• 수산해양기술연구
• /
• 제29권1호
• /
• pp.39-55
• /
• 1993

Modal Analysis is the process of characterizing the dynamic properties of an elastic structure by identifying its modes of vibration. A mode of vibration is a global property of an elastic structure. That is, a mode has a specific natural frequency and damping factor which can be identified from response data at practically any point on a structure, and it has a characteristic mode shape which identifies the mode spatially over the entire structure. Modal testing is able to be performed on structural and mechanical structure in an effort to learn more about their elastic behavior. Once the dynamic properties of a structure are known its behavior can be predicted and therefore controlled or corrected. Resonant frequencies, damping factors and mode shape data can be used directly by a mechanical designer to pin point weak spots in a structure design, or this data can also be used to confirm or synthesize equations of motion for the elastic structure. These differential equations can be used to simulate structural response to know input forces and to examine the effects of pertubations in the distributed mass, stiffness and damping properties of the structure in more detail. In this paper the measurement of transfer functions in digital form, and the application of digital parameter identification techniques to identify modal parameters from the measured transfer function data are discussed. It is first shown that the transfer matrix, which is a complete dynamic model of an elastic plate structure can be written in terms of the structural modes of vibration. This special mathematical form allows one to identify the complete dynamics of the structure from a much reduced set of test data, and is the essence of the modal approach to identifying the dynamics of a structure. Finally, the application of transfer function models and identification techniques for obtaining modal parameters from the transfer function data are discussed. Characteristics on vibration response of elastic plate structure obtained from the dynamic analysis by Finite Element Method are compared with results of modal analysis.

• 한국강구조학회 논문집
• /
• 제24권1호
• /
• pp.73-80
• /
• 2012

합성보는 철골보와 콘크리트슬래브를 스터드볼트로 일체화한 구조이며, 일반적으로 용접을 이용한 스터드볼트(Stud Bolts)가 연결재로 많이 사용된다. 그러나, 스터드볼트는 감전사고와 같은 전기재해나 용접불량 등 문제점을 가지고 있다. 따라서, 드라이빙핀을 이용한 기계적 접합이 대안으로 대두되고 있다. 본 연구는 드라이빙핀 전용 제안형 전단연결재를 이용한 합성보의 횡하중(지진하중이나 풍하중)시 구조적 성능을 평가하고자 한다. 기존형 합성보과 제안형 합성보는 안정된 탄소성 거동을 나타내었으며 기둥주변에서 콘크리트 압괴로 내력이 저하되었다. 따라서, 제안형 합성보는 기존형 합성보를 대체할 수 있을 것으로 판단된다.

• 한국항행학회논문지
• /
• 제18권5호
• /
• pp.445-454
• /
• 2014

본 논문에서는 다목적 디스플레이의 인증 과정에서 수행 했던 시험 중 간접 낙뢰의 영향성을 검증하기 위한 RTCA DO-160 F, Section 22 시험 수행을 위한 대책 설계 내용 및 시험 과정을 소개한다. 낙뢰 유도 전압은 항공기 전기 전자장비의 기능 장애또는 손상을 가져다 주는 데 이것을 낙뢰의 간접영향이라 한다. 이러한 항공기의 낙뢰 간접영향으로부터 항공전자장비를 보호하기 위해서는 항공기에 대한 낙뢰의 영향과 항공기 내부 시스템을 분석하고 해당 부품에 대한 위협 내용에 대한 보호 설계가 필요하다. 본 논문에서는 이와 같은 항공기용 다목적 디스플레이의 낙뢰에 대한 보호를 위하여 대책 수준을 결정을 위한 RTCA DO-160 F, Section 22 category 선정 방법 및 선정된 레벨에 따른 부품 선정 방법 등을 소개한다. 또한 선정된 부품의 설계 유효성을 확인하기 위하여 실제 시험 과정을 소개한다. 이와 같은 각 단계별 과정 소개를 통하여 향후 개발 예정인 항공전자 장비에 대한 낙뢰 대책 설계의 좋은 사례가 될 것으로 예상한다.

