• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.510-514
• /
• 2002

The 3-dimensional measuring machine by using an ultrasonic sensor is used one of the NDE(Non Destructive Examination). It is applied to the inspection of pipelines, boreholes, pressure vessel and tank, and so on. In particular when a harsh environment prohibits the use of moving mechanical parts. The 3-dimensional measuring machine by using an ultrasonic sensor, which measure 1-dimensional information and 2-dimensional information simultaneously from a target of inspection, and then reembody 3-dimensional information. So we can find the situation in progress and predict remaining life and corrosion without destructive examination. It's a point of excellence that the 3-dimensional measuring machine is portable.

• 한국화재소방학회논문지
• /
• 제28권4호
• /
• pp.8-13
• /
• 2014

본 연구에서는 수소 네트워크 설비의 안전성 확보를 위한 기초연구로 파이프라인 내부에서의 수소/공기혼합기의 착화온도를 조사하였다. 착화원으로는 순간적으로 고온이 된 후 일정한 온도를 유지하는 열선을 사용하였다. 수소농도와 열선의 온도를 변화시키며 실험한 결과, 수소농도의 감소에 따라 최저착화온도도 감소하는 경향이 확인되었다. 착화를 위한 열선의 최저온도는 수소 농도 10 vol.%에서 가장 낮음이 확인되었다. 이러한 경향은 열선주변의 부력에 의한 영향이라 생각된다. 또한, 혼합기의 습도는 착화온도, 화염온도에 큰 영향을 미치는 않는 것이 확인되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.618-621
• /
• 2005

In this study, the phenomena of hydrate formation and inhibition were investigated according to varying the concentrations using methanol and ethylene glycol as chemical additives. The results reveal that the used additives display better inhibition effects compared to pure water by decreasing the formation temperature and the inhibition performance of methanol is superior to that of ethylene glycol. As a conclusion, the plugging phenomena of flowline in natural gas product ion. subsea and frozen field pipelines can be predicted by examining the hydrate formation and inhibition conditions. Specifically, the results of this study can be applied to the selection of the prevention criteria and method of hydrate formation.

• 상하수도학회지
• /
• 제19권5호
• /
• pp.613-618
• /
• 2005

In analysis of pipelines or pipe network we calculated the friction loss using Hazen-Williams or Manning formula approximately, or found one by friction coefficient from Moody diagram graphically. The friction coefficient is determined as a function of relative roughness and Reynolds number. But the calculated friction coefficient by Hazen-Williams or Manning formula considered roughness of pipe or velocity of flow. The friction coefficient in Darcy-Weisbach equation was obtained from the Moody diagram. This method is manual and is not exact from reading. This paper is presented numerical solution of Colebrook-White formula including variables of relative roughness and Reynolds number. The suggested subroutine program by an efficient linear iteration scheme can be applied to any pipe network system.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1395-1399
• /
• 2006

The current paper focuses the analysis of leakage detection in water pipeline systems by means of the transient analysis. In order to obtain pressure variation for evaluation the existing methodology, an extensive experimental process has been carried out in a single pipeline system. Several experimental tests were performed with and without a leakage in the system. Using the unsteady friction and improved unsteady friction factors, reasonable match between the computed and measured pressure were presented on the condition of the flow situations. The transient method attempts to estimate the leakage in water pipelines using observed pressure data collected during transient events on the system.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.269-278
• /
• 1998

The Planning characteristics of the canals linking river basins and estuary reservoirs have been reviewed in relation to the trend widening the areas of water resources planning. It has been also tried to justify the characteristics of the link canals in the history of irrigation development. It was concluded that the link canals were resulted from the most recent technology as far as irrigation systems were concerned, why these were long- and large-scale multipurpose canals ； the hydraulic heads of the link canals could be controlled easily ； and which consisted of open channels, pipelines and control reservoirs. The types and general characteristics of the canals have been reviewed, and the fundamental concept and characteristics in the planning of the canals have been described.

• 동력기계공학회지
• /
• 제15권3호
• /
• pp.18-24
• /
• 2011

In this study, the reflection of the L(0,2), axially symmetric guided elastic wave from defects in pipes above ground is examined using finite element method. Phase and group velocity dispersion curves for the pipe were presented for the selection of the excitation mode. Some simple signal processing was applied to determine the amplitude of each of the reflected waves and to calculate the reflection coefficient. The results show the reflection coefficient of this mode is very close to a linear function of the circumferential extent of the defect. The motivation for the work was the development of a technique for inspecting chemical plant pipelines, but the study addresses the nature of the reflection function and its general applicability.

• 한국해양공학회지
• /
• 제34권3호
• /
• pp.194-201
• /
• 2020

In this study, an optical-fiber sensor was used to measure loads that could act in an environment similar to the loading conditions that exist in an actual pipe. The structure and the installation method of the optical-fiber strain sensor were applied considering the actual large pipe and the buried pipe environment. Load tests were performed using a displacement sensor and sandbags to determine the deflection of the pipe according to the external load, and the linear measurement results were verified. Considering the conditions that could exist in the actual pipe, the test method was presented, and the strain of the buried pipe generated at this time was measured.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.1929-1932
• /
• 2008

In case of a line-to-ground fault at transmission lines, a portion of fault current will flow into the earth through the footings of the faulted tower causing electrical potential rise nearby the faulted tower footings. In this situation, any buried pipelines or structures nearby the faulted tower can be exposed to the electrical stress by earth potential rise. Although many research works has been conducted on this phenomena, there has been no clear answer of the required separation distance between tower footings and neary buried pipeline because of its dependancy on the soil electrical charactersics of the concerned area and the faulted system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2045_2046
• /
• 2009

광역상수도관에 대하여 외면부식직접평가(ECDA)를 실시하였다. ECDA평가는 과거 방식이력 등에 대한 사전검사, CIPS-DCVG-비저항 측정의 3단계 간접검사를 통해서 배관의 부식가능성이 큰 지점을 검출하여 위험성 우선순위를 판정하고 최종적으로 굴착을 통한 직접 검사 우선순위를 선정하였다. 직접 검사후 사후단계로 수집한 모든 데이터를 종합적으로 분석하여 검사구간의 건전성을 종합 평가를 하였다. 이러한 검사기법을 도입함으로써 배관의 부식위험지역을 파악하고 적절한 조치를 취할 수 있는 체계적인 근거를 마련한 것으로 판단하였다.