• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.80-85
• /
• 2009

Mathematical modeling and performance simulation results were shown for the solar thermal storage system which used heat pipe. The thermal storage system was composed of thermal storage tank and charging/discharging heat exchanger with one by the heat pipes. Heat pipe heat exchanger was attached to system, and could carry out charging and discharging to thermal storage tank at the same time. Height of the thermal storage tank was 600 mm, and that of the charging/discharging heat exchanger was 400 mm. Length of the heat pipe was the same as the total height of thermal storage system, and outer and inner diameter were 25.4 mm(O.D.) and 21.4 mm(I.D.) respectively. Diameter of the circular was 43 mm(O.D.), and fin geometries were considered as the design parameters. High temperature phase change material(PCM), $KNO_3$ and low temperature PCM, $LINO_3$ were charged to storage tank to adjust working temperature. Total size of thermal storage system able to get heat capacity more than 500 kW was calculated and the results were shown in this study. Number of heat pipe was required more than maximum 500, and total length of thermal storage system was calculated to the more than maximum 3 m at various condition.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권3호
• /
• pp.206-210
• /
• 2015

NOVEC 가스 소화 설비는 소화 약제 보관용기에 보관되어 있는 NOVEC 가스를 보호구역에 정해진 시간 안에 방출하는 것이 가장 중요하며, 이를 위해서는 적절한 배관장치의 배치와 크기를 결정하는 것이 중요한 사항이다. 본 연구에서는 배관망해석 기법을 활용하여 NOVEC 가스 소화 설비의 설계방법론을 개발하였다. 설계방법론에 기초하여 각종 설계계수들을 결정 하였다. 개발된 방법론에 의해 소화 약제 방출시간에 대하여 계산한 결과 총 6.498초로 계산되어 제한시간인 10초 이내로 만족하는 것을 알 수 있었으며, 그 때의 압력손실은 21.09bar 이었다.

• 한국전산유체공학회지
• /
• 제15권3호
• /
• pp.66-72
• /
• 2010

The north and south panel of a geostationary satellite are used for radiator panels to reject internal heat and utilize several heat pipe networks to control the temperatures of units and the main structures of satellite within proper ranges. The design of these panels is very important and essential at the conceptual design and preliminary satellite design stage, so several thousands of nodes or more are utilized in order to perform detailed thermal analysis of panel. Generating a large number of panel nodes takes time and is tedious work because the nodes can be easily changed and updated by locations of units and heat pipes. Also the detailed panel model can not be integrated into spacecraft thermal model due to its node size and limitation of commercial satellite thermal analysis program. Thus development of a program was required to generate a detailed panel model, to perform thermal analysis and to make a reduced panel model for the integration to the satellite thermal model. This paper describes the development and the verification of the panel thermal analysis program with its main modules and functions.

• 한국태양에너지학회 논문집
• /
• 제36권3호
• /
• pp.25-31
• /
• 2016

Gaskets are usually used for the sealing of flange joints. The joint is usually composed of two flanges, a ring gasket and clamping bolts. The metal ring gasket is suitable for pipe flanges, pumps and valve joints in high temperature and high pressure environments. A very high surface stress is developed between a ring type joint gasket and the flange groove when the ring type joint is bolted up in a flange. The dimensions of flanges and ring joint gaskets for the pipe sizes that are in common use are specified in the ANSI codes. However, sometimes it is necessary to make a new design for the flange joint which is not specified in the codes, as the equipment is getting larger and larger in size. This paper presents the contact behavior of Class 600 ring joint gaskets with oval and octagonal cross sections. Five different sizes of gaskets are employed in the analysis, and one of them is newly designed on the basis of analysis results obtained from existing models. Three load steps are used to find the stress, stain and contact pressure etc., and to compare the contact characteristics among the models due to the bolt clamping force and the working surface pressure. ANSYS Workbench version15 is used to conduct the finite element analysis.

