• 마이크로전자및패키징학회지
• /
• 제26권4호
• /
• pp.63-68
• /
• 2019

온도 및 압축응력 변화에 따른 PIN-PMN-PT계 압전 단결정의 유전 특성과 압전 특성을 조사하였다. 단결정의 결정상은 110℃ 영역에서 강유전 rhombohedral 구조에서 tetragonal 구조로, 190℃ 영역에서 tetragonal 구조로부터 상유전 cubic 구조로 변화하였다. 전계 인가에 따른 분극 및 변위의 변화율로부터 압전상수와 비유전율을 계산하였으며, 이는 계측기로부터 측정된 값과 유사한 수준을 나타내었다. 샘플에 인가되는 압축응력이 증가할수록 압전상수 d₃₃과 비유전율값은 증가하는 경향성을 나타내었다. 측정 온도 5℃에서 샘플에 인가되는 압축응력이 60 MPa인 경우 d₃₃ 값이 4500 pC/N로 계산되었으며, 측정 온도 60℃인 경우, 샘플에 인가되는 압축응력이 40 MPa 일 때 비유전율 62000이 계산되었다. 압축응력이 높아질 때 압전상수와 비유전율 값이 상승한 것은 rhombohedral 상에서 orthorhombic 상으로의 전이에 기인한 것으로 판단된다.

• 한국결정성장학회지
• /
• 제11권4호
• /
• pp.148-153
• /
• 2001

새로운 압전체인 $Ca_{3}NbGa_{3}Si_{2}O_{14}$(CNGS) 단결정은 Czochralski 법을 사용하여 결정성장을 이루었다. CNGS의 결정 구조는 $A_{3}BC_{3}D_{2}O_{14}$와 동방구조를 이루고 있음이 조사되어졌고, 단위 셀의 격자상수는 각각 a = 8.0873과 c = 4.979이었으며, 공간군은 P321이었다. 각각의 양이온의 분포는 각 자리에 규칙배멸을 이루고 있음을 보였다. CNGS 결정은 Langasite 보다 높은 품질계수, 전기기계결합계수, 압전성수를 나타내었으며, 이는 Langasite와 비교하여 낮은 탄성손실과 우수한 압전특성을 가짐을 보여주고 있다.

• The Journal of the Acoustical Society of Korea
• /
• 제13권1E호
• /
• pp.45-54
• /
• 1994

탄성표면파 소자용 압전재료의 특성을 평가하여 최적 절단명과 전파방형을 결정하였다. 압전단결정 $LiTaO_4$에 대하여 Rayleigh파의 속도, 결합계수, 표면유전상수, 주파수-온도계수, 감쇠계수, 퓨어모드 전하, 빔 산란, 그리고 정열오차 감도 등의 항목들을 평가하였다. 이론적 계산 결과 Y절단면상의 X축 방향이 최적치로 나타났고, 이결과는 시럼에 의해 확인되었다. 본 논문의 평가방법은 여타 다른 압전재료들에도 동일하게 적용이 가능하다.

• 한국전기전자재료학회논문지
• /
• 제14권11호
• /
• pp.892-897
• /
• 2001

Variations of dielectric and piezoelectric properties and associated phase transformation of <001> -oriented rhombohedral 0.92Pb (Zn$\sub$1/3/Nb$\sub$2/3/)O$_3$-0.08PbTiO$_3$ single crystals were investigated. The longitudinal strain level was found to abruptly increase at 15 kV/cm, corresponding to that where an induced phase appears within a multidomain matrix. Drastic decreases in the dielectric constant, transverse coupling, and transverse piezoelectric coefficient associated with the E-field induced phase were the result of increased crystal anisotropy in PZN-PT crystals. By contrast, the thickness coupling increased from 53 % at 0 kV/cm to 64 % at 45 kV/cm, also associated with this phase transition under the E-field. The measured dielectric and piezflelectric properties found for the induced phase state were nearly identical to those of <001> poled tetragonal (1-x)PZN-xPT (x>0.1) crystals. Based on these results, it is evident that the symmetry of induced phase is tetragonal.

• 한국세라믹학회지
• /
• 제39권9호
• /
• pp.813-817
• /
• 2002

Magnetoelectric(ME) laminate composites of $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3 (PMN-PT)$ and Terfenol-D were prepared by sandwiching single crystals of PMN-PT between Terfenol-D disks. The magnetoelectric voltage coefficient (dE/dH) of the composite was determined to be 10.30 V/cm${\cdot}$Oe, at 1 kHz and under a dc magnetic bias of 0.4 T. The value of dE/dH is ∼80 times higher than either that of naturally occurring magnetoelectrics or artificially-grown magnetoelectric composites. This superior magnetoelectric voltage coefficient is attributed to the high piezoelectric voltage constant as well as the high elastic compliance of PMN-PT single crystal and the large magnetostrictive response of Terfenol-D.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.419-439
• /
• 2018

Piezoelectric materials are essential parts of the electronics and electrical equipment used for consumer and industrial applications, such as ultrasonic piezoelectric transducers, sensors, actuators, transformers, and resonators. In this review, the development of piezoelectric materials and the figures of merit for various electromechanical applications are surveyed, focusing on piezoelectric crystals, i.e., the high-performance relaxor-$PbTiO_3$-based perovskite ferroelectric crystals and nonferroelectric high-temperature piezoelectric crystals. The uniqueness of these crystals is discussed with respect to different usages. Finally, the existing challenges and perspective for the piezoelectric crystals are discussed, with an emphasis on the temperature-dependent properties, from cryogenic temperatures up to the ultrahigh-temperature usage range.

