• Journal of the Korean Society of Radiology
• /
• v.10 no.5
• /
• pp.321-325
• /
• 2016

Dose creep is one of clinical errors that arises from the tester's inexperience or carelessness, and according to Task Group #116 of American Association of Physicists in Medicine, its continued occurrence is being reported in the digital method. At this point, the demand for an automatic exposure control device that minimizes the dose creep phenomenon and can improve reproducibility is increasing. In this study is to consider the automatic exposure control device sensor that can is not only easy to produce, but also reduce the dose creep phenomenon by conducting a research on high-efficient semiconductor sensor. As a result, the Intrinsic-type and PIN-type sensors have excellent optical property compared to Ref sensor, would have less shading effect, and have relatively low sensitivity, but would provide accurate feedback signals to automatic exposure control device with its consistent tendency according to exposure condition changes.

• Clinics in Shoulder and Elbow
• /
• v.15 no.1
• /
• pp.37-42
• /
• 2012

Purpose: To consider the proper management of proximal humerus fracture on gunshot wounds. Materials and Methods: A 28-year-old male patient, who sustained a gunshot injury on the left arm 5 days ago, was admitted through the emergency department. Although he underwent an emergency surgery (bullet fragment removal and debridement), there remained bullet fragments around the proximal humerus fracture site. The wound seemed to be infected and a partial dehiscence occurred. No neurologic deficit was noted. Immediate exploration and debridement were performed, and an external fixator was applied to restore the anatomical alignment and manage the wounds. Intravenous antibiotics were administered. On the 9th postoperative day, wound debridement was done again, and cement beads mixed with antibiotics were inserted. After two weeks, the external fixator was removed, and the pin sites were closed after debridement. One week later, the open reduction and internal fixation with locking compression plate and screws were done. Result: At 3 months after the internal fixation, the bone union was obtained with satisfactory alignment of the humerus. Conclusion: The severity of the soft tissue injury influences the fracture management plan. Further, the risk on lead toxicity should be considered.

• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.205-224
• /
• 1994

It was aimed to study the costume of Koryo dynasty based upon the thirty pictures of Bud-dha to hang on the wall among the existing Buddist paintings. The costume to study were made about 64 years during the King Chung-yol(1286) to the King Chung-jong(1350) which style was mostly related in Won Dynasty. 가) Men's wear ; 1. Hair style and hair dress ; Man tied up a top knot and they put on the hat such as a Kuan Kun and Mo. The young boys binds his hair up one, two, and three knot-s, and tied up with a hair ribbon, A kinds of Kuan-mo were Mine-lu-kuan Yuan-yu-kuan, Nong-kuan, Hae-chi-kuan Pok-du Yun-wha-kuan Yip-mo- and Tu-ku(Helmeto) 2. clothes ; 1) Colour of Koryo King's Mien-ku Kuan costume was not agree with blue and reddish black colour which was used in Yo, Song, Kum and Won Dynasty, however black and greenhish blue colour was agreed with. 2) The king wore T'ung-t'ien-kuan(Yuan-yu-kuan) and the government officials wore Chin-hien-kuan Hae-chi-kuan and Nong-kuan as a court dress. In general the king and the Crown Prince wore a hats which was used in T'ung-t'ien system however sometimes they wore small hats which was cited in literature. 3) Gate guard and upper garment wore colourful costume figured gold colour pattern which was distin-gtive costume system of Koryo. 4) A monk wore big sleeve long skirt big sleeve long jacket long skirt and shoulder scar-f full shoulder scarf or right hand shoulder opened scarf. 5) The Soldiers wore helmet shoulder or scarf pee-back hung-kap, pok-kap, yang-dan-g-kap we-yu-kap kun-kap, and boots and they carried arms. 6) The young boys wore scarf, loin cloth, long skirt, belt neckless, wan-silk, boots and foots wear and wristless. 나) Women's wear ; 1. Hair style and hairs and tied up with a hair ribbon and wore precious ston decorated hair dress wheel shape hair dress pan shaped head dress handkerchif covered hair dress decorated precious stone hair pin silk chippon made of head dress muf-fler shaped hairdress. Boots mocasin hae lee, suk and sandle wored as a shoes depends on the classes. They wore neckless, earing wres-tless and wan-pu-sik. 2. Closthe 1) High rank lade's wore un-kyun attached jacket and jacket sleeves decorated pleats and pleats decorated long skirt apron back apron knot belt, scarf this type is the same with Dang Dynasty five dynasty of china Song, Kum Won, Myung Dynasty and our cos-tume of Poe-hae, and Shilla Dynasty.

