• 제목/요약/키워드: Pilot control

검색결과 934건 처리시간 0.026초

온칩 다이오드를 이용한 빛에너지 하베스팅 회로 설계 (Design of a Photo Energy Harvesting Circuit Using On-chip Diodes)

  • 윤은정;황인호;박준호;박종태;유종근
    • 한국정보통신학회논문지
    • /
    • 제16권3호
    • /
    • pp.549-557
    • /
    • 2012
  • 본 논문에서는 CMOS 공정의 p-diff/n-well 다이오드만을 사용한 ISC(Integrated Solar Cell)를 이용하여 MPPT(Maximum Power Point Tracking) 제어 기능을 갖는 온칩 빛에너지 하베스팅 시스템을 제안하였다. MPPT 제어는 PV(Photovoltaic) 셀의 개방전압과 MPP(Maximum Power Point) 전압간의 비례관계를 이용하여, 작은 pilot PV 셀로 하여금 main PV 셀의 MPP를 실시간 추적할 수 있도록 설계하였다. 모의실험 결과 설계된 회로는 MPPT 제어기능을 적용했을 때 부하가 큰 경우에도 MPP 근처의 전압을 부하에 공급함으로써 부하에 연결된 회로가 정상적으로 동작하는 것을 확인하였다. 제안된 회로는 0.18um CMOS 공정으로 설계하였으며, main PV 셀과 pilot PV 셀의 면적은 각각 $8mm^2$$0.4mm^2$이다.

PHC 파일 시공성능향상을 위한 연직 자동제어 파일롯타입의 개발 (Development of the Automated Vertical Controllable Pilot-type Equipment for Improving Construction Performance of PHC Piles)

  • 조창연;이준복;김한수;김정태;조문영
    • 한국건설관리학회논문집
    • /
    • 제5권2호
    • /
    • pp.72-80
    • /
    • 2004
  • 대부분의 $건축\cdot토목공사$의 기초공사 시 사용하는 기성콘크리트 파일공사의 굴착 및 파일 매입 작업의 경우 국내 시방기준에는 파일을 연직으로 시공해야 한다는 것만이 명시되어 있을 뿐, 이에 대한 측정기준 및 시공기준이 제시되어 있지 않으며, 대부분의 시공현장에서는 숙련노무자의 경험을 통한 육안측정에 의존하고 있는 실정이다. 본 연구의 목적은 파일공사시 균일한 품질을 확보하고 작업의 안전성 확보 및 생산성 향상을 위한 파일 연직 자동제어를 위한 파일롯타입을 개발하는 것이다. 연구목적을 만족시키기 위하여 수행한 주요 연구내용으로 국내 시방기준 및 현장 조사를 통하여 파일 공사에서의 연직도 측정 및 제어 현황을 파악하고, 이를 토대로 파일공사시 연직도 측정 및 제어작업을 효율적으로 수행할 수 있도록 파일드라이버 장비의 기능 향상을 위한 장비의 개념설계를 실시하고, 파일롯타입 장비를 제작하여 성능실험을 실시하고 연직 자동제어 장비 프로토타입 개발을 위한 기초 자료를 제시한다.

Maxillary sinus volumetric changes in jet aircraft pilots: A multislice computed tomography pilot study

  • Yeda da Silva;Luciana Munhoz;Jose Rodrigues Parga Filho;Andreza Gomes Damasceno;Cesar Felipe Franca da Rosa;Eduardo Bilaqui Zukovski;Erik Zhu Teng;Claudio Campi de Castro
    • Imaging Science in Dentistry
    • /
    • 제53권1호
    • /
    • pp.53-60
    • /
    • 2023
  • Purpose: This study evaluated maxillary sinus volume changes in military jet aircraft pilot candidates before and after the training program, in comparison with a control group, considering the effects of pressurization, altitude, and total flight hours, through multislice computed tomography. Materials and Methods: Fifteen fighter pilots were evaluated before initiating the training program and after the final approval. The control group consisted of 41 young adults who had not flown during their military career. The volumes of each maxillary sinus were measured individually before and at the end of the training program. Results: When comparing the initial and final volumes in the pilots, a statistically significant increase was observed both in the left and right maxillary sinuses. When evaluating the average total volume of the maxillary sinuses(i.e., the average volume of the right and left maxillary sinuses together), a significant increase in the volume of the maxillary sinuses was observed in the pilot group when compared to the control group. Conclusion: The maxillary sinus volumes in aircraft pilot candidates increased after the 8-month training program. This may be explained by changes in the gravitational force, the expansion of gas, and positive pressure from oxygen masks. This unprecedented investigation among pilots might lead to other investigations considering paranasal sinus alterations in this singular population.

