• 한국의상디자인학회지
• /
• 제20권4호
• /
• pp.163-174
• /
• 2018

Consumer and property evaluation of wetsuit materials were conducted to obtain useful data for developing competitive products that meet consumer expectations and improving industrial competitiveness. Data were collected through online surveys of 213 domestic consumers who have experienced wearing wetsuit among marine leisure activities. Five types of commercial wet suit materials by brand and four types of commercial wet suit materials with the same quality by thickness were collected. Then, their physical properties, salt water resistance and thermal insulation rate were evaluated and compared. As a result, the most commonly used wetsuit material is 3 to 5 mm thick, and the basic jersey material is bonded on both sides. As a processing for imparting functionality, processing for improving warmth and reducing surface resistance are most frequently used. Consumers often feel uncomfortable when wearing a wetsuit, such as wearing comfort, weight, ease of movement, stretchability, and clothing pressure, which are different from those of casual wear. Also, mechanical strength and warmth were considered to be the most important criteria for selection of wetsuit material for purchase or rental. The mechanical properties of brand A and B were better than those of brand C, D, and E. Resilience and thermal shrinkage were better in brand C, D, and E. On the other hand, there was no significant difference in the physical properties due to the difference in thickness of the material at the same quality. Also, it was found that the thicker the material, the more stable it is in the heat. Brand A and B had superior salt water resistance than brand C, D, and E. In the thermal insulation test, brand A and B showed better insulation characteristics than brand C, D, and E, but the types of bonded fabric and surface finishing of materials were thought to have affected. In comparison of the thickness, the thicker the materials, the better the salt resistance and the thermal insulation.

• 한국건설순환자원학회논문집
• /
• 제8권4호
• /
• pp.553-561
• /
• 2020

국내 건축 구조물 방수재료 중 하나인 수용성 고무 아스팔트계 도막 방수재는 주로 실내(화장실, 주방, 배란다 등)에 많이 사용되고 있다. 일반적으로 아스팔트계열의 재료는 검은색의 기본 채도를 벗어나지 못하여 노출용보다는 비노출용으로 많이 쓰이고 있으며, 수용성 고무 아스팔트계 도막방수재의 경우는 기본적으로 낮은 물성 때문에 실내로 한정하여 적용하고 있다. 이에 인장 및 신장성 향상을 위하여 실란커플링제와 무기필러, 프로세서 오일 넣어 물성을 향상시켰고, 이에 따라 실외 도막방 수재 품질기준과의 기초 물성을 분석하였다. 그 결과 노출용 품질기준과 비교한 수용성 고무 아스팔트 도막방수재는 시험 평가가 진행된 전 항목에서 실리콘 고무계의 기본 물성 품질기준을 상회하는 결과가 나타났으나, 우레탄 고무계 1류의 인장강도 및 인열강도 클로로프렌 고무계 인열강도 품질기준 대비 성능이 약 34.2%에서 약 40.8% 정도 부족한 것으로 나타났다.

• 터널과지하공간
• /
• 제25권5호
• /
• pp.435-449
• /
• 2015

풍촌석회암과 막골석회암을 대상으로 $-18{\sim}+32^{\circ}C$의 온도범위에서 총 50회의 인공적인 동결-융해 풍화시험을 수행하고 그로 인한 물리적 성질과 미세구조의 변화를 정량적으로 분석하였다. 두 가지 암종 모두 건조무게와 P,S파 속도는 지속적으로 감소하는 경향을 보였고, 흡수율은 증가하는 경향을 보였다. X선 단층촬영 영상분석 결과 실험 후 공극률이 증가하였으며, 공극부피, 등가직경, 국부두께, 방향성 등 여러 지표에서 공극의 생성 및 확장을 확인할 수 있었다. 막골석회암의 물리적 미세구조적 변화가 풍촌석회암에 비해 크게 나타났는데 이는 초기 상태의 막골석회암이 더 많은 공극과 미세균열을 가지고 있었기 때문으로 추정된다. 본 연구는 암석의 물리적 성질과 미세구조적 성질을 통합적으로 분석함으로써 향후 암석의 풍화 연구에 적용될 수 있을 뿐만 아니라, 저온지역의 건설, 자원개발 활동에 기초자료로써 이용될 것으로 기대된다.

• 소성∙가공
• /
• 제27권5호
• /
• pp.301-313
• /
• 2018

In this paper, tensile test was performed on pure titanium sheet (CP Ti sheet) with HCP structure in each direction to evaluate mechanical and surface properties and analyze microstructural changes during plastic deformation. We also evaluated forming limits of Ti direction in dome-type punch stretching test using a non-contact three-dimensional optical measurement system. As a result, it was revealed the pure titanium sheet has strong anisotropic property in yield stress, stress-strain curve and anisotropy coefficient according to direction. It was revealed that twinning occurred when the pure titanium sheet was plastic deformed, and tendency depends differently on direction and deformation mode. Moreover, this seems to affect the physical properties and deformation of the material. In addition, it was revealed the pure titanium sheet had different surface roughness changes in 0 degree direction and 90 degree direction due to large difference of anisotropy, and this affects the forming limit. It was revealed the forming limit of each direction obtained through the punch stretching test gave higher value in 90 degree direction compared with forming limit in 0 degree direction.

