• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.660-666
• /
• 2004

Transmitted data may be compensated by using estimated channel values that are obtained with pilot symbols in OFDM-CDMA systems. Generally, a USE (Minimum Mean-Squared Error) estimator using correlations between pilot symbols gives good results, but its structure is so complicated. Starting with a modification of PA (Pilot-Aided) algorithm using pilot symbols and PADD (Pilot-Aided Decision-Directed) algorithm using both pilot and data symbols, a new channel estimation algorithm with more simpler structure is proposed. The performance of this algorithm is evaluated with varying mobile speed in a Ralyleigh multipath fading environment through computer simulations. The simulation results show that the proposed channel estimation algorithm outperforms a conventional PA algorithm.

• The Korean Journal of Air & Space Law and Policy
• /
• v.20 no.2
• /
• pp.253-276
• /
• 2005

A pilot logbook is an essential data for proving pilot's flight experience. the reason for maintaining this information is to fulfill the requirement for pilot certificates, manage internationally shared career placement. this study focuses on the instrument flight related items among other flight time items which are included in a pilot logbook. By comparing the way of flight time logging among Korean Aviation Law, Federal Aviation Regulation and Joint Aviation Requirements, this study concludes intensively how to define items for flight time, to amend the definition and to apply the policy in Korea with respect to the pilot logbook.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.251-256
• /
• 2003

The capability of pilot injection with small fuel quantity at all engine operating conditions is one of the main feature of the common rail system. The purpose of the pilot injection is to lower the engine noise and to reduce the NOx emissions. This study describes the pilot spray structure characteristics of the common-rail diesel injectors, solenoid-driven and piezo-driven type, with different electric driving characteristics So, three common-rail injectors with different electric current wave were used in this study. The pilot spray characteristics such as spray speed, spray tip penetration, and spray angle were obtained by spray images, which is measured by the back diffusion light illumination method with optical system for high-speed temporal photography. Also the CFD analysis was carried out for fuel behavior under high pressure in between needle and nozzle of solenoid-driven injector to know the condition of initial injection at experiment test. It was found that pilot injection of common-rail system was effected by rate of injection and temperature of injected fuel and electrical characteristic of the driven injector.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.76-82
• /
• 2007

This paper described the effect of the multiple injections on the stability of combustion and emission characteristics in a direct injection diesel engine at various operating conditions. In order to investigate the influence of multiple injections in a diesel engine, the fuel injection timing was varied one main injection and two pilot injections at various conditions. The experimental apparatus consisted of DI diesel engine with four cylinders, EC dynamometer, multi-stage injection control system, and exhaust emissions analyzer. The combustion and emission characteristics were analyzed for the main, pilot-main injection, pilot-pilot-main injection strategies. It is revealed that the combustion pressure was smoothly near the top dead center and the coefficient of variations is reduced due to the effect of pilot injection. Also, $NO_x$ emissions are dramatically decreased with pilot injection because the decrease of rate of heat release. However, the soot is increased at early pilot injection and main injection.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1125-1132
• /
• 2009

The theory and a probe of the pilot hole wall deformation method, which is a 3-dimensional stress measurement method based on the stress relief principle, were developed. A pilot hole is drilled from the bottom of a borehole and the stress measurement probe is inserted into the pilot hole. The borehole is advanced as the overcoring and the changes in the radius of the pilot hole in three directions and in the axial lengths between the borehole bottom and the pilot hole wall along four axial lines are measured by cantilever type-displacement sensors. The differences between the displacements by the elastic stress analysis and those measured by using the probe were within 3% in the uniaxial compression test of an acrylic resin plate having a hole.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.1
• /
• pp.44-49
• /
• 2022

This study performed precision instrument landing procedures for pilots with a commercial pilot license using VR HMD flight simulators, and assuming that the center of the pilot's gaze is in the front, 3-D.O.F. head tracking data and 2-D eye tracking of VR HMD worn by pilots gaze tracking was performed through. After that, AOI (Area of Interesting) was set for the instrument panel and external field of view of the cockpit to analyze how the pilot's gaze was distributed before and after the decision altitude. At the same time, the landing results were analyzed using the Localizer and G/S data as the pilot's precision instrument landing flight data. As a result, the pilot was quantitatively evaluated by reflecting the gaze tracking and the resulting landing result using a VR HMD simulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7A
• /
• pp.1022-1027
• /
• 1999

This paper proposes method that uses Time-Difference-of-Arrival(TDOA) of Forward Pilot signals from base stations(BS) arriving at a mobile station(MS) as a position location method of CDMA MS. MS searcher does acquisition of BS Pilot signals and measurement of TDOAs. In order to do it, its processing gain is very important. Proportional relationship of the gain to the signal coherent integration interval is theoretically derived and analyzed and field test is performed to show acquisition of weak Pilot signals and stable measurements of TDOA values by increasing the gain. Also, signal strength decrease exponentially by the distance it travels. Therefore, improvement of the searcher gain makes possible to acquire Pilot signals at a location far away from BS. Variation of possible position estimation area relative to the signal strength within a cell is simulated with computer. Neglecting shadow effect it indicated necessity of detecting signals below -35dB in order to cover over 90% of cell area. Thus, efforts to maximize searcher coherent integration interval in order to acquire weak Pilot signals are required for expansion of position estimation area and measurement of stable TDOA values.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.162-166
• /
• 2023

This study is a pilot operation roadmap for the introduction of the co-pilot qualification (MPL) system, and the introduction of the MPL system in Korea is a new pilot education and qualification system based on competency. Therefore, it may be difficult to prepare for various matters such as securing initial regulations, securing training businesses or trainees, and establishing training infrastructure, so the roadmap necessary for pilot operation is very important for the successful introduction of the MPL system. In order to secure a training program and qualification system with proven MPL systems in the domestic aviation market, the government and aviation industry members will jointly participate to highlight the importance of a pilot operation roadmap for the domestic flight environment.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.2
• /
• pp.63-71
• /
• 2005

There is a concern in the aviation community that pilot schedules can lead to fatigue and increased chance of an aviation accident. Yet despite this concern, there is little empirical studies showing the relationship between pilot fatigue and commercial aviation accidents. At this point of view, countering fatigue is a challenging proposition in complex aviation operations. However, with appropriate planning, many strategies can contribute to pilot alertness and flight safety. With proper education program, sustaining a physiological fit, a right knowledge about pilot fatigue can design a safety operations. On this study, I inquire into the ways of enhancing pilot's efficiency from fatigue.

• Journal of the Ergonomics Society of Korea
• /
• v.15 no.2
• /
• pp.99-111
• /
• 1996

In today's highly automated aircraft, the role of the pilot has changed from an airplane controller to a system manager. As a system manager in a cockpit, today's pilot is in charge of a management-level activity called cockpit task management( CTM). According to earlier studies, pilot errors in performing CTM activities were significant factors in a large number of aircraft accidents and incidents. The primary objective of this research was to reduce CTM-related pilot errors. A prototype pilot- vehicle interface called the cockpit task management system (CTMS) was developed and its effectiveness in improving CTM performance was evaluated. After the CTMS was implemented, it was integrated into a PC-based flight simulator to perform an experiment to evaluate its effectiveness. Eight volunteer subjects were used to collect performance data. The results of the experiment indicated that a statistically significant improvement was observed when the subjects flew with the assistance of the CTMS.