• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.214-220
• /
• 2003

Pipe jacking is a name for a method to excavate a tunnel by pushing pipe into the ground from an especial pit. Size of tunnels in this method is different from under 900mm (microtunneling) to more than 3,000mm. Method of excavation is also different from hand digging to use of any kind of tunnel boring machines such as slurry and earth pressure balance (EPB) machines. Slurry pipe jacking was firmly established as a special method for the nondisruptive construction of the underground tunnels in urban area. During the pipe jacking and microtunneling process, the jacking load is an important parameter, controlling the pipe wall thickness, need to and location of intermediate jacking station, selection of jacking frame and lubrication requirements. The main component of the jacking load is due to frictional resistance. In this paper the skin friction between pipe surface and surrounding condition also lubricant quality based on a few fundamental tests, were considered. During this study unconfined compressive strength test, dynamic friction measurement test and direct shear box test were raised for one of the largest diameter slurry pipe jacking project in Fujisawa city in Japan. It could be concluded that in slurry pipe jacking, prediction of frictional forces are mainly dependent on successful lubrication, its quality and lubricant strength parameters. Conclusions from this study can be used for the same experiences.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1290-1297
• /
• 2008

A pipe jacking method complements the excavation method and it is a non-excavation method which is thrust in the earth. On that score, using the pipe jacking method is increased because of constructability and economical efficiency in a medium or small-sized pipeline construction. However, a pipe jacking method still has several problems that the base ground is disturbed and loosen. Especially, where some sites have boulders, gravels and foreign bodies, the foundation is brought about deformation, settlement and leakage of water. Thus, the end of the construction the ground should be reinforced by grouting and it occur with additional expenses. Therefore, a steel pipe jacking method with grouting, Grout In Pipe, is devised newly to complement the existing method. In this study, it describes a new method and verifies efficiency, an application and practicality of the method through a experimental construction.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권1호통권53호
• /
• pp.152-160
• /
• 2009

강관추진공법은 비굴착공법으로써 중소규모 관로공사에 높은 시공성과 경제성을 가지고 있기 때문에 그 사용이 빈번해지고 있다. 그러나 강관추진공법의 추진과정은 원지반이 교란되고 느슨해지는 문제를 야기하고 있다. 이는 지표침하, 지반강도 저하 및 누수 등의 문제와 연결된다. 이에 본 연구는 강관추진과 동시에 그라우팅을 시행하는 그라우팅을 병행한 강관추진공법의 현장 적용성을 알아보고자 한다. 그 방법으로 그라우팅을 병행한 강관추진공법과 기존강관추진공법을 동일 지반에 시공하였다. 지표침하 계측, 현장밀도, GPR 물리탐사 그리고 대형전단실험의 결과는 그라우팅을 병행한 강관추진공법의 현장 적용성이 있음을 입증하였다.

• 한국터널지하공간학회 논문집
• /
• 제17권5호
• /
• pp.513-522
• /
• 2015

본 연구의 목적은 비개착공으로 시공되고 있는 지하차도를 대상으로 지하차도 상부 및 측벽에 작용하는 토압을 계측하여 압입된 강관에 의한 지보효과 확인을 목적으로 하고 있다. 근래의 비개착공법은 파이프루프를 형성하기 위한 강관을 압입한 후 강관과 강관사이를 철근으로 보강하고 모르타르를 타설하는 방식으로 침하에 대한 안정성을 보다 확보하기 위한 노력을 기울이고 있다. 이에 최근 적용되고 있는 UPRS(Upgraded Pipe Roof Structure)공법과 프론트잭킹(Front-Jacking)을 중심으로 강관 압입 후 강관에 의한 토압감소효과를 확인하기 위하여 지하차도 주변의 토압을 계측하였다. 그 결과 UPRS공법의 경우 지하차도에 토압이 상당부분 감소하여 강관보강에 의한 지보강성 효과가 발휘되는 것으로 분석되었다. 프론트잭킹 공법의 경우 지하차도 구조물이 외부에서 제작되어 압입되는 형식으로 강관을 보강시킬 필요가 없기 때문에 강관보강에 의한 토압감소효과는 예측한대로 발휘되지 않는 것으로 분석되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.546-551
• /
• 2001

We analysed the affection to subgrade that railway underground crossing construction make with studying displacement of subgrade of each construction methods and processing of Front jacking method and Pipe roof method with already-measured data(during the construction) and additionally-measured field test data in railway underground crossing construction. We measured vertical and horizontal displacement at two construction places of front jacking method and pipe roof method each, and we analysed the results of the measurement at each stage of construction to applied to the excution of construction.

