• 제목/요약/키워드: Pin Method

검색결과 682건 처리시간 0.031초

유리 공장 피판술 후 외부 감시 피판의 유용성 (Usefulness of External Monitoring Flap in the Buried Jejunal Free Flap)

  • 김백규;장학;민경원;홍준표;고경석
    • Archives of Plastic Surgery
    • /
    • 제34권4호
    • /
    • pp.432-435
    • /
    • 2007
  • Purpose: The jejunal free flap has the shorter ischemic time than other flap and requires a laparotomy to harvest it. As the evaluation of the perfusion the buried flap is very important, the perfusion of the buried jejunal free flap requires monitoring for its salvage. We tried to improve the monitoring flap method in the jejunal free flap and examined its usefulness. Methods: From March 2002 to March 2006, the monitoring flap method was applied to 4 cases in 8 jejunal free flaps for the pharyngeal and cervical esophageal reconstructions. The distal part of the jejunal flap was exposed without suture fixation through cervical wound for monitoring its perfusion. The status of perfusion was judged by the color change of jejunal mucosa and mesentery. If necessary, pin prick test was performed. Doppler sonography was applied to mesenteric pedicle of the monitoring flap in case of suspicious abnormal circulation. Results: The monitoring flap shows no change in 3 cases, but the congestion happened in one case at the 12 hours after the operation. This congestion was caused by the twisting or kinking of the mesenteric pedicle of the monitoring flap. So, we fixed up the monitoring flap close to adjacent cervical skin for prevention of rotation. Finally, the main part of transferred jejunal flap was intact. Conclusion: The success of a jejunal free flap depends on close postoperative monitoring and early detection of vascular compromise. So, various monitoring methods have been tried, for instance, direct visualization using a fiberoptic pharyngoscope, through a Silastic window placed in the neck flap, or external surface monitoring with an Doppler sonography, use of a buried monitoring probe. But, all of the above have their own shortcomings of simplicity, non-invasiveness, reliability and etc. In our experience, monitoring flap can be a accurate and reliable method.

얼음증발기 용접방법 개선에 관한 연구 (A Study on the Improvement of Welding Method for Ice Evaporator)

  • 이정연;유흥렬;손영득
    • 한국산학기술학회논문지
    • /
    • 제22권2호
    • /
    • pp.558-564
    • /
    • 2021
  • 정수기는 최근 시장규모가 급격한 증가 추세에 있으며, 얼음 정수기의 얼음 생성량과 냉수 성능을 결정하는 핵심 부품인 증발기의 용접기술 향상을 요구하고 있다. 얼음 정수기의 finger type 증발기는 얼음을 탈빙 시키는 방법으로 순간 히터 방식과 고온 가스 방식으로 크게 구분되며 일부 대기업을 중심으로 생산 및 개발이 진행되고 있다. 두 방법은 장·단점을 가지고 있으며 고온 가스 방식 증발기는 특히 생산과정에서 고열의 산소 용접으로 인해 동파이프 내부에 pin hole 현상과 고압관 용접시 막힘 문제가 간헐적으로 발생하고 있다. 이는 정수기 사용시 얼음과 차가운 물의 생기지 않는 문제점을 가져오며 현장에서 수리가 불가능하다. 이러한 문제점을 해결하기 위해 본 논문에서는 고온 가스 증발기의 용접 불량을 개선하기 위해 cap jig를 적용하였다. 또한 산소용접 불꽃 크기를 조절하여 cap jig에 열원이 잘 공급될 수 있도록 하고 파압 시험과 테스트와 열충격 시험을 통해 유효성을 확인하였다.

