• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.662-665
• /
• 2011

Pintle technology, which is one of the thrust control method for solid rocket motor, can control the thrust by the control of nozzle throat area through the pintle moving. For studying the unsteady flow characteristics of pintle nozzle by needle type pintle moving, cold flow test and numerical analysis were performed. The pressure distribution on the pintle tip was varied for pintle moving and stopping and thrust was varied by this effects.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.6
• /
• pp.126-142
• /
• 2020

This study aims to provide basic design data for a pintle injector and its combustion device through case study on the research and development of combustion devices to which a liquid-liquid pintle injector was applied. From data analysis, it was possible to provide the initial dimension of the combustion chamber and pintle injector based on the engine thrust, and the geometric characteristics of the high-efficiency injector. In addition, the pintle tip heat damage prevention mechanism and materials, face-shutoff pintle injector implementation method, and central propellant selection criteria were summarized. Theses results will be used as basic data for the design criteria of an initial pintle injector combustion device.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.4
• /
• pp.107-118
• /
• 2017

As the interest in lunar exploration increases, a throttleable engine is regarded as a important technology. Variable area injectors have been identified to be the most reliable throttling method. Pintle injector is a representative injector of the variable method. It has a simple design and inherent combustion stability. Therefore, it is necessary to research the pintle injector. The present study investigates the concept of the injector, the design factors, and the latest development trends for pintle injector design.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.5
• /
• pp.19-28
• /
• 2014

Firing test of solid rocket motor with pintle-technology carried out and the measured pressure-time curve was compared with the values predicted by the internal ballistic and performance analysis. Without baffle, the measured combustion chamber pressure was similar with the predicted pressure at the beginning of combustion, but gradual increase in pressure, which was unexpected with the end-burning grain of which burning area is constant, was observed. A baffle was inserted to make uniform flow over the pintle. Unlike the thruster without baffle, the measured combustion chamber pressure was 1.4 times higher than the predicted value. Through the CFD simulation, 10% of total pressure loss of the flow was observed from combustion chamber to nozzle throat when the baffle was inserted. The measured pressure with baffle was predicted well by considering the total pressure loss in the internal ballistic modelling and performance analysis.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.2
• /
• pp.60-71
• /
• 2022

The reusable, low-cost launch vehicle development trend in the recent launch vehicle market is being subdivided into several ways, and the throttleable engine is one of them. Plus, several nations have selected methane as a next-generation propellant due to its cleanness. In this research, a throttleable pintle injector using gas methane and liquid oxygen as propellants was developed, followed by its spray and combustion characteristics analysis, including high pressure cold and hot tests. The designed throttleable pintle injector has a double sleeve structure, and its tightness and functionality are confirmed through repetitive atmospheric, high-pressure cold tests, and hot tests. Though some design errors were discovered and a low throttling level was unable to be achieved in the combustion test.

• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.68-70
• /
• 2016

최근 저비용 및 재사용 발사체 개발 연구에 관한 관심이 증가하고 있는 추세인데, 이로 인해 노즐 내부에 핀틀 개념을 적용하여 발사체의 성능을 높이거나 스로틀링을 활용한 재사용 연구가 중요해지고 있다. 이 노즐 내부에 탑재된 핀틀 형상은 노즐 성능을 결정짓는데 핵심적인 역할을 하게 된다. 따라서 본 논문에서는 핀틀 형상에 따른 압력특성과 재순환 영역의 경향성을 확인하여 추후 저비용, 재사용 발사체 개발 연구의 기초자료로 활용하고자 한다. 해석 결과 핀틀 크기보다 핀틀 각도가 성능 변화에 더 민감한 변수로 판단되었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.2
• /
• pp.152-159
• /
• 2018

A numerical simulation was conducted to establish the analysis methods of the unsteady conjugated heat transfer with a hot gas valve. Two methods are proposed to reduce the computational cost and analysis time of the unsteady conjugate heat transfer; namely, the multi-section analysis method and the one-way analysis method. The multi-section analysis method exhibits relatively high reliability. In the one-way analysis method, the unsteady conjugate heat transfer from the fluid domain to the solid domain was simulated from the analysis results of the steady-state flowfield. The incipient accuracy of the analysis results obtained by the one-way analysis method was slightly lower than that of the results obtained by the multi-section analysis method. However, the discrepancy became smaller with time, as the analysis progressed.

• Journal of Mechanical Science and Technology
• /
• v.14 no.12
• /
• pp.1376-1385
• /
• 2000

This study investigates spray characteristics before and after wall impingingment of gasoline spray in suction air flow. For this study, a rectangular model intake port was made of acrylic glass, and suction air was generated by using the forced air blower contrariwise. The injector for this study was a pintle-type port gasoline injector in which an air-assist adaptor is installed to supply assisted air. A PDPA system was employed to simultaneously measure the size and velocity of droplets near the wall. Measured droplets are divided into "pre-impinging droplets"with positive normal velocity and "post-impinging droplets"were negative normal velocity for the suction flow. The velocities, size distributions and Sauter mean diameter(SMD) of pre-and post-impinging droplets for varions injection angles and air-assists are comparatively analyzed.

• Journal of Ship and Ocean Technology
• /
• v.12 no.4
• /
• pp.20-31
• /
• 2008

Development of rudder gap flow blocking device for lift augmentation and cavitation suppression is presented. In order to verify the performance of this device, cavitation visualization and surface pressure measurements were carried out in a cavitation tunnel. Numerical simulations were conducted using a computational fluid dynamics code for more rigorous verification. The new rudder system is equipped with cam devices, which effectively close the gap between the horn/pintle and movable wing parts. The experimental and computational results show that the proposed rudder system is superior to the conventional rudder systems in terms of the lift augmentation and cavitation suppression.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.1
• /
• pp.57-64
• /
• 2003

The characteristics of fuel spray have an important effect on engine performance such as power, specific fuel consumption and emission because fuel spray controls the mixing and combustion process in an engine. Therefore, if the characteristics of fuel spray can be measured, they can be effectively used for improving engine performance. The major factors controlling fuel spray are injection pressure, ambient pressure and engine speed. In this study, the experiment is performed in a high temperature and high pressure chamber. In experiments, spray tip penetration, spray angle and spray tip velocity are measured at various injection pressure (10 and 14 MPa), ambient pressure(3,4 and 5 MPa), fuel pump speed(500, 700 and 900 rpm). Experimental results are useful for deriving an experimental spray equation and design an optimal engine. The results showed that injection pressure, ambient pressure and fuel pump speed are important factors influencing on the characteristics of spray. 1) Injection pressure influences on the characteristics of spray. That is, as injection pressure is increased, spray angle is decreased but spray penetration and spray tip velocity is increased. 2) Spray angle and spray penetration are increased as fuel pump speed is increased.