• Electrical & Electronic Materials
• /
• v.2 no.2
• /
• pp.109-116
• /
• 1989

PSN-PT-PZ 삼성분계 압전세라믹의 상도로부터 유전적, 압전적 특성이 가장 양호한 MPB부근의 조성을 선택하여 MnO$_{2}$를 0-2[wt.%]첨가하였으며 일반소성법으로 시편을 제작하였다. 소결온도는 1,200-1,280[.deg.C], 시간은 0.5-3[hr]까지 변화시켰으며 MnO$_{2}$의 첨가가 시편의 유전적, 압전적 특성에 미치는 영향을 고찰하였다. 제작된 시편의 비유전상수는 MnO$_{2}$의 첨가량에 따라 증가하였으며 MnO$_{2}$가 2[wt.%]첨가된 시편 S-15(PSN:PT:PZ, 15:48:37)의 경우 605.41, 큐리온도는 MnO$_{2}$의 첨가량이 증가할수록 선형적으로 감소하였다. 각 시편의 전기기계 결합계수와 유전손실은 MnO$_{2}$의 첨가량이 0.5-1.5[wt.%]범위에서 양호한 특성을 나타내었으며 MnO$_{2}$가 0.5[wt.%] 첨가된 시편 S-5(PSN:PT:PZ, 5:48:47)의 경우 전기기계 결합계수는 0.425로 가장 높은 값을 나타내었다. MnO$_{2}$가 1[wt.%] 첨가된 시편 S-10(PSN:PT:PZ, 10:48:42)에서 공진주파수의 온도의존성이 가장 양호하게 나타났으며 각 시편에 대한 MnO$_{2}$의 첨가량이 증가할수록 결정립 크기는 감소하였다.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.974-977
• /
• 1999

PSN-PT 2성분계 압전세라믹스의 상도로부터 유전적, 압전적 특성이 양호한 MPB (Morphotropic phase boundary)부근의 조성을 선택하여 도너 도펀트인 $Nb_{2}O_{5}$와 억셉터 도펀트인 $Fe_{2}O_{3}$를 각각 $0{\sim}0.9wt%$ 첨가하여 유전 및 압전특성을 비교, 연구해보았다. 시편모두 $1250^{\circ}C$ 이상에서 이론밀도의 96%이상의 값을 얻을 수 있었고 상온, 1kHz에서 $Fe_{2}O_{3}$의 경우 0.1wt% 첨가된 시편에서 ${\varepsilon}_r$=2054의 최대 비유전율이 나타났으며, 0.7wt% 첨가된 시편에서는 $tan{\delta}$=0.49%의 최소 유전 손실값을 얻었다. $Fe_{2}O_{3}$가 0.1wt%, 0.3wt%로 첨가되었을 때 각각 $K_p$=58%, Qm=222의 값을 얻을 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.31 no.9
• /
• pp.1037-1043
• /
• 1994

The effects of annealing atmosphere and temperature on piezoelectricity (k33) and the mechanical strength of machined PZT was studied. Morphotropic Nb-doped PZT was sintered, machined to a rod and then annealed between 80$0^{\circ}C$ and 100$0^{\circ}C$ in air, PbZrO3, and CuO atmospheres respectively. In air or PbZrO3 atmosphere, the compressive strength of Nb-doped PZT increased by 12% with little change in k33 irrespective of annealing temperature. In CuO atmosphere, on the other hand, the compressive strength increased by 20% with little change in k33 at 80$0^{\circ}C$ but both turned to significant decrease above 90$0^{\circ}C$. The examination of the phase distribution and microstructure beneath the surface of CuO-treated PZT revealed that the changes in compressive strength and k33 are closely related to the reaction between PZT and vaporized CuO:liquid PbO precipitated in shallow surface region by the substitution of Cu to Pb sites enhances the decrease in microcracks and the surface roughness at 80$0^{\circ}C$ ; rapid evaporation of precipitated PbO expands a porous region of changed composition into the bulk above 90$0^{\circ}C$.