효율적인 피사계 심도 생성을 위한 두 가지 기법 (Two Efficient Methods for Generating Depth-of-Field)

  • 서영선;임인성
    • 한국컴퓨터그래픽스학회논문지
    • /
    • 제14권3호
    • /
    • pp.31-46
    • /
    • 2008
  • 피사계 심도란 카메라에서 초점이 맞은 지점을 전후로 초점이 맞은 것과 유사한 선명도를 가지는 영역을 말한다. 이 영역을 벗어난 물체들은 아웃 포커싱 되어 흐릿하게 보이게 된다. 렌더링 한 이미지에 피사계 심도 효과를 내게 되면 그렇지 않은 이미지에 비해 훨씬 사실적인 영상을 얻을 수 있다. 렌더링에서 피사계 심도 효과를 내기 위한 기존 연구는 크게 두 가지로 나눌 수 있다. 먼저 분산 광선 추적법은 한 픽셀에 대해 주어진 렌즈 영역을 샘플링 하는 방법이다. 이 방법은 샘플링 횟수가 많아질수록 노이즈가 없는 정회한 영상을 얻게 되지만 그러기 위해서는 시간이 매우 많이 걸린다. 반면 후처리 방법은 광선 추적법 등을 이용하여 얻은 핀홀 카메라 이미지와 깊이 정보를 이용하여 피사계 심도 효과를 내는 것인데 분산 광선 추적법 만큼 정확하지는 않지만 훨씬 빠른 속도로 유사한 결과를 얻을 수 있어 많은 연구가 진행되어 왔다. 그러나 후처리 방법은 핀홀 카메라에서 생성된 이미지만을 이용하므로 실제 렌즈에서 보이는 모든 정보를 알 수 없다는 한계가 존재한다. 본 논문에서는 이러한 두 가지 형태의 방법을 각각 발전시켜 후처리 기반 피사계 심도 계산의 정확도를 높이는 방법과 분산 광선 추적법의 계산 속도를 향상시키는 방법을 제시한다.

  • PDF

노인의 혈중 호모시스테인, 엽산, 비타민 $B_{12}$ 수준 및 영양소 섭취 상태와 신경인지기능과의 관련성 (Relationship among Plasma Homocysteine, Folate, Vitamin $B_{12}$ and Nutrient Intake and Neurocognitive Function in the Elderly)

  • 김희정;김혜숙;김기남;김꽃핀;손정인;김성윤;장남수
    • Journal of Nutrition and Health
    • /
    • 제44권6호
    • /
    • pp.498-506
    • /
    • 2011
  • This study examined the relationship among plasma homocysteine, folate, and vitamin $B_{12}$ levels and neurocognitive function in 118 community-dwelling elderly subjects (mean age, $75.1{\pm}6.7$ years). The Mini-Mental State Examination (MMSE-KC) was used to screen and assess neurocognitive function in the participants. Dietary intake data including the use of dietary supplements were obtained using the 24-hour recall method by well-trained interviewers. Plasma folate and vitamin $B_{12}$ concentrations were analyzed by radioimmunoassay, and homocysteine was assessed by a high performance liquid chromatography-fluorescence method. The proportions of participants with suboptimal levels of plasma folate (< 3 ng/mL), vitamin $B_{12}$ (< 221 pmol/mL), and homocysteine (> $15{\mu}mol/L$) were 16.1%, 5.9%, and 21.2%, respectively. A multiple regression analysis showed that plasma homocysteine was negatively associated with plasma folate and vitamin $B_{12}$ levels. The MMSE-KC test scores were significantly associated with plasma homocysteine and folate, but not with vitamin $B_{12}$, after adjusting for age, gender, body mass index, living with spouse, education, current smoking, energy intake, and chronic diseases such as hypertension, diabetes, thyroid disease, dyslipidemia, stroke, and cardiovascular disease. A general linear model adjusted for covariates revealed that MMSE-KC test scores increased from the lowest to the highest quartiles of vitamin $B_1$, vitamin $B_2$, vitamin $B_6$, vitamin $B_{12}$, and vitamin C intake (p for trend = 0.012, 0.039, 0.014, 0.046, 0.026, respectively). These results indicate that the problem of folate inadequacy and hyperhomocysteinemia are highly prevalent among community-dwelling elderly people and that dietary intake of the B vitamins and vitamin C is positively associated with cognitive function scores.

