• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.25-36
• /
• 2021

This paper presents a topology based on packet tracer and a five-step scenario model to make it easier for students to understand the network on which VLANs are applied. Virtual LAN (VLAN), developed as an alternative solution to the Routers that distribute broadcast traffic, is a virtual local area network that logically configured regardless of the physical network. The VLAN prevents the network performance degradation resulting from the broadcast traffic by dividing the broadcast domain so that the bandwidth can be used more efficiently. In addition, it enhances the security because on communication between the devices belonging to different VLANs is impossible. The five-step scenarios in this paper presented an efficient implementation case for students to understand and validate the various functions of VLANs through ping/telnet/tracert test and simulation, after setting up each step of programming switches and routers in the virtual network.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.23-29
• /
• 2009

This paper presents the development of embedded network educational system. This is an educational equipment which enables user to have training over Network Configuration and Embedded network programming practice on Internet environment. The network education system is developed on embedded environment. based on using ethernet interface. On the development environment. PAX255 VLSI chip is used for the processor, the ADSv1.2 for debugging, uC/OS276 for RTOS. The system software was developed using C language. The ping program provided an educational environment for the student to compile and load it to run after doing practice of demonstration behavior. Afterwards programming procedure starts the step-by-step training just like the demonstration function. In other words, programming method how to design the procedure of ARP operation and ICMP operation is explained.

• Journal of Microbiology
• /
• v.44 no.6
• /
• pp.685-688
• /
• 2006

The aim of this study was to characterize the molecular features of serogroup C Neisseria meningitidis strains circulating in Beijing, China. Twenty out of 23 strains belonged to ST 4821. The causative serosubtype for meningococcal meningitis was P1.12-1,16-8. All of the strains expressed class 3 PorB protein. Among the five pulsed-field gel electrophoresis patterns observed, pattern III predominated.

• Communications for Statistical Applications and Methods
• /
• v.15 no.2
• /
• pp.147-159
• /
• 2008

We consider using ranked set sampling methods to draw inference about the three well-known measures of overlap, namely Matusita's measure $\rho$, Morisita's measure $\lambda$ and Weitzman's measure $\Delta$. Two exponential populations with different means are considered. Due to the difficulties of calculating the precision or the bias of the resulting estimators of overlap measures, because there are no closed-form exact formulas for their variances and their exact sampling distributions, Monte Carlo evaluations are used. Confidence intervals for those measures are also constructed via the bootstrap method and Taylor series approximation.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.269-276
• /
• 1998

This paper proposes an opportunistic age replacement policy. The system has two types of failures. Type I failures (minor failures) are removed by minimal repairs, whereas type II failures are removed by replacements. Type I and type II failures are age-dependent. A system is replaced at type II failure (catastrophic failure) or at the opportunity after age T, whichever occurs first. The cost of the minimal repair of the system at age z depends on the random part C(z) and the deterministic part c(z). The opportunity arises according to a Poisson process, independent of failures of the component. The expected cost rate is obtained. The optimal $T^{\ast}$ which would minimize the cost rate is discussed. Various special cases are considered. Finally, a numerical example is given.

• Research in Mathematical Education
• /
• v.19 no.4
• /
• pp.267-278
• /
• 2015

The study is about the influence of literal, symbolic and graphics languages on mathematics reading. The results show that the scores of symbolic language volume are significantly lower than that of literal language volume. The abstractness of the mathematical symbols will not have a significant impact on the students with excellent mathematical academic, but as for the medium and poor students, abstract mathematics symbols will cause their cognitive impairment. Due to picture-superiority-effect, the test scores of the graphics language volume are significantly higher than that of the symbolic language volume. Graphics language will have a significant impact on the excellent and medium students, but has no impact on the poor students.

• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.644-651
• /
• 2015

This paper introduces a novel digital one cycle control (DOCC) boost power factor correction (PFC) converter. The proposed PFC converter realizes the FPGA-based DOCC control approach for single-phase PFC rectifiers without input voltage sensing or a complicated two-loop compensation design. It can also achieve a high power factor and the operation of low harmonic input current ingredients over universal loads in continuous conduction mode. The trailing triangle modulation adopted in this approach makes the acquisition of the average input current an easy process. The controller implementation is based on a boost topology power circuit with low speed, low-resolution A/D converters, and economical FPGA development board. Experimental results demonstrate that the proposed PFC rectifier can obtain a PF value of up to 0.999 and a minimum THD of at least 1.9% using a 120W prototype.

• Structural Engineering and Mechanics
• /
• v.48 no.1
• /
• pp.103-124
• /
• 2013

This paper studies the static and dynamic characteristics of composite plates subjected to an arbitrary periodic load in hygrothermal environments. The material properties of composite plates are depended on the temperature and moisture. The governing equations of motion of Mathieu-type are established by using the Galerkin method with reduced eigenfunction transforms. A periodic load is taken to be a combination of axial pulsating load and bending stress in the example problem. The regions of dynamic instability of laminated composite plates are determined by solving the eigenvalue problems based on Bolotin's method. The effects of temperature rise and moisture concentration on the dynamic instability of laminated composite plates are investigated and discussed. The influences of various parameters on the instability region and dynamic instability index are also investigated. The numerical results reveal that the influences of hygrothermal effect on the dynamic instability of laminated plates are significant.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.377-380
• /
• 2006

The semiconductor PbS nanobelts (width 50-120 nm and length over 3 $\mu$m) were self-assembled in a simple reverse micelle solvent system containig the surfactant of polyoxyethylene (9) dodecy ether $(C_{12}E_9)$. The nanobelts synthesized were found to possess cube galena poly-crystal structure with high purity when analyzed by ED and X-ray diffraction. Significant “blue shift” from bulk material was observed on the PbS nanobelts using photoluminescence and UV-Vis spectroscopy. A mechanism involving the possible formation of nanobelts based on surfactant template was also proposed.

• Smart Structures and Systems
• /
• v.20 no.1
• /
• pp.43-52
• /
• 2017

Structural health monitoring has drawn great attention in the field of civil engineering in past two decades. These structural health monitoring methods evaluate structural integrity through high-quality sensor measurements of structures. Due to electronic deterioration or aging problems, sensors may yield biased signals. Therefore, the objective of this study is to develop a fault detection method that identifies malfunctioning sensors in a sensor network. This method exploits the autoregressive modeling technique to generate a bank of Kalman estimators, and the faulty sensors are then recognized by comparing the measurements with these estimated signals. Three types of faults are considered in this study including the additive, multiplicative, and slowly drifting faults. To assess the effectiveness of detecting faulty sensors, a numerical example is provided, while an experimental investigation with faults added artificially is studied. As a result, the proposed method is capable of determining the faulty occurrences and types.