• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3123-3129
• /
• 2016

Background: Cancer is the fourth leading cause of death in Sabah Malaysia with a reported age-standardized incidence rate was 104.9 per 100,000 in 2007. The incidence rate depends on non-mandatory notification in the registry. Under-reporting will provide the false picture of cancer control program effectiveness. The present study was to evaluate the performance of the cancer registry system in terms of representativeness, data quality, simplicity, acceptability and timeliness and provision of recommendations for improvement. Materials and Methods: The evaluation was conducted among key informants in the National Cancer Registry (NCR) and reporting facilities from Feb-May 2012 and was based on US CDC guidelines. Representativeness was assessed by matching cancer case in the Health Information System (HIS) and state pathology records with those in NCR. Data quality was measured through case finding and re-abstracting of medical records by independent auditors. The re-abstracting portion comprised 15 data items. Self-administered questionnaires were used to assess simplicity and acceptability. Timeliness was measured from date of diagnosis to date of notification received and data dissemination. Results: Of 4613 cancer cases reported in HIS, 83.3% were matched with cancer registry. In the state pathology centre, 99.8% was notified to registry. Duplication of notification was 3%. Data completeness calculated for 104 samples was 63.4%. Registrars perceived simplicity in coding diagnosis as moderate. Notification process was moderately acceptable. Median duration of interval 1 was 5.7 months. Conclusions: The performances of registry's attributes are fairly positive in terms of simplicity, case reporting sensitivity, and predictive value positive. It is moderately acceptable, data completeness and inflexible. The usefulness of registry is the area of concern to achieve registry objectives. Timeliness of reporting is within international standard, whereas timeliness to data dissemination was longer up to 4 years. Integration between existing HIS and national registration department will improve data quality.

• Journal of the Korean Society of Radiology
• /
• v.14 no.3
• /
• pp.245-252
• /
• 2020

The purpose of this study was intended to recognize the importance of quality control (QC) in order to reduce exposure and improve image quality by comparing the center-point (CP) of according to hospital grade and the difference between X-ray field (XF) and light field (LF) in diagnostic digital X-ray devices. XF and LF size, CP were measured in 12 digital X-ray devices at 10 hospitals located in 00 metropolitan cities. Phantom was made in different width respectively, using 0.8 mm wire after attaching to the standardized graph paper on transparent plastic plate and marked as cross wire in the center of the phantom. After placing the phantom on the table of the digital X-ray device, the images were obtained by shooting it vertically each field of survey. All images were acquired under the same conditions of exposure at distance of 100cm between the focus-detector. XF and LF size, CP error were measured using the picture archiving communication system. data were expressed as mean with standard error and then analyzed using SPSS ver. 22.0. The difference in field between the XF and LF size was the smallest in clinic, followed by university hospitals, hospitals and general hospitals. Based on the university hospitals with the least CP error, there was a statistically significant difference in CP error between university hospitals and clinics (p=0.024). Group less than 36-month after QC had fewer statistical errors than 36-month group (0.26 vs. 0.88, p=0.036). The difference between the XF and LF size was the lowest in clinic and CP error was the lowest in university hospital. Moreover, hospitals with short period of time after QC have fewer CP error and it means that introduction of timely QC according to the QC items is essential.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.215-224
• /
• 2005

With the recent increase of sensitivity to decors, there has been an ever-increasing significance of exhibiting the beauty of the outer looks of an article. This trend has necessarily led to the diversification and also specialization of the color scheme activities. And so, it is inevitable that we should form the substantial ideas of the color scheme and further on, enhance the efficacy of its orientation under the prevailing circumstances. Now, we come to a realization that we must first take a glance at the whole picture of the arrays of color embedded in a variety of articles in the sixties and seventies of the 20th century, a bold introduction of color designs, thereby tracing the birth of color designs and finding a meaning in its mechanism. This study begins with the obtaining of a large collection of articles in those days, along with the literature on the commercial effects color suggest, and looking into the background of their trend and finding a meaning that underlies what these colors suggest. The general idea of those color designs exemplifies that the color selection was none other than the simplicity and convenience in the making of things in doser relation to the easy selling. With the advance of material quality and enhancement of the industrial idealism, it has been proved that color plays an important role in depicting the image of quality and tastes of class. In that role color has been given the indicator of visual delights and differentials in quality articles. All this has been reflected in a diversity of articles: for instance, white for household appliances, prime color for living necessaries and natural color for the decore like furniture. Formerly, after all, people used to have little regard for color. What is color for, it was thought, in relation to the selling image of articles? That is wily our preceding generation pays attention only to the first-hand looks of articles, neglecting the intensive study on color. We are beginning to understand what image a certain color scheme evokes in our feeling.

