• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.6
• /
• pp.332-342
• /
• 2019

Objectives: Socket grafting is vital to prevent bone resorption after tooth extraction. Several techniques to prevent resorption have been described, and various bone graft substitutes have been developed and used with varying success. We conducted this pilot study to evaluate the performance of nanohydroxyapatite (nHA) derived from chicken eggshells in socket preservation. Materials and Methods: This was a prospective, single center, outcome assessor-blinded evaluation of 23 sockets (11 patients) grafted with nHA and covered with platelet-rich fibrin (PRF) membrane as a barrier. Bone width and radiographic bone density were measured using digital radiographs at 1, 12, and 24 weeks post-procedure. Postoperative histomorphometric and micro-computed tomography (CT) evaluation were performed. The study protocol was approved by the Institutional Ethics Committee. Results: All patients had uneventful wound healing without graft material displacement or leaching despite partial exposure of the grafted socket. Tissue re-epithelialized with thick gingival biotype (>3 mm). Width of the bone was maintained and radiographic density increased significantly with a trabecular pattern (73.91% of sockets) within 12 weeks. Histomorphometric analysis showed 56.52% Grade 3 bone formation and micro-CT analysis revealed newly formed bone with interconnecting trabeculae. Conclusion: Use of a PRF membrane with nHA resulted in good bone regeneration in sockets. Use of a PRF membrane prevents periosteal-releasing incisions for primary closure, thereby facilitating the preservation of keratinized mucosa and gingival architecture. This technique, which uses eggshell-derived nHA and PRF membrane from the patient's own blood, is innovative and is free of disease transfer risks. nHA is a promising economic bone graft substitute for bone regeneration and reconstruction because of the abundant availability of eggshell waste as a raw material.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.22 no.4
• /
• pp.211-218
• /
• 2011

Objectives : Intellectual impairment in children with attention-deficit hyperactivity disorder (ADHD) is often associated with relatively severe cognitive dysfunction. This study was designed to investigate cognitive function using auditory and visual event-related potential P300 in children with ADHD with relatively higher and lower IQ. Methods : A total of 20 children aged 6-12 years with DSM-IV-TR diagnosis of ADHD-combined type were recruited. For 10 children with lower IQ (${\leq}$100) and 10 children with higher IQ (>100), auditory and visual P300 using oddball paradigm (target 0.2, standard 0.8, in probability) were employed. Results : No significant differences were found in P300 amplitude and latency between ADHD children with higher and lower IQ in both modalities. However, auditory P300 amplitude in the right parietal area (P8 electrode) was negatively correlated with verbal IQ in ADHD subjects (R=-.50, p<.05). Visual P300 amplitude in the left parietal area (P3 electrode) was positively correlated with performance IQ in ADHD subjects (R=.57, p<.01). Conclusion : This study suggests intellectual impairment, as evidenced by lower IQ, could not be associated with cognitive dysfunction reflected in event-related potential P300 in ADHD children. However, cognitive function reflected in intellectual subcomponents and P300 might be processed in a stimulus modality-specific and asymmetric pattern.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.289-294
• /
• 2014

In this paper, we investigate the user scheduling, transmit beamforming, and receive beamforming of uplink space division multiple access (SDMA) systems where multiple users are allowed to transmit their signal to a base station (BS) using the same frequency band simultaneously. The BS performs a receive beamforming using the predetermined pseudo-random pattern and select users with a specific criterion. Especially, in this paper, we propose the threshold-based transmit power control, in which a user decrease its transmit power according if its generating interference to other users's signal is larger than a predetermined threshold. Assuming that the TDD system is used, the channel state information (CSI) can be obtained at each user from pilot signals from the BS. Simulation results show that the proposed technique significantly outperforms the existing user scheduling algorithms.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.4002-4014
• /
• 2015

ITU-R M.1842-1, as a well-known specification dedicated to maritime mobile applications, has standardized wireless transmission protocols according to the particular characteristics of a maritime communications scenario. A time division multiple access (TDMA) frame structure, along with modulation schemes to achieve a high data rate, has been described clearly in ITU-R M.1842-1. However, several specification items are still under "to be decided" status, which brings ambiguity to research works. In addition, the current version of ITU-R M.1842-1 is focused mainly on maritime transmissions in open-sea areas, where the cyclic prefix (CP) is set to zero and only 16-QAM is used in the multi-carrier (MC) system. System performance might be dramatically degraded in coastline areas due to the inter-symbol interference (ISI) caused by selective fading. This is because there is a higher probability that the signal will be reflected by obstacles in coastline areas. In this paper, we introduce the transmission resource block (TRB) dedicated to ITU-R M.1842-1 for a ship ad-hoc network (SANET), where the pilot pattern of TRB is based on the terrestrial trunked radio (TETRA). After that, we evaluated SANET performance under the maritime channel model in a coastline area. In order to avoid noise amplification and to overcome the ISI caused by selective fading, several strategies are suggested and compared in the channel estimation and equalization procedures, where the link-level simulation results finally validate our proposals.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.98-104
• /
• 2004