• Microbiology and Biotechnology Letters
• /
• v.26 no.1
• /
• pp.83-88
• /
• 1998

Heavy metal removal by Z. ramigera 115 and soluble slime polymer producing mutant Z. ramigera 115SLR was investigated. Both strains showed similar tolerance against $Cd^{2+}$, $Co^{2+}$, $Cu^{2+}$, $Ni^{2+}$ and $Fe^{2+}$. When cells were cultivated in the presence of 500 ppm $Cd^{2+}$, the mutant strain removed 1.5 fold more metal than the wild type did at same biomass. Metal adsorption capacities were in the order of Z. ramigera l15SLR polymer > Z. ramigera 115 polymer > Z. ramigera 115 cell >Z. ramigera l15SLR cell. The optimum pH for metal adsorption was 7.5. Langmuir and Freundlich isotherms indicated that Qmax and 1/n of Z. ramigera l15SLR polymer were 164.2 mg $Cd^{2+}$/g dw and 0.496, respectively. These results showed that the polymer of Z. ramigera l15SLR could be used as an effective metal adsorbate.

• Clinics in Shoulder and Elbow
• /
• v.14 no.1
• /
• pp.94-98
• /
• 2011

Purpose: We present a case of anterior glenoid rim comminuted fracture that was treated with arthroscopic reduction and an AO headless compression screw (HCS) fixation. Materials and Methods: A 31-year old man complained of left shoulder pain after falling down on stairs. The anterior glenoid comminuted fragments were arthroscopically reduced. Fixation with an AO HCS was done after placement of 1.1 mm Kirschner wire as a guide pin through a standard cannulated anterosuperior portal. Results: Twelve months after the operation, union of the fracture was achieved and the range of motion was fully recovered. He did not complain of any discomfort during his activities of daily living. Conclusion: An AO HCS had various screw sizes and this was good for fixation of a small glenoid fracture and a long drill bit and screw driver were useful for fixation of deep seated glenoid fracture. A short guide wire could be replaced by a 1.1 mm K-wire. An AO HCS was useful for fixation of an anterior glenoid rim comminuted fracture.

• Korean Journal of Food Science and Technology
• /
• v.45 no.3
• /
• pp.350-355
• /
• 2013

The quality of fermented dropwort extract (FDE) and fermented dropwort vinegar (FDV) was assessed for free sugar, organic acid and free and total amino acid content. Major organic acids were lactic acid in FDE and acetic acid in FDV. Free sugars in FDE were fructose and glucose, and those in FDV were fructose, sucrose, and maltose. Aspartic acid was the major free amino acid in both FDE and FDV. Additionally, the main free amino acids in FDE were alanine and ${\gamma}$-amino-n-butyric acid (GABA), while those in FDV were arginine and valine. Moreover, to investigate the protective effects of FDE and FDV against oxidative stress induced by t-BHP and $H_2O_2$, C6 cells were treated with FDE or FDV prior to inducing the oxidative damage. FDE and FDV inhibited cell death significantly in a dose-dependent manner. These data imply that FDE and FDV may be effective in neuronal cell protection against oxidative damage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1576-1581
• /
• 2013

In the present study, the performance of a PF heat exchanger for heat pump dryer was investigated. Capacity and dehumidification amount of the PF heat exchangers(PF1, PF2, PF3) by different inclination angles($0^{\circ}$, $30^{\circ}$, $60^{\circ}$) were studied. Experimental conditions were an air velocity crossing to the heat exchanger(0.5m/s), an air dry-bulb temperature($60^{\circ}C$) and relative humidity(70%). The experimental results have shown that the performance of the inclined PF heat exchangers was better than that of the vertically installed one. PF3 showed better performance compared to PF1 and PF2 due to the large pin pitch which are leading to more draining for dehumidified water. But, capacity and dehumidification amount of the PF heat exchanger at the inclination angles of $60^{\circ}$ was decreased due to pressure drop. Also, to predict the experimental data of the PF heat exchanger, the performance program was developed for the inclination angles of $0^{\circ}$. PF heat exchanger performance between experiment data and calculation data was satisfied within the maximum 2% for capacity and 3% for dehumidification amount.

