• Title/Summary/Keyword: Physicochemical parameters

Search Result 325, Processing Time 0.029 seconds

Community Structure of Benthic Macroinvertebrates of Daecheon Stream in Busan City (부산 대천천의 저서성 대형무척추동물의 군집구조)

  • Son, Jung-Won;Hong, Jung-Hee
    • Journal of Environmental Science International
    • /
    • v.19 no.2
    • /
    • pp.185-196
    • /
    • 2010
  • The distribution of benthic macroinvertebrates in Daecheon stream, an urban stream of Busan, was investigated to analyze the community structure of benthic macroinvertebrates. The collection was performed monthly at five(A~E) sites divided into three parts, upper, middle and lower, of stream from January to November, 2004. In physicochemical analysis of environmental factors, water quality parameters such as BOD, COD, conductivity and ABS were relatively increased in sites B and C. Whereas sites A, D and E showed little variations with good water quality parameters. However, water quality parameters in all surveyed sites showed gradual decrease with time toward improvement of water quality. A total of 8,226 individuals including 4 phyla, 6 classes, 9 orders, 302 families and 44 species were identified from five sites. The most dominant group was insect(class Insecta), and order Ephemeroptera and Diptera among insect was the largest member in species(30.6%) and individuals(75.0%) of benthic macroinvertebrates, respectively. The primary dominant species were Gammarus sp. and Ephemera strigata in site A, whereas Chironomus sp. and Brenchiura sowerbyi were dominated commonly in the other sites. In community analysis of benthic macroinvertebrates of Daecheon stream diversity index showed relatively low values, whereas dominance index was significantly high. Diversity index was the highest in site A, whereas the dominance index was the highest in site B. However, diversity index showed gradual increase with time showing adverse mode in dominance index. From these results, it can be suggested that long-term ecological monitoring of benthic macroinvertebrate fauna is needed for sustainable management of Daecheon stream.

Impact of Milling Method on Quality Parameters of Waxy Sorghum Flour (제분방법에 따른 찰수수 가루의 품질 특성)

  • Ryu, Bog-Mi;Kim, Chang-Soon
    • Korean journal of food and cookery science
    • /
    • v.29 no.2
    • /
    • pp.129-135
    • /
    • 2013
  • The objective of this research was to investigate physicochemical properties of waxy sorghum flours by different milling methods (pin mill and ultra fine mill). Four different sorghum flours were used for the experiments ; PWS (pin milled whole sorghum flour), PS (pin milled sorghum flour without bran), UFWS (ultra fine milled whole sorghum flour), UFS (ultra fine milled sorghum flour without bran). The contents of crude ash and total dietary fiber were the highest in PWS. Amylose content of pin milled sorghum flour was higher than that of ultra fine milled flour. The mean particle size of pin milled flours was six times lager than ultra fine milled flours. The L values of UFS and UFWS were higher than those of PS and PWS, whereas a and b values were higher in PWS. The water binding capacity was highest in UFWS, and solubility was higher in PS and UFS. Swelling power of flours was highest in UFS. The damaged starch content was higher in PS and UFS, which means damaged starch of sorghum flours significantly affected by polishing than milling method. The pasting properties were higher in the pin milled flours. Initial pasting temperature of pin milled flour was ranging from 70.5 to $73.1^{\circ}C$, which are higher than ultra fine milled flour ($68.6^{\circ}C$). The contents of total polyphenol were higher in PWS and UFWS than those of PS and UFS, there was no difference between the two milling methods. The results of this study indicate that physicochemical properties of sorghum flour were affected by milling methods as well as bran.

Nutritional Components and Physicochemical Properties of Lipids Extracted from Forest Resources (산림자원에서 추출한 유지자원의 영양성분 및 이화학적 특성 검토)