When a straight-in landing from an instrument approach using ILS or VOR/DME is not possible or desirable because of topographical reason or bad weather, a circling approach maneuver is initiated by the pilot to align the aircraft with a runway for landing. Visual contact with the runway is necessary while conducting a circle to land maneuver. This research is to develop a new warning system based on a convention marker system which alerts pilots to watch out for exceeding the circling approach area. The airborne system also uses the same receiver unit without any new installations. The objective of this research is to design and develop a Yagi antenna in a special form. The research includes computer simulations to determine the size of antenna radiation pattern and to compute an expected flight path in case of alarm to validate effectiveness of the system.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.4
• /
• pp.191-204
• /
• 2021

PURPOSE. The purpose of this study is to present a methodology to evaluate the accuracy of intraoral scanners (IOS) used in vivo. MATERIALS AND METHODS. A specific feature-based gauge was designed, manufactured, and measured in a coordinate measuring machine (CMM), obtaining reference distances and angles. Then, 10 scans were taken by an IOS with the gauge in the patient's mouth and from the obtained stereolithography (STL) files, a total of 40 distances and 150 angles were measured and compared with the gauge's reference values. In order to provide a comparison, there were defined distance and angle groups in accordance with the increasing scanning area: from a short span area to a complete-arch scanning extension. Data was analyzed using software for statistical analysis. RESULTS. Deviations in measured distances showed that accuracy worsened as the scanning area increased: trueness varied from 0.018 ± 0.021 mm in a distance equivalent to the space spanning a four-unit bridge to 0.106 ± 0.08 mm in a space equivalent to a complete arch. Precision ranged from 0.015 ± 0.03 mm to 0.077 ± 0.073 mm in the same two areas. When analyzing angles, deviations did not show such a worsening pattern. In addition, deviations in angle measurement values were low and there were no calculated significant differences among angle groups. CONCLUSION. Currently, there is no standardized procedure to assess the accuracy of IOS in vivo, and the results show that the proposed methodology can contribute to this purpose. The deviations measured in the study show a worsening accuracy when increasing the length of the scanning area.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.419-419
• /
• 2021

수자원 관리 패러다임은 공급 위주에서 수요관리로 전환되고 있다. 가용한 수자원은 한정적이나 급속한 인구증가와 도시화로 인한 물 수요의 증가로 수요관리의 효율성이 중시되고 있기 때문이다. 기존 상수도시스템은 노후화로 가동효율이 점차 낮아지고 있으며, 인력으로 월 또는 격월로 소비자의 물 사용량을 검침해 실시간 관리가 불가능하여 수요와 공급의 불균형을 초래한다. 이러한 문제를 해결할 대안으로 IT 기술과 전통적인 물관리 기술을 접목한 Smart Water Grid는 양방향 통신장치를 이용해 실시간으로 소비자의 물 사용량을 모니터링한다. 물 사용 특성을 잘 파악하면 보다 정확한 물 수요 예측이 가능하다. 특히 소비자들의 시간별, 평일, 주말, 그리고 주별 물 사용 특성을 파악하면 미래 물 수요 예측에 도움이 된다. 예측된 물 수요량에 따라 물 공급 배분 계획을 수립하여 운영 효율성을 높일 수 있다. 물 수요예측 방법 중 k-mean 군집분석은 시간별 물 사용량을 이용해 서로 유사한 여러 개의 부분집합으로 할당하여 분류하는 Machine learing 방법으로 물 사용의 유사성을 파악할 수 있다. SWG 연구단은 2019년 Vietnam Hai Duong province에 SWG Pilot plant를 구축하고 27개의 Smart water meter를 설치하여 운영하고 있다. 이에 본 연구에서는 소비자의 물 사용 특성을 분석하기 위해 27개 SWM로부터 수신된 2019년 11월 14일부터 2020년 12월 3일까지 1시간 단위의 물 사용량 데이터를 수집하였다. 그리고 k-mean 군집 방법을 이용해 시간별, 평일, 주말, 그리고 주별 물 사용 특성을 분석하였다. 이 때 최적의 군집 개수 결정을 위해 Elbow 방법을 적용하였다. 분석 결과 각 소비자의 물 사용량 특성에 따라 평균 물 수요패턴 추정이 가능하며, 향후 물 수요 예측에 도움이 될 것으로 사료된다.

• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.41-50
• /
• 2014

The purpose of this study is to evaluate the High Rate Spiral Clarifier(HRSC) availability for the improvement of polluted retention pond water quality. A lab scale and a pilot scale test was performed for this. The fluid flow patterns in a HRSC were studied using Fluent which is one of the computational fluid dynamic(CFD) programs, with inlet velocity and inlet diameter, length of body($L_B$) and length of lower cone(Lc), angle and gap between the inverted sloping cone, the lower exit hole installed or not installed. A pilot scale experimental apparatus was made on the basis of the results from the fluid flow analysis and lab scale test, then a field test was executed for the retention pond. In the study of inside fluid flow for the experimental apparatus, we found out that the inlet velocity had a greater effect on forming spiral flow than inlet flow rate and inlet diameter. There was no observable effect on forming spiral flow LB in the range of 1.2 to $1.6D_B$(body diameter) and Lc in the range of 0.35 to $0.5L_B$, but decreased the spiral flow with a high ratio of $L_B/D_B$ 2.0, $Lc/L_B$ 0.75. As increased the angle of the inverted sloping cone, velocity gradually dropped and evenly distributed in the inverted sloping cone. The better condition was a 10cm distance of the inverted sloping cone compared to 20cm to prevent turbulent flow. The condition that excludes the lower exit hole was better to prevent channeling and to distribute effluent flow rate evenly. From the pilot scale field test it was confirmed that particulate matters were effectively removed, therefore, this apparatus could be used for one of the plans to improve water quality for a large water body such as retention ponds.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.67-72
• /
• 2005

To investigate the feasibility of a new concept of storing Liquefied Natural Gas (LNG) in a lined hard rock cavern, and to develop essential technologies for constructing underground LNG storage facilities, a small pilot plant storing liquid nitrogen (LN2) has been constructed at the Korea Institute of Geoscience and Mineral Resources (KIGAM). The LN2 stored in the cavern will subject the host rock around the cavern to very low temperatures, which is expected to cause the development of an ice ring and the change of ground condition around the storage cavern. To investigate and monitor changes in ground conditions at this pilot plant site, geophysical, hydrogeological, and rock mechanical investigations were carried out. In particular, geophysical methods including borehole radar and three-dimensional (3D) resistivity surveys were used to identify and monitor the development of an ice ring, and other possible changes in ground conditions resulting from the very low temperature of LN2 in the storage tank. We acquired 3D resistivity data before and after storing the LN2, and the results were compared. From the 3D images obtained during the three phases of the resistivity monitoring survey, we delineated zones of distinct resistivity changes that are closely related to the storage of LN2. In these results, we observed a decrease in resistivity at the eastern part of the storage cavern. Comparing the hydrogeological data and Joint patterns around the storage cavern, we interpret this change in resistivity to result from changes in the groundwater flow pattern. Freezing of the host rock by the very low temperature of LN2 causes a drastic change in the hydrogeological conditions and groundwater flow patterns in this pilot plant.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.2
• /
• pp.95-103
• /
• 2015

In this study, the causes and countermeasures for the leakage of a sea dyke under construction are analyzed. In general, the seabed ground is clearly divided from the embankment but a lot of parts show abnormal zones with low resistivity from the results of electric resistivity survey. Hence the causes of the leakage are considered as following: three-dimensional shear strain behavior, irregular compulsory replacement of the soft seabed ground with low strength and quality deterioration of the waterproof sheets during the closing process. The improvement method is determined by considering the constructability in the seawater and its velocity condition, durability, economic feasibility, similar application cases and so on. Consequently, a combination of low slump mortar and slurry grouting and injection method is selected as an optimum combination. Mixing ratio and improvement pattern are determined after drilling investigation and pilot test. The improvement boundary is separated into general and intense leakage area. The construction is performed with each pattern and the improvement effects are confirmed. The confirmed effects with various tests after completion show tolerable ranges for all of the established standards. Finally, various issues such as prediction of length of the waterproof sheet, installation of it against seawater velocity, etc. should be considered when sea dykes are designed or executed around the western sea which has high tide difference.