• Electrical & Electronic Materials
• /
• v.8 no.2
• /
• pp.158-164
• /
• 1995

Solid solutions Sr$_{2}$(Ta$_{1-x}$ Nb$_{x}$)$_{2}$O$_{7}$, (x=0.0-1.0), composed of strontium tantalate(Tc=-107.deg. C) and strontium-niobate(Tc=1342.deg. C) were prepared by the conventional mixed oxide method and the flux method(molten salt synthesis method). Phase relation, sintering temperature, grain-orientation and dielectric properties for sintered ceramic samples were investigated with different compositions. Both Curie temperature and dielectric constant at Curie temperature were increased, and sintering behavior and the degree of grain-orientation were improved with the increase of Nb content. The single phase Sr$_{2}$(Ta/sib 1-x/Nb$_{x}$)$_{2}$O$_{7}$ powder was synthesized by using the flux method at lower temperatures, and sintering temperature was also reduced by using the flux method-derived powder than using the mixed oxide-derived powder. Sintering characteristics and dielectric properties of the specimens prepared by the flux method were better than those derived through the conventional mixed oxide method.thod.hod.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.157-160
• /
• 2001

We have investigated the Dielectric and Piezoelectric properties of $xPb(R_{1/2}Ta_{1/2})O_3-(1-x)Pb(Zr_{0.52}Ti_{0.48})O_3$ (R=Al,Y) solid solutions in which R ions are substituted for Al and Y ions. The maximum value of electromechanical coupling factor kp of 55% and 51% were obtained at the composition of 5mol% PAT and 5mol% PYT. However mechanical quality factor$(Q_m)$ had a minimum value of 44 and 69 at the composition of 5mol% PAT and 5mol% PYT. Also, the maximum value of piezoelectctric constant of $d_{33}(329[pC/N])$ and $d_{33}(310[pC/N])$ were obtained at the composition of 5mol% PAT and 5mol% PYT.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.3
• /
• pp.53-59
• /
• 2008

This paper reports an experimental investigation to design a tree-shaped wind power system using piezo-electric materials. The proposed system is to produce power if wind is strong enough to produce any bending motions in the energy converting elements, i.e., piezo-electric materials. Two different kinds of piezoelectric materials are used in the present study to produce power by scavenging energy from the wind. The soft flexible one made the leaf element while the hard one was applied to the trunk portion of the tree requiring rather strong winds to generate any power. Although small, each leaf deems to play the role of a power producer and currents are continuously trickling down to the storage battery installed at the bottom of the system.

• Journal of the Korean Ceramic Society
• /
• v.17 no.2
• /
• pp.80-88
• /
• 1980

The sintering phenomena and piezoelectric properties of PZT ceramics of composition $Pb(Zr_{0.54} Ti_{0.46})O_3$ were investigated when a small quantity of $La_2O_3$ , $LaMnO_3$, $LaCrO_3$ were added. The unwanted chemical composition change in PZT during sinterin porces du to PbO evaporation poses a severe problem in PZt manufacturinig. It is observed tat an addition of small amount of $LaMnO_3$ to PZT markedly decreases the evaporation of PbO during sintering . The green compact of (1-x) PZT.xLaMnO3(x=0.02~0.10) could be sintered of under O2 atmosphere alone with no significant loss of PbO. The planar coupling factor kp of the sintered $0.98Pb(Zr_{0.54} Ti_{0.46})O_{3.0.02}LaMnO}3$ is similar to that of commercial PZT 6A. Microstructure investigation shows that part of sintering process of $Pb(Zr, Ti)O_3$.$LaMnO_3$ system progresses via liquid phase sintering. It is believed that the evaporation of PbO in PZT sintering is restricted by the addition of $LaMnO_3$ due to the above phenomena. Furthermore the solid solution of $LaMnO_3$ in PZT causes diffuses phase transition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.343-343
• /
• 2008