박형 태양 전지 모듈화를 위한 레이져 태빙 자동화 공정(장비) 개발 (Development on New Laser Tabbing Process for Modulation of Thin Solar Cell)

  • 노동훈;최철준;조헌영;유재민;김정근
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 춘계학술대회 초록집
    • /
    • pp.58.1-58.1
    • /
    • 2010
  • In solar cell module manufacturing, single solar cells has to be joined electrically to strings. Copper stripes coated with tin-silver-copper alloy are joined on screen printed silver of solar cells which is called busbar. The bus bar collects the electrons generated in solar cell and it is connected to the next cell in the conventional module manufacturing by a metal stringer using conventional hot air or infrared lamp soldering systems. For thin solar cells, both soldering methods have disadvantages, which heats up the whole cell to high temperatures. Because of the different thermal expansion coefficient, mechanical stresses are induced in the solar cell. Recently, the trend of solar cell is toward thinner thickness below 180um and thus the risk of breakage of solar cells is increasing. This has led to the demand for new joining processes with high productivity and reduced error rates. In our project, we have developed a new method to solder solar cells with a laser heating source. The soldering process using diode laser with wavelength of 980nm was examined. The diode laser used has a maximum power of 60W and a scanner system is used to solder dimension of 6" solar cell and the beam travel speed is optimized. For clamping copper stripe to solar cell, zirconia(ZrO)coated iron pin-spring system is used to clamp both joining parts during a scanner system is traveled. The hot plate temperature that solar cell is positioned during lasersoldering process is optimized. Also, conventional solder joints after $180^{\circ}C$ peel tests are compared to the laser soldering methods. Microstructures in welded zone shows that the diffusion zone between solar cell and metal stripes is better formed than inIR soldering method. It is analyzed that the laser solder joints show no damages to the silicon wafer and no cracks beneath the contact. Peel strength between 4N and 5N are measured, with much shorter joining time than IR solder joints and it is shown that the use of laser soldering reduced the degree of bending of solar cell much less than IR soldering.

  • PDF

4차 산업혁명 시대의 비대면 국민연금서비스에 관한 연구 (A Study on Non-Facing Services of National Pension in the era of the 4th industrial revolution)

  • 민기채;이규성
    • 문화기술의 융합
    • /
    • 제4권3호
    • /
    • pp.139-147
    • /
    • 2018
  • 본 연구는 4차 산업혁명 시대에 부합하는 국민연금서비스는 어떠해야 하는가라는 문제의식으로 출발한다. 이를 위해 국내와 해외의 공공 및 민간 기관의 비대면 서비스 현황을 검토하고, 이를 바탕으로 중장기적으로 국민연금공단의 비대면 서비스를 활성화하기 위한 시사점을 도출하고자 한다. 먼저 국민연금공단의 비대면 서비스 현황과 본인인증 방식을 검토하였다. 다음으로 미국, 영국, 캐나다, 호주의 공적연금기관 및 민간기관의 비대면 공적연금서비스 현황 및 본인인증 방식을 검토하였다. 분석 결과에 기초한 시사점으로 4차 산업혁명의 국민연금서비스에 미치는 영향분석과 미래전략 도출, 업무별 비대면 신고 신청 방법의 채널 확대, 비대면 본인인증방식으로서 핀테크 도입, 연금서비스를 포함한 생활서비스를 통합적으로 관리할 인터넷통합포털 구축을 통한 서비스 채널 단일화를 제시하였다. 4차 산업혁명 시대 국민연금 비대면서비스의 장기적 과제로 정부민원 통합포털의 초연결성 확보, 인공지능로봇의 도입을 통한 지능화 및 자동화를 고려할 수 있다.