• 한국자동차공학회논문집
• /
• 제25권1호
• /
• pp.74-81
• /
• 2017

The door impact beam of the side-impacted vehicle plays a key role in securing occupant safety by preventing intrusion from the impacting vehicle. Despite the low production cost, the press door impact beam has been adopted sparingly because of the strength inferiority. In this study, the design technologies of the press beam aimed at improving bending strength were investigated. First, the effect of the section shape and size was examined. Next, thickness and material strength were increased. Also, the TRB beam application was simulated by varying combined thickness. Some TRB beams with reduced weight exhibited bending strength over the strength of the pipe beam. Then, the beam with a closed center section also showed remarkably enhanced maximum bending strength.

• 한국유체기계학회 논문집
• /
• 제14권5호
• /
• pp.39-47
• /
• 2011

Flow control range of valve, which is installed on pipeline, varies according to valve type, pipe diameter, pipe length, roughness, and elevation difference of both ends of pipeline. A lot of computation efforts and knowledge are needed to estimate flow control range of valve, considering above many parameters. The table of flow control range of each valve type is presented for convenience of pipeline design engineers who must make decision of valve size and type in this study. Also the reason that butterfly valve is recommended for flow control, and gate valve is forbidden is presented via quantification and figures in this study.

• 설비공학논문집
• /
• 제26권1호
• /
• pp.38-41
• /
• 2014

Fixture units and the diversity curve are used, in order to determine the required size of water supply pipe. However, the values of the National Plumbing Code, International Plumbing Code and National Standard Plumbing Code of America are not the same. The objective of this study is to comparatively analyze the fixture units and the peak flows of a 10th story office building, at any instant of time, according to the three codes.

• 설비공학논문집
• /
• 제13권5호
• /
• pp.388-397
• /
• 2001

This paper addresses characteristics of compressible flow dynamics inside a pipe with an accumulator and an inlet orifice. It also presents a simple but stable numerical method associated with the accumulator-orifice calculation. In particular, a focus is given to developing a method of finding an optimum design of the accumulator-orifice system (i.e., the accumulator size and the throttle resistance) that gives the most effective dissipation of the water-hammering problem. It is found that there exists indeed an optimum set of parameter values for the most effective dissipation of the wave energy.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1107-1116
• /
• 2004

In this paper, the effects of diverse parameters on the operation of loop heat pipe (LHP), such as particle diameter of sintered porous wick, wick porosity, vapor line diameter, thickness of wick and heating capacity were investigated by a theoretical analysis. A LHP has a wick only in its evaporator for the circulation of working fluid, and utilizes a porous wick structure of which pore size is very small to obtain a large capillary force. The working fluid is water and the material of sintered porous wick is copper. For these different parameters, capillary pressure, pressure drop in wick, pressure drops and temperature distribution were analyzed by a theoretical design method of LHP.

• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.9-14
• /
• 2019

최근 컨테이너 선종은 물류비 감소를 위한 대형화 및 그에 따른 선박운용 효율의 향상을 위하여 수명 증가 및 경량화를 위한 다양한 기술의 적용이 필수적으로 요구되고 있다. 선박의 크기 증가에 따른 엔진의 효율 저하와 이와 관계된 부수적인 설비들은 대형화에 따른 효과성 검증 없이 그 크기와 형태를 증가시켜 대형 선박에 적용되고 있다. 본 논문에서는 기존의 대형 컨테이너 선박에 적용되는 배기가스 파이프를 초대형 선박에 적용하기 위하여 유동 해석을 실시하고 그 결과를 바탕으로 초대형 선박에 적용 가능한 구체적인 배기가스 파이프의 구조 형태를 연구하였다. 이를 위하여 기존의 가스 파이프에 초대형 선박의 엔진운용 조건을 적용하여 모델링하고, 모델링에 필요한 주요 요소를 결정하고 이를 CFD에 적용하여 시뮬레이션을 통해 연구하였다. 그 결과를 바탕으로 유량의 흐름, 불필요한 구간 등을 효과적으로 개선하여 설계된 가스파이프는 초대형 컨테이너 선박의 운용효율 증가를 기여할 수 있다.