• Tribology and Lubricants
• /
• 제35권6호
• /
• pp.356-361
• /
• 2019

The friction and wear between machine components directly influence the energy loss and failure in various machines. Therefore, there is always a demand for finding methods to reduce friction and wear. Of the possible methods, lubrication is a widely used method for reducing friction and wear. In the case of lubrication, it is important to analyze the tribological behavior in the boundary lubrication because most of friction and wear occurs in the boundary lubrication regime. Cast iron has been regarded as a good material for industrial applications due to the excellent mechanical properties and high productivity. Especially, nodular cast iron is a material that shows better mechanical properties and wear-resistance compared with cast iron due to inclusion of spheroidal graphite. In this work, we investigated the tribological characteristics of nodular cast iron with respect to different counter parts in boundary lubrication regime. Sliding tests were conducted with SUJ2, ZrO₂, Si₃N₄ balls as counter parts using a pin-on-disk type tribotester. The results showed different friction and wear behaviors with different counter parts. The case of ZrO₂ showed the lowest wear rate in specimen and no significant ball wear. In case of SUJ2, it showed similar wear rate with ZrO₂ case in specimen and the highest friction coefficient. The case of Si₃N₄ showed the lowest friction coefficient, 33% lower than the case of SUJ2. It showed 16.9 times larger wear rate in specimen and 43% larger wear rate in ball compared to that of the SUJ2 case.

• 대한물리치료과학회지
• /
• 제4권2호
• /
• pp.399-403
• /
• 1997

The purpose of this study was to determine the efficacy of electrode placement on procaine iontophoresis. Thirty-three healthy students with an age range of 19 to 34 years, were participated in this study. The subjects were randomly assigned into 3 groups. Each subjects received iontophoresis on the proximal 1/3 of volar surface of dominant forearm with soft cotton pad($3.5{\times}3.5cm$) soaked in 2 ml of 4% procaine hydrochloride (pH 5.1) at 4 mA for 10 minutes(total current 40 mA min) of anodal DC. In transversal electrode placement(TEP) group, dispersive electrode was placed on the proximal 1/3 of dorsal surface of the forearm. In longitudinal electrode placement (LEP) group and control group, dispersive electrode were placed on the distal 1/3 of volar surface of the forearm. After procaine iontophoresis, duration of anesthesia were evaluated at five minutes intervals on five random locations in the iontophoretically area using a 21-gauge sterile hypodermic needle pressed with 1 mm invagination until return the sharp pin-pricking pain sensation. The data were ana lysed with one-way ANOVA to determine signific~nt differences between groups. The results showed significantly differences in the local anesthetic duration between the 3 groups(p<0.001). The anesthetic durations of TEP group and LEP group were significantly longer when compared with control group(p<0.05). Anesthetic durations of TEP group and LEP group were not significantly difference, but anesthetic duration of LEP group tends to longer than TEP group. In view of these results, clinicians should consider the electrode placement method when performing the iontophoresis.

• 한국항행학회논문지
• /
• 제19권5호
• /
• pp.395-402
• /
• 2015

본 논문에서는 간접낙뢰로 인한 항공기 탑재 컴퓨터의 손상을 보호하기 위한 간접낙뢰 보호장치의 설계 내용 및 시험 과정을 소개한다. 낙뢰로부터 유도된 서지 전압은 항공기 전기 전자장비의 기능 장애나 손상을 가져오는데 이것을 낙뢰의 간접영향이라 한다. 이러한 항공기의 낙뢰 간접영향으로부터 항공전자 장비를 보호하기 위해서는 항공기에 가해진 낙뢰로 인한 영향성을 분석하고 이에 따른 보호 설계를 각각의 장비에 적용한다. 본 논문에서는 보호대상 장비의 간접낙뢰로 인한 손상을 방지하기 위하여 수행한 RTCA DO-160G Section22의 카테고리 분석과 선정을 통한 간접낙뢰 수준 결정, 선정된 레벨에 따른 보호회로 설계 방법을 소개한다. 또한 설계된 보호회로의 유효성 확인을 위해 수행한 낙뢰 간접영향 검증시험 결과를 보인다.

• 한국정보통신학회논문지
• /
• 제20권3호
• /
• pp.457-463
• /
• 2016

본 논문에서는 변형된 내장형 밸런을 사용하여 이중 다이폴 준-야기 안테나(double-dipole quasi-Yagi antenna; DDQYA)의 대역폭을 향상하는 방법에 대하여 연구하였다. 변형된 내장형 밸런은 동일면 스트립 선로의 중앙으로 삽입된 마이크로스트립 선로로 구성되며, 마이크로스트립 선로의 끝은 급전점에서 단락 핀으로 동일면 스트립 선로와 연결되어 있다. 변형된 내장형 밸런의 구조는 DDQYA의 대역폭을 향상시키기 위해 조정하였다. 또한, 제안된 밸런의 back-to-back 구조에서의 성능을 기존 밸런과 비교하였다. 최적화된 변형된 내장형 밸런을 가진 DDQYA 안테나를 FR4 기판 상에 제작하고 특성을 실험한 결과 전압 정재파비(voltage standing wave ratio; VSWR) < 2 이하인 대역은 1.56-3.04 GHz(64.4%)이고, 대역폭이 기존의 밸런을 가진 DDQYA에 비해 증가함을 확인하였다.