전환제어법칙 설계 및 검증에 관한 연구 (A Study on the Design and Validation of Switching Control Law)

  • 김종섭
    • 제어로봇시스템학회논문지
    • /
    • 제17권1호
    • /
    • pp.54-60
    • /
    • 2011
  • The flight control law designed for prototype aircraft often leads to degraded stability and performance, although developed control law verify by non-real time simulation and pilot based evaluations. Therefore, the proper evaluation methods should be applied such that flight control law designed can be verified in real flight environment. The one proposed in this paper is IFS (In-Flight Simulator). Currently, this system has been implemented into the F-18 HARV (High Angle of Attack Research Vehicle), SU-27 and F-16 VISTA (Variable stability In flight Simulation Test Aircraft) programs. The IFS necessary switching control law such as fader logic and integrator stand-by mode to reduce abrupt transient and minimize the integrator effect for each flight control laws switching. This paper addresses the concept of switching mechanism with fader logic of "TFS (Transient Free Switch)" and stand-by mode of "feedback type" based on SSWM (Software Switching Mechanism). And the result of real-time pilot evaluation reveals that the aircraft is stable for inter-conversion of flight control laws and transient response is minimized.

무인항공기의 각속도 기반 자동비행제어시스템 개발

  • 이장호;유혁;김재은;안이기;김응태
    • 항공우주기술
    • /
    • 제4권2호
    • /
    • pp.7-14
    • /
    • 2005
  • 본 논문은 군에서 운용중인 대공포 사격 훈련용으로 개발한 무인 표적기용 자동비행시스템 개발에 관한 논문이다. 조종사에 의해 수동으로 운용중인 표적기를 자동화함으로써 조종사 측면에서는 비행업무를 경감시키고, 군 측면에서는 사격훈련 예산절감이라는 장점을 가지게 된다. 현재까지 개발된 대부분의 UAV(Unmanned Aerial Vehicle)는 항공기 자세를 측정하기 위해 AHRS(Attitude & Heading Reference System)와 IMU(Inertial Measurement Unit)등의 고가의 센서를 장착하고 있지만 이를 장착하고 무인기를 사격훈련용으로 사용하기에는 비용절감이라는 목적에 적합하지 않다. 이에 본 논문은 저가의 센서를 장착하고 자동비행이 가능하도록 저가형 자동비행시스템을 개발하였으며, 비행시험을 통하여 자동비행시스템 성능을 입증하였다.

  • PDF

실내 환경의 Mobile WiMAX 시스템을 위한 간섭 완화 기술에 대한 연구 (Interference Reduction Scheme for Mobile WiMAX in an Indoor environment)

  • 오용일;하광준;구성완;김진영
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2008년도 정보통신설비 학술대회
    • /
    • pp.454-458
    • /
    • 2008
  • This article describes an interference reduction scheme for Mobile WiMAX in an indoor environment. The feasibility of user deployed femtocells in the same frequency channel as an existing macro cell network is investigated. One of the important requirements for co-channel operation of femtocells such as auto-configuration and self optimization are discussed. In femtocell deployments, leakage of the pilot signal to the outside of a house can result of the higher number of mobility events caused by passing user of macrocell. This interference effect can be minimized by reducing the pilot power using proper scheme. This paper introduces existing auto-configuration method of power control and proposed interference reduction scheme using power control for Mobile WiMAX in an indoor environment.