  • Kim, Mi-So;Park, Joon Hyung;Lim, Ho-Jeong;Kim, Da-Som;Kim, Hoe-Sung;Lee, Kyoung-Tae;Park, Yong Bae;Shin, Eui-Cheol
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.46 no.4
    • /
    • pp.529-536
    • /
    • 2017
  • Nutritional constituents and physicochemical properties of lipids of forest resources were studied in order to examine their practical utilization in the lipid industry. In this study, Garae, Dongback, Mougwi, and Muwhanja were chosen as sources of fat-soluble components. Fatty acid profiles of forest resources showed more than 80% polyunsaturated fatty acids in total fatty acids. For total tocopherol contents, Garae showed higher content than others; moreover, Dongback was a good source of ${\alpha}$-tocopherol. Phytosterols of forest resources ranged from $55.96{\pm}2.23$ to $194.94{\pm}21.42mg$/100 g, and Muwhanja showed the highest phytosterol contents. Chemical properties such as acid value, peroxide value, and p-anisidine value showed good oxidative stability of lipids of forest resources. For physical properties, browning intensity and color parameters were studied. Induction times, as an indicator of oxidative stability, were measured and ranged from $0.70{\pm}0.01$ to $18.40{\pm}1.02h$ in four forest resources. Taken together, contents of lipid constituents and physicochemical properties can be used as an important preliminary database for utilization of lipids of forest resources.

Physicochemical and sensory characteristics of commercial RTD cold brew coffees (RTD (Ready-to-drink) 콜드브루커피의 이화학 및 감각특성 분석)

  • Song, Young-Ju;Hwang, Hyun-Ju;Lee, Seung-Joo
    • Korean Journal of Food Science and Technology
    • /
    • v.51 no.1
    • /
    • pp.35-41
    • /
    • 2019
  • The sensory characteristics of eight commercial ready-to-drink (RTD) cold brew coffees were compared by descriptive analysis. The cold brew coffee samples were analyzed for hunter color values, brown color, turbidity, pH, titratable acidity, soluble solids, total phenolic content, and chlorogenic acid content. Three appearances, nine aroma, five flavor/taste, and four texture/mouth-feel related sensory attributes were evaluated by a panel of nine judges. The results of three-way analysis of variance of descriptive data showed that all sensory attributes except "fruit" aroma, "dark chocolate" aroma, "bitter" aroma, and "sweet" taste had significant differences among the samples (p<0.05). Based on the principal component analysis (PCA) of the descriptive data, the samples were primarily separated by first and second principal components, which accounted for 81.78% of the total variance among the samples with high intensities of "nutty aroma", "grain aroma", and "grain taste" versus "earth aroma", "sour aroma", "sour taste", "astringent", "smoothness", and "residual". In the correlation analysis of sensory terms and physicochemical parameters, titratable acidity and soluble solids showed significant positive correlations with earth aroma and smoothness characteristics.

The Effects of Salt Levels and Drying Period on Physicochemical and Sensory Parameters of Dry-cured Ham Ripened in Controlled Condition (소금과 건조기간이 발효실에서 제조된 건염햄의 이화학적 및 관능적 특성에 미치는 영향)

  • Seong, Pil-Nam;Cho, Soo-Hyun;Kang, Geun-Ho;Kim, Jin-Hyoung;Park, Beom-Young;Jeong, Da-Woon;Kim, Byeong-Kyeong;Jung, Jae-Hong;Jeong, Seok-Geun;Kim, Dong-Hoon
    • Food Science of Animal Resources
    • /
    • v.31 no.6
    • /
    • pp.914-920
    • /
    • 2011
  • The aim of this study was to analyze the effects of salt and drying period on the physicochemical and sensory parameters of dry-cured ham ripened in a controlled condition. In this study, three treatments were performed: High salt group (HS), salted with 7 g $kg^{-1}salt$ (w/w); Middle salt group (MS), 5 g $kg^{-1}salt$ and; Low salt group (LS), 3 g $kg^{-1}salt$. Three conditions of drying period were applied including 180, 270 and 360 d at $19^{\circ}C$ and 65% relative humidity, and the physicochemical character and sensory properties of M. biceps femoris were investigated. pH and water activity were decreased with increasing drying period, and the pH of LS was higher than that of other treatments (p<0.05). When increasing the drying period, the hardness of HS was steadily raised for 360 d, whereas LS and MS hardened between 180 and 270 d (p<0.05), and there was no significant difference after 270 d. Cohesiveness, glumness and chewiness had a positive relationship with the drying period. Also, springiness, glumness and chewiness showed a positive relationship with salt level. Chroma and hue value were improved by increasing the salt level. As the drying period increased, the rate of hardness and flavor intensity was increased. In general, this research can be used as essential information for the mass production of dry cured ham.