RF 마그네트론 스퍼터링법에 의한 a-축 배향 $YBa_2Cu_3O_{7-\delta}$박막의 제조 (Preparation of a axis oriented $YBa_2Cu_3O_{7-\delta}$ thin films by RF magnetron sputtering)

  • 이재준;김영환;신진;이경희;최상삼;한택상
    • 한국재료학회지
    • /
    • 제4권4호
    • /
    • pp.459-465
    • /
    • 1994
  • a-측으로 배향된 $YBa_2Cu_3O_{7-\delta}$ 고온 초전도 박막을 $LaAIO_{3}$(100)단결정 기판에 이중 타게트 off-axis rf마그네트론 스퍼터링법으로 증착하였다. 박막은 기판온도(Ts)$590^{\circ}C$$680^{\circ}C$사이에서 단일공정으로 증착하는 one-step방법과, $590^{\circ}C$의 저온에서 a-축으로 배향된 YBCO박막(두께-30nm)을 면저 만들어 틀로 작용시킨 후 그 틀위에 나머지 부분을 기판온도를 승온하면서 증착하는 방법인 two-step방법 등 두 가지 방법을 사용하여 증착시켰다. one-step방법에서는 $T_s$가 증가함에 따라 감소하였으며, ($00 \ell$)피크는 증가하였다. Two-step방법으로 증착한 박막은 증착속도가 감소함에 따라 (h00)피크가 우세하게 나타났다. 박막의 미세구조는 a-축, c- 축 배향성이 혼재하여 핀홀과 같은 결함들이 생성되었다. 모든 경우 $T_s$가 감소함에 따라 a-축 배향성은 우세하였으나 전기적 특성은 저하되었고, 긴 전이온도 폭을 가졌다.

  • PDF

Atmospheric Turbulence Simulator for Adaptive Optics Evaluation on an Optical Test Bench

  • Lee, Jun Ho;Shin, Sunmy;Park, Gyu Nam;Rhee, Hyug-Gyo;Yang, Ho-Soon
    • Current Optics and Photonics
    • /
    • 제1권2호
    • /
    • pp.107-112
    • /
    • 2017
  • An adaptive optics system can be simulated or analyzed to predict its closed-loop performance. However, this type of prediction based on various assumptions can occasionally produce outcomes which are far from actual experience. Thus, every adaptive optics system is desired to be tested in a closed loop on an optical test bench before its application to a telescope. In the close-loop test bench, we need an atmospheric simulator that simulates atmospheric disturbances, mostly in phase, in terms of spatial and temporal behavior. We report the development of an atmospheric turbulence simulator consisting of two point sources, a commercially available deformable mirror with a $12{\times}12$ actuator array, and two random phase plates. The simulator generates an atmospherically distorted single or binary star with varying stellar magnitudes and angular separations. We conduct a simulation of a binary star by optically combining two point sources mounted on independent precision stages. The light intensity of each source (an LED with a pin hole) is adjustable to the corresponding stellar magnitude, while its angular separation is precisely adjusted by moving the corresponding stage. First, the atmospheric phase disturbance at a single instance, i.e., a phase screen, is generated via a computer simulation based on the thin-layer Kolmogorov atmospheric model and its temporal evolution is predicted based on the frozen flow hypothesis. The deformable mirror is then continuously best-fitted to the time-sequenced phase screens based on the least square method. Similarly, we also implement another simulation by rotating two random phase plates which were manufactured to have atmospheric-disturbance-like residual aberrations. This later method is limited in its ability to simulate atmospheric disturbances, but it is easy and inexpensive to implement. With these two methods, individually or in unison, we can simulate typical atmospheric disturbances observed at the Bohyun Observatory in South Korea, which corresponds to an area from 7 to 15 cm with regard to the Fried parameter at a telescope pupil plane of 500 nm.

