어러의 장점이 조합된 채취기로, 열린 배럴의 중력 코어러(open barrel gravity corer)를 변조하여 만든 기존의 자유낙하 코어러의 단점이 보강되었고 양질의 시료가 채취되도록 설계되었다. 본 장비를 진해만과 제주부근 해역에서 4회에 걸쳐 투하한 결과 교란이 적은 표층 퇴적물 시료가 성공적으로 채취되었다. 시험 결과 본 장비는 심해저 및 천해저에서 원치와 케이클, 갑판의 A-frame, 또는 해상 크레인 없는 소형 선박에서도 사용이 가능하고, 또한 최단 시간에 퇴적물 시료를 채취하며, 본 장비의 사용과 동시에 선상에서 자유롭게 다른 작업을 할 수 있고, 제작 및 소모 비용이 저렴하며, 표층퇴적물의 교란이 적은 양질의 시료를 채취할 수 있는 장점이 있 다.

• 드라이브 ㆍ 컨트롤
• /
• 제16권3호
• /
• pp.23-32
• /
• 2019

This study proposed a fault tolerant control algorithm for electro-hydraulic brake systems where permanent magnet synchronous motor (PMSM) drive is adopted to boost the braking pressure. To cope with motor position sensor faults in the PMSM drive, a braking pressure controller based on an open-loop speed control method for the PMSM was proposed. The magnitude of the current vector was determined from the target braking pressure, and motor rotational speed was derived from the pressure control error to build up the braking pressure. The position offset of the pump piston resulting from a leak in the hydraulic system is also compensated for using the open-loop speed control by moving the piston backward until it is blocked at the end of stroke position. The performance and stability of the proposed controller were experimentally verified. According to the results, the control algorithm can be utilized as an effective means of degraded control for electro-hydraulic brake systems in the case that a motor position sensor fault occurs.

• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.33-38
• /
• 2002

This paper deals with pressure ripple attenuation far separated-type Hydrostatic Transmission (HST) consisting ova variable axial piston pump connected in an open loop to a fried displacement axial piston motor. Pressure ripples in HST is major source of vibration which can lead to fatigue failure of components and cause noise. In order to reduce the pressure ripple, an annular tube tripe hydraulic filter is proposed to attenuate pressure ripples with the high frequencies components to achieve better noise reduction in HST. The basic principle of a hydraulic filter is allied to propagation of pressure wave, reflection, absorption in cross section of discontinuity and resonance in the hydraulic pipeline. It is experimentally shown that the hydraulic filter attenuates about 30∼40dB of pressure ripple with high frequencies. These results will assist in modeling and design of noise reduction in hydraulic control systems, and provide a means of designing a quieter HST.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.117-123
• /
• 2003

This paper deals with pressure ripple and noise reduction characteristics for a hydrostatic transmission(HST) consisting of a variable axial piston pump connected in an open loop to a fixed displacement axial piston motor. Pressure ripples in HST is major source of vibration, which can lead to fatigue failure of components and cause noise. In order to reduce the pressure ripple, an annular tube type hydraulic filter proposes to absorb pressure ripples with the high frequencies components to achieve better noise attenuation in HST. The basic principle tube is applied to propagation of pressure wave, reflection, absorption in cross section of discontinuity and resonance in the hydraulic pipeline. It is experimently confirmed that a hydraulic filter is absorbed to be about 30∼40dB of pressure ripple with high frequencies. These results will assist in modeling and design of noise reduction in hydraulic control systems, and here, should provide a means of designing a quieter HST.