• Korean Management Science Review
• /
• v.21 no.3
• /
• pp.115-127
• /
• 2004

In this paper, we describe an intelligent monitoring and control system for pick-up/delivery service. This system applies geographical information system(GIS), global positioning system(GPS) and wireless communication technologies for managing pick-up/delivery operations more effectively. It consists of three subsystems, pick-up/delivery sequence planning system, pick-up/delivery monitoring system, and PDA execution system. Pick-up/delivery sequence planning system generates routes and schedules for pick-up/delivery using GIS and optimization techniques. Pick-up/delivery monitoring system monitors current positions of vehicles and actual pick-up/delivery results as compared with planned routes and visit times, while PDA execution system transmits information for vehicles positions and actual pick-up/delivery results using GPS and wireless communication technologies. The intelligent monitoring and control system is currently being used for the pick-up parcel service in a local post office of Korea Post.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.191-194
• /
• 2002

In optical pick-up, optical components such as objective lens, collimator, mirror, laser diode and photo diode are mounted on the pick-up base. These components must keep their original position during operation for proper transmittance of information from laser diode to optical disk and back to photo diode. However, micro thermal deformation of pick-up base which is induced by thermal environment during operation can deteriorate the performance of optical pick-up. Therefore, it is important to measure and analyze the thermal deformation behavior of pick-up base under thermal environment. In the present study, a measurement system using holographic interferometry was designed to measure micro thermal deformation of pick up base. The measurement system was verified by using the deformation of cantilever with prescribed motion actuated by PZT with 1 nm resolution. Interferometric measurement was compared quantitatively with that induced by PZT actuator. Finally, micro thermal deformation of pick-up base under actual thermal environment was measured using the present holographic interferometry and the results were analysed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.327-328
• /
• 2006

Recently, as the infocomindustry is developed, the semiconductor industry as well as the optical industry such as the optical communication and the optical instrument is developed rapidly. The transmission, storage and processing of information has been reaching an limit because amounts of information increase rapidly. The more quickly the optical communication is developed, the more sharply the demand of optical elements increase. The transport and inspection process is time consuming and the error rate is high, because this process are not automated in case of an optical lens. In this paper, the pick-up system that can hold optical elements and be transferred by the ultrasonic transport system is developed. The inspection system that distinguishes between the existence and the nonexistence of a defect is connected easily to pick-up system. The pick-up system separates the optical glass lens by results of the inspection. The automation program is developed by visual c++ programming.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1339-1343
• /
• 2004

This paper presents a development of the control algorithm and Pick & Placer. The Pick & Placer provides a powerful multi-task system that includes both graphical and remote interface. Users can easily set up sorting parameters and record important data including wafer number, data, and operator information. This System sets up a dustproof device and massively machined components to provide an extremely stable sorting environment. Precise resolution and accuracy result from using machine vision, a pneumatic slide drive and close -looped positioning.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.38-49
• /
• 1998

The 3rd generation optical pick-up used popularly in resent years is composed of many optical and electronic components such as laser diode, photo diode, beam splitter, objective lens, grating lens, concave lens, collimator lens etc. Therefore, the design of its optical system and its main base which the said optical and electronic components are set on, is complicated and needs high precision. Its assembly and adjustment in the production line is also difficult. This complication and the demand of high precision get its production cost to be high and its reliability to be low. In this paper, the 4th generation optical pick-up is designed and developed, with the hologram device which laser diode. photo diode, beam splitter. and grating lens are integrated in. This optical pick-up reduces the number of points of adjustment by 3, compared with the 3rd generation optical pick-up of which the number of points of adjustment is 6. This optical pickup also decreases by 4 the number of points of W bonding to have bad influence on environmental reliability, decreases by about 10 the number of parts, and establishes about 20% cost-down of material cost, compared with the 3rd generation optical pick-up.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.21-25
• /
• 2006

The new multimedia information environment requires smaller optical data storage systems. However, one of the difficulties encountered in designing small form factor(SFF) optical pick-up is to emit the heat which is generated from laser diode(LD). Heat generated at the LD can reduce the optical performance of the system and the lifetime of LD. Therefore, it is important to include the thermal design in the design stage of SFF optical pick-up system for high performance and the longer lifetime of LD, and furthermore, to analyze the thermal characteristics of LD in detail micro heat transfer analysis is necessary. In the present study, micro heat transfer analysis was performed using the finite element method for the $28{\times}11{\times}2mm^3$ super slim swing-arm type optical pick-up actuator for Blu-ray disk. Two different materials were used for a swing-arm; a double layer polycarbonate/steel structure and a single aluminum structure.

• Journal of Navigation and Port Research
• /
• v.29 no.4
• /
• pp.305-312
• /
• 2005

Pick-up/delivery of consumer goods to offices, shops, and restaurants in order to support urban lives is one of the most vital activities in a city. With economic growth and technological innovation, a greater variety of goods have come to be supplied, and pick-up/delivery of consumer goods has become more complex. Efficient urban goods movement in Central Business District(CBD} starts with an efficient system for loading/unloading, and pick-up/delivery activities. Loading/unloading activity may be carried out on-street, or on especially designated space inside or outside buildings. Therefore, purpose of this study is to clarity the efficient urban goods movement in CBD(also called the pick-up/delivery activity) from the three different types of loading/unloading facilities. For this purpose, the differences in loading/unloading and truck-trip activity time of each loading/unloading facility was compared by performing the simulation analysis.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.16 no.28
• /
• pp.195-202
• /
• 1993

This paper considers the vehicle routing problem taking account of not only delivery but pick-up at the same time. A mathematical formulation is presented for finding the route which satisfies all the demands of customers and enables picking up most containers without exceeding the capacity of the vehicle. A table comparing traveling distance and the pick-up amount is provided by using heuristic method, which will be of help to the decision makers.

• Journal of KSNVE
• /
• v.6 no.4
• /
• pp.521-528
• /
• 1996

Recently, higher speed optical disk drives including computer CD-ROM drives tend to be increasingly demanded to read or write the enormous volume of digital data. To this end, both structure and controller designs of the optical pick-ups should be improved concurrently. In this paper, the pick-up during auto-focusing motion is mathematically modelled retaining all its peculiar features. The model turns out a linear time invariant system suitable for a control design namedH${\infty}$ which ensures robust stability in the presence of system uncertainties. Numerical simulations are performed to demonstrate the robustness with appropriate performance specifications being satisfied. In addition, as the implementation issue of it, procedures of temporal discretization as well as model reduction of the controller are also addressed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.373-377
• /
• 2002

In this study, we suggested a slim-type actuator that can be controlled in radial direction for compensating coma aberration in high-capacity optical storage devices. To deal successfully with narrow space in slim-type optical pick-up for notebook pc device, additional yokes for tilting motion are integrated into main yoke of the actuator. And the location of tilting coils is determined for mass-b3lancing effect to achieve optimal configuration for high driving sensitivity. We also suggested new concept of lens holder to guarantee excellent stability of control system by enhancing the gain margin at secondary resonant frequency. The concept was realized by forming damping sections in the lens holder, which prevent vibrational energy from transferring to lens. An exclusive measurement system was newly developed for fast and precise measurement of dynamic characteristics of actuators and utilized for the practical use. We hope to make good use of this system also in time to come.