• Journal of Mushroom
• /
• v.10 no.4
• /
• pp.160-166
• /
• 2012

The effects of fixed and variable temperatures on fruiting body formation and characters of mushrooms were investigated with normal and thinning treatment plots. In fixed temperature, as temperature was lower, period of harvest was longer as well as days for pinheading in the both of normal and thinning plots. Harvest rate were 91.0, 90.3, and 95.8% at $13^{\circ}C$, $17^{\circ}C$, and $15^{\circ}C$. In the thinning plot, qualities of mushrooms were 7.5, 8.1, and 7.7, and yields were 86.0, 105.9, 104.0g at 13, 15, and $17^{\circ}C$ respectively. In variable temperature with a variable temperature plot, condition II($17^{\circ}C$ for pin-heading(before reverting, 7-8 days)${\rightarrow}16^{\circ}C$ for extending primodia(before thinning, 4-5 days)${\rightarrow}15^{\circ}C$ for extending (after thinning)) was the best for yield which was better than other conditions by 17.4% and 4.0% and quality of mushroom was highest 8.1 among all conditions.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.228-235
• /
• 2008

Nickel plating thickness increased with the electric current density, and the augmentation was more thick in $6{\sim}10A/dm^2$ than low current. Hull-cell analysis was tested to evaluate the current density. Optimum thickness was obtained at a temperature of $60^{\circ}C$, and the pH fluctuation of 3.5~4.0. Over the Nickel ion concentration of 300 g/L, plating thickness increased with the current density. The rate of decrease in nickel ion concentration was increased with the current density. The quantity of plating electro-deposition was increased at the anode surface, which was correlated with the increase of plating thickness. The plating thickness was increased because of the quick plating speed. However, the condition of the plating surface becomes irregular and the minuteness of nickel plating layer was reduced with the plating rate. After the corrosion test of 25 h, it was resulted in that maintaining low electric current density is desirable for the excellent corrosion resistance in lustered nickel plating. According to the program simulation, the thickness of diffusion layer was increased and the concentration of anode surface was lowered for the higher current densities. The concentration profile showed the regular distribution at low electric current density. The field plating process was controlled by the electric current density and the plating thickness instead of plating time for the productivity. The surface physical property of plating structure or corrosion resistance was excellent in the case of low electric current density.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.53-59
• /
• 2005

In this study, the supercritical electroplating was investigated by forming macroemulsion of electroplating solution using surfactant in supercritical $CO_2$. The fluorinated analogous AOT surfactant, sodium salt of bis (2,2,3,3,4,4,5,5-octafluoro-1-pentanol) sulfosuccinate which has both '$CO_2$ philic' chains and 'hydrophilic' head group was used as a surfactant, and Ni plate and Cu plate were used as the anode and the cathode, respectively. Electroplating was carried out in the conventional method and the supercritical macroemulsion and both results were compared. The supercritical electroplating was carried out in various concentration of surfactant such as 2, 4, 7 wt%, the volume ratio of Ni-plating solution to $CO_2$ was varied in the range of 10-70 vol%, and propane was used as a supercritical fluid instead of $CO_2$. According to the experimental results, the plated surface of Ni on Cu plate performed in supercritical macroemulsion was better than that, in conventional state. In the image of Ni surface plated on Cu plate in supercritical state, there were fewer pin-holes and pits comparing with that in the conventional process. The current and conductivity was increased as the volume ratio of Ni-plating solution to $CO_2$ was increased and the current and the amount of Ni plated on Cu plate were decreased as the concentration of surfactant become higher. In addition, in case of the continuous phase, using $CO_2$ was more effective than using $CO_2$.