• 상하수도학회지
• /
• 제25권6호
• /
• pp.869-875
• /
• 2011

Ministry of Environment has been promoting BTL business of the sewer rehabilitation which continues from 2005 up to now. Sewer rehabilitation is classified into three parts : wastewater pipe rehabilitation, rainwater pipe rehabilitation and drainage equipment rehabilitation. Drainage equipment rehabilitation is that drainage pipe connects wastewater pipe directly without water-purifier. In the drainage equipment construction, it is inevitable to have the damage of ground structures(wall, gate and U drain, etc) when an open excavation method is used. Therefore it is necessary to develop non-excavation method to connect drainage pipe and wastewater pipe like jacking method to avoid the damage of ground structure. This paper has conducted an analysis of the non-excavation method using a boring machine attached to backhoe, which is issued the verification certificate of environmental technology according to the Development of and Support for Environmental Technology Act, article.7. The index set in this analysis was sectionalized to the condition of construction, the grade of drainage pipe, the size of excavated hole, the amount of waste cement concrete and asphalt concrete and the benefit effect compared to open excavation method.

• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.174-179
• /
• 2006

Recently, the crossing tunnel has been constructed frequently to connect the separated area by highway and railroad. The construction of crossing tunnel must be progressed while maintaining the existing traffic of the highway as well as railroad. There are many cross funnelling methods such as NTR, TRCM, Messer Shield, Front Jacking, and Pipe Roof Method. The advantages of adopting RPS(Roof Panel Shield) method in crossing tunnel construction with comparing other existing cross funnelling methods are needed a little volume of concrete and easy to change the direction of cutting shoe during the construction of pipe roof, The 3-dimensional numerical analysis of RPS to consider the arching effect was performed for the application in the crossing tunnel under railroad. The earth pressure distribution and settlement were predicted when the RPS method was applied during the excavation for crossing railroad tunnel construction.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.454-461
• /
• 2005

There are many cross tunnelling methods such as NTR, TRCM, Messer Shield, Front Jacking, and Pipe Roof Method. The advantages of adopting RPS(Roof Panel Shield) method in crossing tunnel construction with comparing other existing cross tunnelling method are needed a little space and easy to change the direction of cutting shoe during the construction of pipe roof. The 3-dimensional numerical analysis of RPS was performed for the application in the crossing tunnel under railroad. The earth pressure distribution and settlement were predicted when the RPS method was applied during the excavation for crossing railroad tunnel construction.

• 한국지반환경공학회 논문집
• /
• 제16권11호
• /
• pp.29-37
• /
• 2015

최근 급격한 도시화로 인한 신도시, 택지개발지구 등의 증가로 기존 구조물 하부를 통과하는 비개착 강관압입공법의 적용이 증가하는 추세이다. 비개착공법은 시공 중 기존구조물의 정상적인 운영 안정성이 확보되어야 하므로 강관압입에 의한 지표침하의 정밀한 예측이 필수적으로 필요한 공법이다. 강관압입 시 침하를 발생시키는 원인은 강관 선단과 강관과의 직경차에 의한 공극, 원활한 강관압입을 위한 과굴착, 강관과 지반과의 마찰에 의한 공극 발생 등이 있으며, 이는 Shield TBM 시공 시 발생하는 침하 원인과 유사하다. 본 연구에서는 Shield TBM의 침하 예측방법인 Gap Parameter Method와 Volume Loss Method를 이용하여 강관압입 시 침하를 예측하였으며, 현장시험을 통하여 예측방법에 대한 비교 분석을 수행하였다. 그 결과 Volume Loss 예측방법이 현장시험과 가장 유사한 결과로 나타났으나, 추후 예측방법의 Factor 결정 및 비개착공법 전체 침하예측을 위한 적용성 등 추가적인 연구가 필요할 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.591-600
• /
• 2005

There are many cross tunnelling methods such as NTR, TRCM, Messer Shield, Front Jacking, and Pipe Roof Method. The advantages of adopting RPS(roof panel shield) method in crossing tunnel construction with comparing other existing cross tunnelling method are needed a little space and easy to change the direction of cutting shoe during the construction of pipe roof. The numerical analysis of RPS was performed for the application in the crossing tunnel under railroad. The earth pressure distribution and settlement were predicted when the RPS method was applied during the excavation for crossing railroad tunnel construction.