Physicochemical Characteristics and Analysis of Pollution Potential in the Sediments of the Rivers Flowing into the Saemangeum Reservoir (새만금호 유입 하천 하상 퇴적물의 물리화학적 특성과 오염도 분석)

  • Oh, Kyoung-Hee;Yu, Mi-Na;Cho, Young-Cheol
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.33 no.12
    • /
    • pp.861-867
    • /
    • 2011
  • In order to understand the extent of contamination of the sediments on the Mankyoung and Dongjin Rivers flowing into the Saemangeum Reservoir, the concentrations of ignition loss (IL), COD, total nitrogen (T-N), total phosphorus (T-P), and heavy metals (As, Cd, Cr, Pb, Zn) were measured. The average concentrations of IL, COD, and T-P were 2.40 (${\pm}2.18$)%, 2.97 (${\pm}3.06$) mg/g sediment, 0.370 (${\pm}0.351$) mg/g sediment, respectively, showing the extent of contamination is not serious. However, the concentrations of these parameters in the samples taken in year 2009 were higher than those in year 2008, indicating the contamination of sediments goes on gradually. The concentrations of T-N were in the range of 0.59~13.11 mg/g sediment with variation of locations and seasons. It was determined that the T-N contamination is serious when the concentrations were compared with the dredging guidelines of sediments in the Korean freshwaters, indicating the countermeasures are required to maintain the water quality of the Saemangeum Reservoir. The concentrations of heavy metals except chromium did not exceed the worrisome level of soil contamination stipulated by the Soil Environment Conservation Act of Korea. The high concentration of chromium to be concerned in some samples from the upstream of Mankyoung River requires source analysis and countermeasure to control the contamination.

Measurement of Solubilities in the Ternary System NaCl + CaCl2 + H2O and KCl + CaCl2 + H2O at 50℃ (NaCl + CaCl2 + H2O 및 KCl + CaCl2 + H2O 삼성분계에 대한 50℃에서의 용해도 측정)

  • Yang, Ji-Min;Hou, Guang-Yue;Ding, Tian-Rong;Kou, Peng
    • Journal of the Korean Chemical Society
    • /
    • v.54 no.3
    • /
    • pp.269-274
    • /
    • 2010
  • The solubility and the physicochemical property (refractive index) in the NaCl-$CaCl_2$-$H_2O$ and KCl-$CaCl_2$-$H_2O$ systems were determined at $50^{\circ}C$ and the phase diagrams and the diagrams of physicochemical property vs composition were plotted. One invariant point, two univariant curves, and two crystallization zones, corresponding to sodium Chloride (or potassium chloride), dihydrate ($CaCl_2{\cdot}2H_2O$) showed up in the phase diagrams of the ternary systems. The mixing parameters ${\theta}_{M,Ca}$ and ${\Psi}_{M,Ca,Cl}$ (M = Na or K) and equilibrium constant $K_{sp}$ were evaluated in NaCl-$CaCl_2-H_2O$ and KCl-$CaCl_2-H_2O$ systems by least-squares optimization procedure, in which the single-salt Pitzer parameters of NaCl, KCl and $CaCl_2$ ${\beta}^{(0)}$, ${\beta}^{(1)}$, ${\beta}^{(2)}$ and $C^{\Phi}$ were directly calculated from the literature. The results obtained were in good agreement with the experimental data.

Winemaking from New Wild Grape (개량머루를 이용한 발효제품의 제조)

  • 김성렬;김승겸
    • The Korean Journal of Food And Nutrition
    • /
    • v.10 no.2
    • /
    • pp.254-262
    • /
    • 1997
  • new wild grape(NWG) cultivated in north Kyungki province in Korea, was tested by analyzing the proximate and physicochemical components of fresh fruit, the chemical components and sensory evaluation of wines made from the grape. NWG contained about 10% seed, and about 70% of juice. Total sugar content, total acidity and pH of the fruit juice were 17.50, 1.14 and 3.48%, respectively. Tartaric acid and malic acid contents of the NWG juice were 0.396 and 0.509%, respectively. Ethanol fermentation of the NWG by Saccharomyces cerevisiae Montrachet was rapid. The ethanol content, total acidity and pH of pink wine made from the NWG juice showed 11.88, 0.85 and 3.55%, respectively. Tartaric acid and malic acid contents of pink wine were 0.208 and 0.421%, respectively. Total anthocyanin content(A520) and color intensity(A520+A420) of pink wine were 5.46 and 9.39, showing greatly higher total anthocyanin content and color intensity than those of European red wines. Total phenol contents of NWG wine were 2, 300~3, 800mg/$\ell$. The pink wine made from the fruit juice was better than the red wine in their quality parameters and sensory scores.