• Journal of Broadcast Engineering
• /
• v.19 no.4
• /
• pp.453-467
• /
• 2014

A typical histogram equalization contrast enhancement effect for improving the image quality is excellent. However, because it appears that excessive changes of the brightness values, The average brightness of the image is changing in units of frames of applications such as a TV video is unsuitable. In order to solve these drawbacks, a modified method of histogram equalization on various studies have been made. But the result images of existing methods sometimes shown visual degradations such as over-enhancement and false contouring. In this paper, we propose improved contrast enhancement method through bi-histogram equalization using target mean brightness based on differential compression method. The proposed method is based on the average brightness value by dividing the histogram, the histogram for each zone, according to the frequency differential of compression. And equalize the modified histogram based on target mean brightness. This allows to suppress deterioration of picture quality, and changes in the average brightness of each frame of video, while maintaining and improving the contrast. Experimental results show that the proposed method compared to the conventional method, the average brightness of each frame from a movie well maintained, and no degradation of the image quality showed a good effect to improve the contrast.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.696-701
• /
• 2017

This paper proposes an improved de-interlacing method that converts interlaced images into progressive images from one field. First, it calculates inter-pixel values applying third-order spline interpolation for the horizontal direction from four upper lower pixel values of missing pixels. From inter-pixel values obtained from spline interpolation and upper lower pixels with value, the proposed method makes an accurate estimate of the direction by applying the correlation between upper and lower pixels. The correlation between upper and lower pixels is calculated in nine directions of a missing pixel by using values obtained from spline interpolation and pixels with value. The direction of an edge is determined as the direction in which the correlation between upper and lower pixels is at its minimum. Thus, a missing pixel is calculated by taking the average of upper lower pixels obtained from the predicted direction of an edge. From the simulation results, there are problems in that it takes a bit more time for processing, but it is expected that the time problem will be improved by increasing CPU processing speed. As for image quality, it is shown that the proposed method improves both subjective and objective image quality and quantitatively improves picture signal-to-noise ratio (PSNR) in the range between 0.1 dB to 0.5 dB, as compared with previously presented de-interlacing methods.

• Journal of the Korean Society of Radiology
• /
• v.10 no.5
• /
• pp.367-373
• /
• 2016

This study conducted an analysis to compare the differences in the properties of the magnetic field and the generation of artifacts because of the difference in the magnetic field between 1.5 T equipment and 3.0 T equipment, centering around four types of pulse sequences, mainly applied to the abdominal Magnetic Resonance Imaging (MRI). With data on 500 persons transmitted to the PACS, this study analyzed the SNR value, quantitatively and carried out a qualitative evaluation, dividing MSA, CSA, and DA into three steps. As a result of the quantitative evaluation, the SNR value was significantly higher in the 1.5 T equipment; however, there was a factor deteriorating the image quality, too, as artifacts were generated in the images. The 1.5 T equipment generated fewer artifacts than the 3.0 T equipment did, so it could compensate the image quality for 3.0 T. In conclusion, based on these findings, this study could understand the differences in the properties of the magnetic field and the generation of artifacts occurring because of the difference in the magnetic field and could provide a measure for them. This study would be guidelines for MRI users who directly examine the patients in abdominal MRI using the two types of equipment in the clinical setting in the future.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.8
• /
• pp.1088-1096
• /
• 2006