• 한국세라믹학회지
• /
• 제51권6호
• /
• pp.623-628
• /
• 2014

Orthorhombic $Ba(Ti_{0.94}Zr_{0.06})O_3$ single crystals are fabricated using the cost-effective solid-state single crystal growth (SSCG) method; their dielectric and piezoelectric properties are also characterized. Measurements show that (001) $Ba(Ti_{0.94}Zr_{0.06})O_3$ single crystals have an electromechanical coupling factor ($k_{33}$) higher than 0.83, piezoelectric charge constant ($d_{33}$) of about 400 [pC/N], and piezoelectric voltage constant ($g_{33}$) higher than 50 [${\times}10^{-3}Vm/N$]. The transition temperature ($T_{OT}$) of the (001) $Ba(Ti_{0.94}Zr_{0.06})O_3$ single crystals between orthorhombic and tetragonal phases is also observed to be about $61^{\circ}C$. Because their electromechanical coupling factor ($k_{33}$) and piezoelectric voltage constant ($g_{33}$) are higher than those of soft PZT ceramics, it is expected that (001) $Ba(Ti_{0.94}Zr_{0.06})O_3$ single crystals can be used as "lead-free" piezoelectric materials in many piezoelectric applications.

• ETRI Journal
• /
• 제31권6호
• /
• pp.688-694
• /
• 2009

In this paper, we present the results of a preliminary study on the piezoelectric energy harvesting performance of a Zr-doped $PbMg_{1/3}Nb_{2/3}O_3-PbTiO_3$ (PMN-PZT) single crystal beam. A novel piezoelectric beam cantilever structure is used to demonstrate the feasibility of generating AC voltage during a state of vibration. The energy-harvesting capability of a PMN-PZT beam is calculated and tested. The frequency response of the cantilever device shows that the first mode resonance frequency of the excitation model exists in the neighborhood of several hundreds of hertz, which is similar to the calculated value. These tests show that several significantly open AC voltages and sub-mW power are achieved. To test the possibility of a small scale power source for a ubiquitous sensor network service, energy conversion and the testing of storage experiment are also carried out.

• 센서학회지
• /
• 제11권3호
• /
• pp.132-137
• /
• 2002

본 연구에서는 온도에 따른 압전특성이 매우 안정적인 $LiTaO_3$ ($x-112^{\circ}$ y) 단결정을 이용하여 압전변압기를 제작하고 그 특성을 분석하였다. 제작시 $LiTaO_3$ 단결정의 변환효율이 낮은 단점을 보완하기 위해 Lame'-mode를 이용하여 길이와 폭의 비가 2:1인 압전변압기를 제작하고 PSpice를 이용하여 진동 모드 해석, 입력전압에 따른 출력전압특성 및 진동속도특성을 분석하였다. 제작한 압전변압기는 길이방향의 제 2차 고조파 주파수와 폭방향의 기본공진주파수가 결합된 290.83[kHz]에서 입력전압에 대한 최대출력전압이 나타났으며, 약 10배 정도의 승압비를 얻을 수 있었다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.526-526
• /
• 1996

The single crystal of LiTaO3 is well known eletro-optic material as well as the piezoelectric one applied to SAW filter. LiTaO3 has large electro-optic effects, so applied to optical switch, acosto-optic deflector, and optical memory device using photorefractive effects. The crystal growth of SAW-grade LiTaO3 has been studied many aspects, but there is no detail research about optic-grade crystal growth. The conditions of optic-grade LiTaO3 single crystal are as below. The optical transmittance must be over 75%, and axial and radial concentratiom uniformity below 1%. The variation of Curie temperature depending on Li/Ta ratio must be also below 2$^{\circ}C$ and no internal no internal cracks and defects. Because of the limitation of crystal quality, the growing of optic-grade LiTaO3 single crystal is very difficult compared with the growing of SAW-grade. In this research, upper conditions of optic-grade single crystal was investigated after growing of 1 inch diameter and 1.5 inch length LiTaO3 single crystal having no internal cracks and defects using Czochralski method. Curie temperature was determined with DSC and measuring capacitance and lattice parameter was calculated about the grown crystal and ceramic powder samples of various Li/Ta ratio. The result of Tc variation was below 1.2$^{\circ}C$ all over the grown crystal, so it is confirmed that LiTaO3 was grown under congruent melting composition having optical homogeniety. Also, the optical transmittance was about 78%, which was sufficient for optical device.