• 디지털산업정보학회논문지
• /
• 제12권1호
• /
• pp.51-61
• /
• 2016

Because the Apple Pay which created by U.S's Apple Inc. and launch of Samsung pay in last August in domestic, people have high interest in Pin-Tech industries and new method of easy payment. In this paper, it will study newly introduced Pin-Tech industries and marketability of Pin-Tech industries. Also it will propose safe use of Pin-Tech services based on cases in domestic and overseas. This paper is organized as follows. In Chapter 2, it will study concept of Pin-Tech services and status of Pin-Tech services in domestic and overseas. In Chapter 3, it will look technical trends of Pin-Tech services. In Chapter 4, it will propose direction based on analysis of cases of Pin-Tech services. This paper will finish with conclusion in Chapter 5. Given the global trends, Korea is now just took the first steps in new Pin-Tech era. The Pin-Tech services are in situations that it is not yet activated in domestic due to the various financial regulations and procedures. In this paper, it will shows cases of concerns of Pin-Tech services and domestic authentication which relates to easy payment certification. If Pin-Tech services are develop with easy payment certification and adapt to domestic environment and develop based on stability and security as mentioned in this paper, domestic Pin-Tech services and security technology will grow to the world level. Also it requires unceasing research and efforts from relevant government officials, security companies and Pin-Tech ICT companies.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.647-652
• /
• 2015

A probe pin is a key component of LED inspection equipment. The probe pin makes contact with the LED electrodes and supplies an electric current. Because the mechanical and electrical homogeneity of the probe surface affects the service life and reliability, its characterization is essential. For this study, the hardness was measured using a micro-Vickers hardness test. Moreover, the thicknesses of the plating at different locations and the elemental compositions were examined using an FE-SEM. The uniformity of the plating was found to be acceptable because palladium was detected consistently throughout the tested domain. In addition, the hardness of the surface was determined to be higher than that of the typical palladium range, which is attributed to the use of undercoated nickel.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.29-34
• /
• 2002

This paper presents formation of ejector-pin hollowness in injection molding. Injection molding process is widely used in production of plastic part for good dimensional accuracy and high productivity. However, the injection molding leaves ejector-pin hollowness on pal, which causes bad part surface and quality. Dimensions and profiles of ejector-pin hollowness are measured for formation or ejector-pin hollowness. The formation of ejector-pin hollowness is traced with dimensions and profiles of ejector-pin hollowness. The compression force and moment cause ejector-pin to form hollowness on part surface.

• 정보보호학회논문지
• /
• 제27권4호
• /
• pp.843-853
• /
• 2017

"공인인증서 의무 사용" 폐지에 따라 모바일 기반 금융 서비스의 자율성이 높아지면서 다양한 인증 수단이 제공되고 있다. 대표적인 인증 수단으로는 SMS, ARS, PIN, 텍스트 패스워드, 지문 등이 있다. 본 연구에서는 통일된 모바일 환경에서 인증수단의 사용성, 안전성을 분석하였다. 사용성 평가에 있어서 SUS (System Usability Scale), 인터뷰를 통해 평가를 진행하였으며, NIST에서 제시한 전자인증가이드라인을 이용하여 각 인증 수단에 대한 안전성을 평가하였다. 연구 결과 지문 인식 기반 인증 수단이 가장 높은 사용성 등급을 나타내는 Excellent로 평가되었으며, 안전성 분석 결과에서도 지문 인식 기반 인증 수단이 Security Level 4를 획득하여 가장 안전한 인증 수단으로 평가되었다.

• 정보보호학회논문지
• /
• 제27권5호
• /
• pp.1033-1047
• /
• 2017

사용자의 인증 프로세스에 대한 인식을 필요로 하는 기존의 명시적 인증은 그 과정에서 사용자에게 많은 부담이 되며 이는 사용자가 인증을 기피하는 원인이 되고 있다. 본 연구를 통해, 우리는 바이오 인식 및 위치 기반 인증 방법과 같은 내재적 인증 방법을 사용하여 사용자 인증의 편의성을 달성하는 방안을 제안한다. 이를 위해 명시적 인증으로 달성할 수 있는 4단계 보증 레벨을 정의하고, 내재적 인증 방법과 명시적 인증 방법과 같이 사용하여 보다 적은 인증 비용으로 동일 단계의 신뢰 보증 레벨에 도달할 수 있음을 보인다. 제안 방법의 유효성을 보이기 위해, 스크린 키보드 기반 인증, 얼굴인식 기반 인증, 위치 기반 인증을 내재적 인증 기법으로 도입하며 이를 안드로이드 응용으로 구현하였다. 실험 분석 결과, 제안 방법은 패스워드 인증 대비 21.7%, 6자리 PIN 인증 대비 14.9%의 비용 절감 효과를 달성하였다.