• 수산해양기술연구
• /
• 제51권4호
• /
• pp.576-582
• /
• 2015

The efficiencies of thermal power system using fossil fuel depend on heat exchangers which extract energy from the exhaust gas before it is expelled to the atmosphere. To increase heat transfer efficiency it is very important to maintain the surface of heat exchanger as clean condition. The accepted skill of cleaning of fouled surface of heat exchanger is soot blowing. A high pressure jet of air is forced through the flat surface of plate to remove the deposit of fouling. There is, however, little knowledge of the fundamental principles of how the jet behave on the surface and how the jet actually removes the deposit. Therefore, the study focuses on the measuring of cleaning area and cleaning dwell time after accumulating the simulated deposit on the flat surface. The deposit test rig was built for the study and simulated deposit material is used after measuring the physical property of the each material by shearing stress test. Much data was obtained for the analysis by the parameters change such as the different jet speed, different inner pressure and variable distance of the jet from the test rig surface. The experimental data was compared with the theoretical equation and most of the data matches well except some extreme cases.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.135-143
• /
• 2002

This study is to investigate its use by applying stainless steel wire mash reinforcement method of construction, which is newly developed, on the high strength concrete beam mixed with polymer-steel fiber. In this test, it is investigated and observed such as follows: the ultimate load, the initial flexure crack load, the initial diagonal tension crack load, the relation between load and deflection, load-strain relation, and also crack growth and fracture aspect by increasing load. The results of this test are; first, the stainless steel wire showed some useful reinforcement effects in multiplying the steel's resisting force of moment to the tensile force of beam or slab: second, the promoting strength and internal force was made in the process of the integration at the same reaction by using the penetrating polymer-mortar with an excellent durability and physical property. On the basis of this results, because such instances in applying stainless steel wire Mash reinforcement method of construction have been few so far, through the experimental investigation such as this test over and over again, the efficient and useful method must be developed for the practice.

• Elastomers and Composites
• /
• 제43권3호
• /
• pp.173-182
• /
• 2008

고무나 우레탄과 같은 고 탄성력을 이용하여 튜브를 임의의 형상으로 성형하는 고 탄성체 성형방법은 타 공정에 비해 높은 치수 정밀도와 생산 공정의 단축, 에너지 절감 등을 기대할 수 있는 차세대 성형기술이라 할 수 있다. 본 연구에서는 탄성체에 대한 소재 물성시험과 특성평가를 통해 고 탄성체 성형에 적합한 소재를 선정하고 시험으로 얻어진 응력-변형률을 이용하여 비선형 재료상수를 결정하여 성형해석에 필요한 물성 데이터를 확보하였다. 또한, 랙튜브에 대한 유한요소해석을 통해 탄성체의 두께변화에 따른 공정변수의 영향을 검토하였다.

• 수산해양기술연구
• /
• 제49권2호
• /
• pp.95-105
• /
• 2013

Physical characteristics of net filament were investigated to test the fishing capacity of gill nets due to the flexibility difference between nylon and biodegradable nets (PBS 95%+PBAT 5% and PBS 80%+PBAT 20%). In addition, a total of 16 fishing experiments were conducted in the coastal waters of Jeongja, Ulsan, from August 10 to October 20, 2011 and from September 11 to November 3, 2012. The test results showed that nylon net filament exhibited more flexibility than biodegradable net filament when they were wet. Accordingly, the longer submerged time, the more fishing capacity the nylon gill nets demonstrated in comparison with the biodegradable gill nets. A total of 16 species were caught in 2011 with the nylon gill nets (1,323 fishes, weighing 342,885g) and the biodegradable gill nets (958 fishes, weighing 236,857g). 15 species were caught in 2012 with the nylon gill nets (1,582 fishes, weighing 448,360g) and the biodegradable gill nets (1,431 fishes, weighing 406,590g). Thus catch weights and the number of fish caught produced by the nylon nets were 1.45 times and 1.38 times higher than those of the biodegradable nets produced in 2011, and 1.1 times and 1.11 times higher in 2012. A test on the target species, pointhead flounder (Cleisthenes pinetorum) has similar results. The flexibility of a net was proved to be related to the fishing capacity, and as a result, it is concluded that the higher flexibility, the higher fishing capacity.

• 한국재료학회지
• /
• 제23권6호
• /
• pp.344-352
• /
• 2013

First, a purified sludge was calcined at various temperatures viz. 800, 900, 1000, 1100 and $1200^{\circ}C$ per hour. Subsequently 100 wt% of ware from Geryong mountain was mixed with 5~25 wt% of a purified sludge. Then the ware was treated at $1250^{\circ}C$ in an electric kiln to test a bending strength. The physicochemical property of the prepared ware was characterized by XRD, Raman and SEM analysis. Among the different percentage, 25 wt% of a ware in a purified sludge calcined at $1000^{\circ}C$ showed 689 $kg/cm^2$ strength. Also the purified sludge calcined at $1000^{\circ}C$ was adequate physical properties than the other composites. Further to enhance the physical strength, 3 wt% $TiO_2$ (a mineralizer) was added into the ware and the strength was increased up to 731 $kg/cm^2$. The composites exhibit absorption and porosity rates of 0.17% and 0.39% respectively.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.501-506
• /
• 1997

This is to investigate the physical properties of the commercially available Soft, Thomas, Minerva, and Philadelphia cervical braces which are widely used in orthopedics, neurosurgery, and rehabilitation medicine clinics as assisting devices or physical stabilization of cervical vertebrates, to use as a basic data or designing new type brace. Tensile strengths were observed by universal mechanical measuring device and Thomas brace required the highest stress to break by tensile stress. Durabilities against continuous frictional forces were also determined, and Minerva brace demonstrated the longest frictional time until being perforated. and Thomas/minerva braces are superior to the other braces in the effect of the material property on the skin tissue, as the animal test. According to these results, polyethylene is recommendable as a frame and preparation of pores in the material is favorable to provide ventilation to skin.