Newly designed structure of a thin ultrasonic rotary motor was proposed. Thin brass plate was used as a cross shaped vibrator and eight ceramic plates were attached on the upper and bottom sides of the brass plate as in Figure 1. The thin type ultrasonic motor has the structure adherent piezoelectric ceramic on the top and bottom surface of the thin elastic body. The direction of polarization is decided so as to occur the elliptical displacement in regular sequence at touch point A, B, C and D of stator contacted with rotor. By applying two electric fields which have 90 degree phase difference on the ceramics, each contact points make rotational displacements as in figure 2. Finite element analysis program ATILA was used to find the optimal size of the stator. As a result of the simulation, elliptical displacements of the tips were obtained at off-resonance frequencies. The maximum displacements of the contact tips were obtained at the length of 16[mm], width of 6[mm] and thickness of 0.4[mm]. Changes of the resonance frequencies were inversely proportional to the length of ceramic and proportional to the width of ceramic. Elliptical motions of the contact tips. of the stator were consistently obtained at off resonance frequencies. From a prototype motor, speed of 600[rpm] was obtained at 20[Vrms].

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.56-56
• /
• 2008

최근, 비납 또는 납의 함량을 줄인 압전 세라믹에 대한 관심이 증가하고 있고, 그에 따른 여러 연구가 활발히 이루어지고 있다. 납을 포함하는 세라믹은 높은 소성온도에서 납의 휘발로 인한 특성저하와 환경오염 등이 문제가 된다는 것을 우리는 익히 알고 있다. 그렇기 때문에 PZT계 세라믹스를 대체할 우수한 특성을 가지는 새로운 비납 세리믹스의 조성개발이 시급하다. 비납계 세라믹스 중에서 NKN계를 바탕으로 하는 세라믹스는 가장 기대되는 재료이다. 일반적인 소성에서 순수한 NKN 세라믹은 가장 높은 압전 $d_{33}$상수가 100 pC/N이 넘지 않는다. 그런데 페로브스카이트 구조로된 NKN세라믹스의 A-site에 $Li^{1+}$이온을 치환하면 압전 특성을 향상시킬 수 있다. 그리고, 압전세라믹에서 분극처리는 필수적인데 분극처리는 압전성을 부여할 뿐 아니라 다른 물성도 변화시킴은 잘 알려져 있다. 그러므로 그에 대한 연구 또한 중요한 의미를 갖는다. 따라서 이번 연구에서는 NKN세라믹스에 $Li_2CO_3$를 소결조제로 첨가하여 시편을 제작하였고, 제작된 시편의 특성을 분극전계에 따라 조사하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.257-257
• /
• 2007

압전 액츄에이터의 효율적 작동을 위해서는 변위량이 크고 이력이 없으며 응답이 빠르고 온도특성이 좋아야 하는 등의 여러 조건들을 만족시켜야 한다. 따라서 본 실험은 압전 효율은 높이고 압전 손실은 낮추기 위하여 Pb$[(Mn_{1/3}Sb_{2/3})_{0.04}\;Zr_x\;Ti_y]O_3$, 세라믹스를 선정하였으며 Zr/Ti의 변화(x=0.47~0.5, y=0.46~0.49)에 따른 각각의 압전 특성 및 강유전 특성을 조사하였다. 일반적인 산화물 합성법을 이용하여 압전 분말을 제조하였고 EMAS standard(6001)에 근거하여 시편을 제조하였다. XRD 관찰결과 모든 조성에서 perovskite구조의 단일상만을 나타내는 소결체를 얻을 수 있었으며 FE-SEM 관찰결과 $1250^{\circ}C$의 소결시편이 $2-3{\mu}m$의 grain size를 갖는 치밀한 미세구조를 나타내었다. 가장 우수한 압전특성을 나타내는 조성은 Zr/Ti의 비가 0.485/0.475 조성이었으며 그때의 전기기계 결합계수(Kp) 값은 62.5%였고, 기계적 품질계수(Qm) 값은 1004였다.