• 동위원소회보
• /
• 제21권4호
• /
• pp.55-65
• /
• 2006

A passive type radon monitor adopting two silicon PIN detector as radiation detector has been developed, manufactured and test-evaluated. A radiation signal processing circuit has been electronically tested and then the radiation detection characteristics of this instrument has been performance-tested by using reference radon concentration and a reference photon radiation field. As a result, in a electronic performance test, radiation signals from each detector were well observed in each signal processing circuit. The radiation detection sensitivity of this instrument after several test-irradiations to a Cs-137 gamma radiation source and a standard radon concentration appeared to be 1.37 cph/$\mu$Svh-1 and 1.66 pCi/L respectively. The developed radon monitor in this paper could be used conveniently in monitoring of radon concentration in buildings which population utilize in Korea.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1004-1005
• /
• 2006

The effect of tempering temperature and microstructure on dry sliding wear behavior of quenched and tempered PM with 0.3% graphite and 1-2% Ni steels was investigated. The sintered specimens were quenched from $890^{\circ}C$ and then tempered at $200^{\circ}C$ and $600^{\circ}C$ for 1 hr. Wear tests were carried out on the quenched$\neq$tempered specimens under dry sliding wear conditions using a pin-on-disk type machine at constant load and speed. The experimental results showed that the wear coefficient effectively increased with increasing tempering temperature and decreased with increasing Ni content.

• 한국기계가공학회지
• /
• 제19권10호
• /
• pp.74-80
• /
• 2020

Crawler-type hydraulic devices facilitate forward and backward driving of construction equipment by converting power into mechanical energy. The existing hydraulic device performance test process is time- and labor-intensive. This study aims to improve efficiency and productivity by automating the hydraulic device production performance test processes, which have been separately conducted so far. We also used SolidWorksⓇ, a 3D modeling program, and ANSYSⓇ, a structural analysis tool, for structural analysis and to verify the suitability of fixing pins required for connecting a hydraulic device to performance test equipment. Our results that employing an automated hydraulic device performance test process improves efficiency.

• 디지털산업정보학회논문지
• /
• 제13권4호
• /
• pp.107-113
• /
• 2017

Open platform technology in the banking industry is anticipated to impact the market very positively together with the activation of Fin Tech services. The domestic environment of payment services has been rapidly changing into the mobiles and multiple new payment services have been introduced from a variety of vendors. However, the convenience of payment always causes worsening the security, and the accidents on the security have been continued to occur such as leakage of personal information, hacking and so on upon the expansion of the industry and the market size. This study aims to analyze the status of Fin Tech open platforms and various problems of the related standard technologies, and to suggest the possible solutions. Upon the analysis results, it was confirmed that multiple solutions were required to improve the main security protocols of open platforms and to process the security functions diversely. In conclusion, the results of this study will be helpful to determine the direction of the solution on the security issues in the open platform environment of the current industry.

• 한국전자파학회논문지
• /
• 제27권12호
• /
• pp.1084-1096
• /
• 2016

본 논문에서는 12.5 Gbps의 전송 속도를 갖는 고속 직렬 인터페이스 커넥터(high-speed serial interface connector)의 설계 및 분석 방법을 제안한다. 고속 직렬 인터페이스 커넥터는 다양한 매질로 구성되며, 내부 선로도 복잡한 구조를 가지고 있으므로, 선로의 불연속 부분의 각각을 임피던스 정합하기가 매우 어렵다. 따라서 커넥터의 각 부분을 단순화한 커넥터 라인(connector line)의 구조를 제안하였으며, 이 구조에서 R, L, C, G 파라미터를 추출하고 차동 모드 임피던스를 분석하며, TDT(Time Domain Transmissometry)와 TDR(Time Domain Reflectometry)을 이용하여 임피던스 불연속(impedance discontinuity)을 최소화 하는 방법을 제시한다. 본 논문은 단순화한 커넥터 라인에서 추출된 분석 방법 및 결과를 고속 직렬 인터페이스 커넥터에 적용하였다. 제안한 커넥터는 총 44개의 핀(pin)으로 구성되며, 본 논문에서는 4개의 핀의 폭과 간격을 변경하여 신호 전달 특성을 분석하였다. 분석결과, 접지 핀의 폭이 증가할수록 임피던스는 소폭으로 감소하고, 접지핀과 신호 핀 사이의 간격이 증가할수록 임피던스가 증가했다. 또한, 신호 핀의 폭을 증가시키면 임피던스가 감소하며, 신호 핀과 신호 핀 사이의 간격을 늘리면 임피던스가 증가하였다. 최초 커넥터 임피던스 특성은 $96{\sim}139{\Omega}$ 사이에서 변화되는 값을 나타내었으나, 제안된 커넥터 구조를 적용했을 때 임피던스 특성은 $92.6{\sim}107.5{\Omega}$ 사이의 값으로 나타나, 설계 목표 $100{\Omega}{\pm}10%$를 만족함을 보였다.