• 멤브레인
• /
• 제10권3호
• /
• pp.130-138
• /
• 2000

건/습식 상전환법을 이용하여 비대칭 polyethersulfone (PES) 기체분리막을 제조하였으며, $CO_2$, $N_2$등의 기체에 대한 투과특성을 조사하였다. 분리막 제조에 있어서 주요 변수인 캐스팅 용액과 증발시간 등이 분리막의 구조에 미치는 영향을 파악하고 투과특성을 조사하여 최적의 제조조건을 확립하였다. 또한 제조된 분리막의 표피층에 존재하는 pin-hole과 같은 결점을 보완하기 위하여 실리콘 수지를 코팅하여 그 투과특성의 변화를 조사하였다. 실리콘 수지 코팅이 결점을 보완하는데 효과적임을 확인하였다. 본 연구에서 분리막 제조에 주로 사용한 캐스팅 용액은 PES, 14-methyl-2-pyrrolidone, 아세톤, 에탄올로 구성되었으며, 응고제로는 증류수를 사용하였다. 캐스팅 용액 중의 PES 함량이 높아질수록, 휘발성 유기용매의 비율이 높아질수록, 증발시간이 길수록, 에탄을 첨가제의 농도가 낮을수록 $CO_2$/$N_2$의 선택도는 높아지고 투과도는 낮아지는 결과를 보였다. 최적의 분리막 제조조건 하에서 얻어진 분리막의 분리성능은 $CO_2$/$N_2$의 선택도가 61이고 $CO_2$의 투과도는 21 GPU인 우수한 결과를 보였다.

• 대한족부족관절학회지
• /
• 제14권2호
• /
• pp.140-145
• /
• 2010

Purpose: The diabetic charcot neuroarthropathy of ankle is an infrequent site (around 5%), but is definitely the location that, because of the instability and progressive deformity it involves, cause ulceration in a high percentage of patients, and this can then become a reason for amputation. However, the treatment of this disastrous disease is still challenging. We analyzed the clinical and radiological results of ankle arthrodesis by our fixation method in Charcot neuroarthropathy. Materials and Methods: Seven cases that were diagnosed as charcot neuroarthropathy of ankle arthrodesis were followed for more than 16 months postoperatively. Mean age was 57 years, and the mean follow-up period was 27 months. Anterior approach was used in arthrodesis, and internal fixation by 3 or more cannulated screws and hybrid type external fixation were used. Auto iliac bone for grafting was combined in all cases. External fixator was kept for 3 months without weight-bearing. Then, boots brace was applied for more 3 months allowing partial weight-bearing. Four cases had minor complications such as pin site infection. Preoperative and postoperative AOFAS score, time to fusion and postoperative complications were checked. Results: Postoperative fusion was completed in all cases, and the mean time to fusion was 3.4 months. No postoperative complication was checked. At the last follow-up, the mean AOFAS score had increased from 54 points to 72 points. Patient's satisfaction was over 80%. Conclusion: Satisfactory results were obtained after ankle arthrodesis using internal and hybrid type external fixation combined with auto iliac bone graft in charcot neuroarthropathy with minor complications.

• Preventive Nutrition and Food Science
• /
• 제7권4호
• /
• pp.397-404
• /
• 2002

Soybean curd residue (SCR) was fermented by lactic acid bacteria, Lactobacillus rhamnosus LS and Entercoccus faecium LL, isolated from SCR. The pH, titratable acidify and viable cell counts were determined from the fermented SCR to evaluate the lactic acid production and growth of lactic acid bacteria. Optimal amounts of pretense enzyme and glucose, and ideal fermentation time for SCR fermentation were estimated by response surface methodology (RSM). Raw SCR fermented by indigenous microorganisms had 0.78 % titratable acidity, The acid production in SCR fermented by L. rhamnosus LS was greatly enhanced by the addition of glucose and lactose. However only glucose increased acid production by Ent. faecium LL. The proof test of SCR fermentation demonstrated that similar results for titratable acidity, tyrosine content and viable cell counts to that predicted could be obtained by the at optimized fermentation conditions. In the presence of 0.029 % (w/w) pretense enzyme and 0.9% (w/w) glucose, the SCR fermented by Ent. faecium LL showed 1.07% (w/v) of titratable acidity, 1.02 mg% tyrosine content and 2$\times$10$^{9}$ (cfu/g) of viable cell counts. With the SCR fortified with 0.033% pretense enzyme and 1.7% glucose, L. rhamnosus LS showed 1.8% (w/v) of titratable acidity, 0.92 mg% of tyrosine content and 2$\times$10$^{9}$ (cfu/g) of viable cell counts.