The purpose of this study was to identify the service encounter blueprint by types of restaurants in order to manage moment of truth when customers who visit a restaurant encounter services. The service encounter blueprint gives an overall picture of the service provision to visualize an entire service process and its integrated structure. The blueprint is used for service process analysis technique. The random samples of 15 customers were observed by types of restaurants and the records were collected for three-days' observation. Interviews were performed by 3 managers, 3 service encounter employees, 3 cashiers, 3 cooks and 10 customers by types of restaurants. After drawing the first service blueprint, it was revised by the interview with the 3 managers and 6 service encounter employees. In this paper, restaurant service processes are reviewed and analyzed. By use of service blueprint, the processes are analyzed to find a fail point, customer wait, employee decision. As a result of making a blueprint of service encounter by types of restaurant, blueprints of fine-dining restaurants and family restaurants were similar, while fast-food restaurants showed a little difference. In particular, difference was indicated in a point where interaction of service encounter occurred. Difference was indicated depending on types of restaurants. Therefore, the efforts to improve this problem were needed. The blueprint is a map or flowchart (called a process chart in manufacturing) of all transactions constituting the service delivery process. The results showed that service encounter blueprint can be used to improve the service process in the restaurant's encounter.

• Journal of radiological science and technology
• /
• v.25 no.2
• /
• pp.57-64
• /
• 2002

The recent development of embodiment technology of the medical images makes most medical institutions introduce PACS(Picture Archiving and Communication System) in haste. However lots of PACS solutions, currently developed and distributed, haven't been able to serve the convenience of users and to satisfy user's demand because of economic limitations and administrator-oriented considerations in the process of development. So we have developed MIH(Medical Image History), by which we can search and refer to the patient's medical images and information with few restrictions of time and space for diagnosis and treatment. This program will contribute to the improvement in the medical environment and meet the clients' need. We'll make more effort to develop the application which insures the better quality of medical images. MIH manages the patient's image files and medical records like film chart in connection with time. This trial will contribute to the reduction of the economical loss caused by unnecessary references and improve the quality in the medical services. The demand on the development or the program which refers to the medical +ata quickly and keeps them stable will be continued by the medical institute. This will satisfy the client's demand and improve the service to the patients in that tile program will be modified from the standpoint of the users. MIH is trying to keep user-oriented policy and to apply the benefit of the analog system to the digital environment. It is necessary to lead the public to the better understanding that the systematic management and referring of the medical images is as important as the quality of the images.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_1
• /
• pp.121-137
• /
• 2020

Data from the Ozone Monitoring Instrument (OMI) satellite and national emission inventories were used in this study to analyze air quality in East Asia and estimate the impact of domestic and foreign emissions on South Korea's air quality, based on which future emissions were predicted. The concentration trends of nitrogen dioxide (NO₂) and sulfur dioxide (SO₂) in East Asia from 2005 to 2015 showed that both substances were highest in North East China (NEC), followed by South East China (SEC) and Seoul Metropolitan Area (SMA). The average SO₂ concentration was 1.63 times higher in NEC than in SMA. Analysis on the ratios of NO₂/SO₂ and NO_x/SO_x provides an indirect picture of the effect of transboundary air pollutants on atmospheric composition in Korea. The concentration ratio of NO₂/SO₂ in all study areas peaked in 2013 and SMA's emission ratio of NO_x/SO_x increased in 2015 by over 22% from 2013. Despite the reduction in domestic emissions, the concentration-to-emission ratios (NO₂/NO_x, SO₂/SO_x) rose gradually, which implies that other factors besides domestic emissions (e.g., foreign sources, lifetime, etc.) influence air quality in SMA. We estimated future emissions of NO_x and SO_x in SMA to be 296.2 and 39.0 ktons in 2025 and 284.4 and 33.8 ktons in 2035, respectively. Application of the inter-comparison techniques of this study to the data from the Geostationary Environment Monitoring Instrument (GEMS) is expected to provide concrete information which can be used to improve national emission inventories and figure out factors and sources that affect domestic air quality.

• Journal of Broadcast Engineering
• /
• v.2 no.2
• /
• pp.206-215
• /
• 1997

We pror.a;e a H.263-based video ceder with two-layer ocalability. The bare layer is ceded by using the default H.263 axling algorithms to achieve high compresred video data and the enhanced layer is axied by enhanced axling such as HVS-based quantization updating. The enhanced layer contains only arled refinement data for the OCT coefficients of the bare layer. Bitstream syntax and semantics for enhancement layer are designed and quantizer design using the HVS is pror.ooed. Data from the two layers are combined after inverse quantization and inverse OCT prcx:esses in the deaxier. We show with e~rirrental results that the pror.a;ed layered arlee achieves comparable picture quality with non-layered arlee at bitrates of 30 kbr;s or less. Overhead information for the bitstream layer can 00 limited to less than 0.5 kbits/frame.