MBS 방법으로 제작한 집적형 Triplexer의 광학 설계 (Optical Design of the Integrated Triplexer Fabricated by Micro Block Stacking Method)

  • 윤현재;김종혁
    • 한국광학회지
    • /
    • 제22권4호
    • /
    • pp.191-197
    • /
    • 2011
  • 본 논문에서는 FTTH(fiber to the home) 망에 사용되는 $1.55{\mu}m$ 파장의 아날로그 신호 수신과 $1.31{\mu}m/1.49{\mu}m$ 파장의 디지털 신호 송, 수신이 가능한 집적형 Triplexer를 설계하였다. 이 집적형 Triplexer는 세라믹 재질로 정밀 제작한 서브마운트, 레이저 다이오드 홀더, 포토다이오드 홀더를 이용하여 마이크로 볼렌즈, WDM 필터, FP-LD, PIN-PD 등 광부품을 광 축에 자동으로 정렬시키는 micro block stacking 방법으로 제작 가능한 구조로 설계하였으며 code V 소프트웨어를 이용하여 각 부품의 제작 공차와 조립 공차에 따른 초점의 위치 변위를 분석하였다. 공차 분석 결과 송신부에서 초점의 위치 변화에 가장 큰 영향을 주는 것은 LD spot의 위치 변위로 x, y, z 방향으로 각각 ${\pm}25{\mu}m$, ${\pm}25{\mu}m$, ${\pm}30{\mu}m$ 움직였을 때 초점이 최대 $72{\mu}m$ 이동하였으며 수신부의 경우 0.8mm 볼렌즈(아날로그 신호 수신부)와 마이크로 볼 렌즈(디지털 신호 수신부) 위치 변화가 가장 큰 영향을 주는 것을 알 수 있었으며 디지털 신호 수신부의 경우 마이크로 볼 렌즈가 x, y, z 방향으로 각각 ${\pm}55{\mu}m$, ${\pm}5{\mu}m$, ${\pm}55{\mu}m$ 움직였을 때 초점이 최대 $55{\mu}m$ 이동하였다.

순물을 이용한 꽃송이 버섯 균사체 배양액의 항균활성 평가 (Antimicrobial Effect of the Submerged Culture of Sparassis crispa in Soybean Curd Whey)

  • 이은지;김지은;박민주;박동철;이삼빈
    • 한국식품저장유통학회지
    • /
    • 제20권1호
    • /
    • pp.111-120
    • /
    • 2013
  • 꽃송이 버섯 균사체 배양의 최적 조건을 확립하여 얻어진 꽃송이 버섯 균사체 배양액에 대한 항균활성을 검색하였다. 순물에 glucose 2%를 첨가하여 10일 배양한 꽃송이 버섯 배양액은 pH 6.91, 균사체 함량은 17.76 g/L로 나타났으나, 제한 배지에서 10일 배양 후 분석한 결과, pH 3.26, 균사체 함량은 3.45 g/L로 측정되었다. 또한 순물을 이용한 버섯 배양액의 수용성 단백질 함량은 511.85 mg%, 타이로신 59.6 mg%, 환원당 188.44 mg%이며, 베타글루칸 함량은 10.64%로 나타났다. 순물을 이용한 꽃송이 버섯 배양액의 항균활성 평가를 위해 8 종의 유해세균에 대한 꽃송이 버섯 균사체 배양액을 disk diffusion method로 항균효과를 검색하였다. B. cereus, St. aureus, L. monocytogenes, S. typhimurium 균주는 0.13 mg/disc에서 6.28 mg/disc의 범위에서 농도 의존적으로 활성이 나타났다. 배양액을 $85^{\circ}C$에서 15분, $100^{\circ}C$에서 5분간 열처리 후에도 항균 활성에서 변화를 보이지 않았다. 또한 한외여과법을 이용하여 3 kDa 이하의 저분자 물질의 항균 활성을 측정한 결과, B. cereus는 34.3 mm, St. aureus는 29.3 mm, L monocytogenes는 23.7 mm, S. typhimurium는 16.7 mm로 생육 억제 환을 보였다. 미세희석법을 이용한 꽃송이 버섯의 항균물질의 최소저해농도(MIC)는 B. cereus 2.6 mg/mL, St. aureus, L. monocytogenes 12.6 mg/mL, S. typhimurium 62.8 mg/mL인 것으로 나타났다. 꽃송이 버섯 배양액의 항균물질은 열과 단백질 분해효소 처리에 안정한 저분자 물질인 것으로 나타나 천연 항균 소재로서 산업적 활용이 기대된다.