  • PDF

Standardization and HPTLC Fingerprinting of a Polyherbal Unani Formulation

  • Beg, Mirza Belal;Viquar, Uzma;Naikodi, Mohammad Abdul Rasheed;Suhail, Habiba;Kazmi, Munawwar Husain
    • CELLMED
    • /
    • v.11 no.1
    • /
    • pp.4.1-4.8
    • /
    • 2021
  • Background: The Unani system of medicine has been practised since centuries for the treatment of a range of diseases. In spite of their efficacy they have been widely criticised due to the lack of standardization and poor quality control. Standardization of Unani medicine is a valuable issue at the present because they are very prone to contamination, deterioration, adulteration and variation in composition due to biodiversity as well as careless collection. Objective: To Standardize and Development of HPTLC Fingerprinting of a polyherbal Unani formulation Qurs-e-Safa. Materials and methods: The conventional and modern analytical techniques were used to standardise Qurs-e-Safa. The study was carried into three different batches of Qurs-e-Safa prepared with its ingredients. The parameters studied are organoleptic, microscopic, physicochemical parameters, phytochemical screening, TLC, HPTLC profile, aflatoxin, microbial load and heavy metal analysis. Results and conclusion: Qurṣ-e-Sa'fa is dark yellow in colour and aromatic smell. Uniformity of diameter and weight variation were found to be 13 ± 0, and 524.7 ± 1.72 mg. friability, hardness and disintegration time of all 3 batches were found to be (0.0615 ± 0.004, 0.0885 ± 0.0047 and 0.0725 ± 0.0058), (3.5 ± 0.2886, 3.67 ± 0.1674 and 3.67 ± 0.1674) and (16 to 17 minutes). Extractive value were found to be maximum in distilled water (38.488 ± 0.20, 37.3824 ± 0.38 and 39.8177 ± 0.13) followed by alcohol (27.5406 ± 0.54, 27.5656 ± 0.32 and 26.9229 ± 0.25). Loss of weight on drying, pH, total ash, acid insoluble ash, qualitative test was set in. Phytochemical screening revealed the presence of Carbohydrates, Phenols, Resins, Proteins, Steroids, fixed oil and Flavonoids. The microbial load was found absent and heavy metals were within permissible limits. The data evolved from the study may serve as a reference to validate and also help in the quality control of other finished products in future research.

Product Characteristics as Factors of Process Parameters in Starch Phosphates Preparation by Twin-screw Extruder (이축압출성형기로 인산전분 제조시 Process Parameters에 따른 제품의 특성)

  • Kim, Chong-Tai;Kim, Dong-Chul;Kim, Chul-Jin;Kim, Hae-Sung
    • Korean Journal of Food Science and Technology
    • /
    • v.23 no.2
    • /
    • pp.235-240
    • /
    • 1991
  • Starch phosphates were prepared from the corn starch mixed with 2% sodium tripolyphosphate by twin-screw extruder with a feed rate of 20 kg/hr and an extrusion temperature of $130^{\circ}C$, and the effects of extrusion variables on the physicochemical properties (target parameters) of starch phosphates were investigated. Interrelations of system parameters (specific mechanical energy and extrudate moisture) and rheological properities of starch was analyzed by using the response surface analysis. Degree of substitution (DS) was increased with increasing the feed moisture, and showed the maximum value at the screw of near 250 rpm, Degree of gelatinization was proportionally increased with increasing the screw speed and decreasing the feed moisture. Apparent viscosity of the paste was increased with increasing the feed moisture, but it was not significantly affected by the screw speed. It was found by scanning electron microscopy that the starch microgranules were much more degradaded, and as consequent result, the intrinsic viscosity was decreased, whereas, water solubility index was increased. The rate of retrogradation of the gels was retarded with increasing DS and decreasing viscosity.

  • PDF