  • PDF

발전소 증기터빈 밸브제어에 관한 고찰 (A Study On Steam Turbine Valve Controls In Power Plant)

  • 최인규;정창기;김병철;김종안;우주희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
    • /
    • pp.2640-2642
    • /
    • 2005
  • Servovalves are widely used in industrial areas in order to control the position of large steam valves which regulate steam flow to prime mover. We must control the position of large steam valves to regulate flow of working fluids in the process. The small pilot valves are used to regulate the large main valves in case that the pressure of control fluids supplied to servovalves is low about $12kg/cm^2$. But, in case that the pressure of control fluids supplied to servovalves is high enough about $110kg/cm^2$, the pilot valves are not needed and servovalves can control directly the large main valves due to its large working forces. Additionally, the basic structures of armature coil should be different according to the types of control system even in the same servovalve. This paper compares and describes some integral types of flow control.

  • PDF

Development of a Biofungicide Using a Mycoparasitic Fungus Simplicillium lamellicola BCP and Its Control Efficacy against Gray Mold Diseases of Tomato and Ginseng

  • Shin, Teak Soo;Yu, Nan Hee;Lee, Jaeho;Choi, Gyung Ja;Kim, Jin-Cheol;Shin, Chul Soo
    • The Plant Pathology Journal
    • /
    • 제33권3호
    • /
    • pp.337-344
    • /
    • 2017
  • To develop a commercial product using the mycoparasitic fungus Simplicillium lamellicola BCP, the scale-up of conidia production from a 5-l jar to a 5,000-l pilot bioreactor, optimization of the freeze-drying of the fermentation broth, and preparation of a wettable powder-type formulation were performed. Then, its disease control efficacy was evaluated against gray mold diseases of tomato and ginseng plants in field conditions. The final conidial yields of S. lamellicola BCP were $3.3{\times}10^9conidia/ml$ for a 5-l jar, $3.5{\times}10^9conidia/ml$ for a 500-l pilot vessel, and $3.1{\times}10^9conidia/ml$ for a 5,000-l pilot bioreactor. The conidial yield in the 5,000-l pilot bioreactor was comparable to that in the 5-l jar and 500-l pilot vessel. On the other hand, the highest conidial viability of 86% was obtained by the freeze-drying method using an additive combination of lactose, trehalose, soybean meal, and glycerin. Using the freeze-dried sample, a wettable powder-type formulation (active ingredient 10%; BCP-WP10) was prepared. A conidial viability of more than 50% was maintained in BCP-WP10 until 22 weeks for storage at $40^{\circ}C$. BCP-WP10 effectively suppressed the development of gray mold disease on tomato with control efficacies of 64.7% and 82.6% at 500- and 250-fold dilutions, respectively. It also reduced the incidence of gray mold on ginseng by 65.6% and 81.3% at 500- and 250-fold dilutions, respectively. The results indicated that the new microbial fungicide BCP-WP10 can be used widely to control gray mold diseases of various crops including tomato and ginseng.

다중 사용자 환경에서 역방향 링크 동기식 DS-CDMA 시스템의 성능에 관한 연구 (A Study on Performance of Reverse Link Synchronous DS-CDMA System in Multiuser Environment)

  • 강성진;박진홍;강병권;김선형
    • 융합신호처리학회 학술대회논문집
    • /
    • 한국신호처리시스템학회 2000년도 하계종합학술대회논문집
    • /
    • pp.61-64
    • /
    • 2000
  • 본 논문에서는 cdma2000 규격을 채용한 역방향 링크 동기식 DS-CDMA 시스템을 시뮬레이션 하여 시스템의 성능을 분석하려다 cdma2000 시스템은 기존의 IS-95와는 달리 Pilot 채널을 이용하여 페이딩 채널을 추정하고 이를 이용하여 채널 환경에 의한 수신신호의 위상변화를 보상해 준다. 채널 추정필이 31pcg 심볼에서 Pilot 채널과 Traffic 채널의 최적의 전력비를 구하였다. 또한 시스템에 Power Control을 적용하여 Target FER을 만족시키기 위한 required Eb/No를 구하였고, 서로 다른 데이터율의 사용자가 동시에 전송할 때의 성능을 분석하였다.

  • PDF