• 한국제4기학회지
• /
• 제21권1호
• /
• pp.1-14
• /
• 2007

이 연구에서는 금강 지류하천에 발달한 구하상에 부존하는 잔골재의 물성실험을 실시하여 그 결과를 KS 품질기준과 비교하여 잔골재로서의 품질을 평가하였다. 연구 결과 봉황천의 상류에 발달한 구하상에는 하류에 비하여 상대적으로 입도가 큰 잔골재가 선별적으로 많이 분포하고 있으며, 봉황천 구하상에 부존하는 잔골재 물성은 기반암의 종류에 따라 크게 좌우되는 결과를 보여 준다. 즉, 기반암종이 동일하거나 유사한 소규모 수계일 경우 잔골재 물성은 퇴적물 입도와 상관관계가 높은 것으로 나타났다. 끝으로 봉황천 구하상 잔골재는 밀도와 잔입자량 이외에는 전반적으로 KS 규격기준에 잘 부합되는 것으로 나타났다.

• 지질공학
• /
• 제13권2호
• /
• pp.257-266
• /
• 2003

본 연구에서는 포천, 거창, 합천 지역에 분포하는 주라기 화강암을 대상으로 미세균열 분포특성이 화강암의 물성과 역학적 이방성에 미치는 영향에 대하여 관찰하였다. 15종의 방향성 공시체를 대상으로 한 물성시험결과를 살펴보면 공극률과 흡수율은 대체로 비례하는 것으로 측정되었다. 또한 이들 공시체를 대상으로 한 P파 속도의 분포특성을 살펴보면 hardway에 수직한 H축 방향에서 고속도이고, rift에 수직한 R축 방향에서 저속도를 보인다. 3축에 평행하게 제작된 암석 공시체를 대상으로 압축강도시험을 실시하였으며, 강도는 미세균열들의 방향별 발달정도와 밀접한 관계를 보이고 있다.

• 한국포장학회지
• /
• 제7권2호
• /
• pp.43-51
• /
• 2001

This study was carried out to analyze changes of the physical properties of corrugated fiberboard boxes for fruits packaging by various moisture and temperature changes. There were significant decrease in burst strength with increased relative humidity. And also compressive strength(ring crush test) of corrugated fiberboard and box were reduced with moisture content. The decreasing amounts of single wall(SW) corrugated fiberboard was bigger than that of double wall(DW). The physical properties reductions of corrugated fiberboard and box were mainly affected by relative humidity. Therefore, it is suggested that development of the water-resistant corrugated fiberboard and box be useful under the condition of low temperature and high relative humidity such as the cold chain system.

• 터널과지하공간
• /
• 제19권4호
• /
• pp.328-338
• /
• 2009

암석 물성을 간접적으로 추정하기 위한 방법으로 슈미트 해머 타격법이 보편화되어 있다. 그러나 보고된 대부분의 방법들은 단일 타격법으로 오차를 많이 내포하고 있으며 연속 타격법의 경험식도 자료 처리방법에 불합리한 점들이 많아 범용하기 어려운 실정이다. 본 연구에서는 기존의 ASTM, ISRM, BSI, Poole와 Farmer 및 Hucka의 방법들을 검토하고, 국내에서 출토된 150개의 화성암, 변성암 및 퇴적암을 대상으로 시험을 시행하여 이들 방법들의 불합리한 점들을 수정, 보완하여 최적의 시험방법과 새로운 자료 처리방법을 제시하였다.

• 센서학회지
• /
• 제21권2호
• /
• pp.103-108
• /
• 2012

Radiofrequency(RF) signal is a key medium to the most of the present wireless communication devices including RF identification devices(RFID) and smart sensors. However, the most critical barrier to overcome in RFID application is in the failure rate in detection. The most notable improvement in the detection was from the introduction of EPC Class1 Gen2 protocol, but the fundamental problems in the physical properties of the RF signal drew less attention. In this work, we focused on the physical properties of the RF signal in order to understand the failure rate by noting the existence of the ground planes and noise sources in the real environment. By using the mathematical computation software, Maple, we simulated the distribution of the electromagnetic field from a dipole antenna when ground planes exist. Calculations showed that the dark area can be formed by interference. We also constructed a test system to measure the failure rate in the detection of a RFID transponder. The test system was composed of a fixed RFID reader and an EPC Class1 Gen2 transponder which was attached to a scanner to sweep in the x-y plane. Labview software was used to control the x-y scanner and to acquire data. Tests in the laboratory environment showed that the dark area can be as much as 43 %. One who wants to use RFID and smart sensors should carefully consider the extent of the dark area.

• 한국의류학회지
• /
• 제6권2호
• /
• pp.9-15
• /
• 1982

This study was conducted to examine the relation between the clothing materials and the garment's ease under wearing condition. Wearing test of slacks in the same pattern which were made of 3 woven fabrics and 1 knitted fabric have teen carried out. Subjects were 5 female students. Some physical properties of these fabrics were investigated. The following results were obtained. 1, By analysis variance with the results of sensory test which was tested by paired com-parison method, it was obtained that the effect of materials on the garment's ease were significant at the $1\%$ level on every part of stacks and posture of subject. It indicates that there is a difference of materials from materials in garment's ease. 2. Significant at the $5\%$ level among the materials. Jersey and Jean were looser than the other two materials. Clothing materials have considerable effect on the garment's ease of slacks, therefore it was noticed that the ease of slacks must have considered the clothing materials. It is more necessary in working dress. 3. Elastic recovery of width was more contributive to garment's ease of slacks than any other physical properties.

• 한국미생물·생명공학회지
• /
• 제24권5호
• /
• pp.546-552
• /
• 1996

The applicability of chitosan, a biodegradable natural polymer, as the coating material to prevent the dispersal of the spores of the apple white rot agent Botryosphaeria dothidea, was investigated. The physical properties of mixed chitosan/polyvinyl alcohol(PVA) film showed the increased physical properties for film formation, such as tensil strength, elongation, and viscosity, compared to either chitosan or PVA film. The FT-IR spectra of chitosan/PVA film indicated that the film was formed by simple blending not by any new synthetic bond. The chitosan and chitosan/PVA film showed effective antifungal activity on B. dothidea. The formed films were well decomposed by ASTM strains used for biodegradability test, on the other hand, the PVA film could not be decomposed by above standard strains. The field test at apple orchard showed that the dispersal of B. dothidea spores could be effectively reduced by coated film, especially by chitosan/PVA film. The spore dispersal was reduced upto 97.0% by 1.0% chitosan/5.0% PVA film during 4 months.

• 복식문화연구
• /
• 제12권6호
• /
• pp.945-952
• /
• 2004

Shrink-resist effects and properties of the knitted fabrics from wool/acrylic(W/A) fiber blends were determined to find out an optimal blending ratio keeping the quality properties of wool products. The test fabrics were knitted by a weft knitting machine with all needle knitting structure ($0{\times}0$ rib) under the same knitting conditions with five different types of yarns: $W100\%,\;A100\%$, and W/A blended yarns(70/30, 50/50, 30/70). Shrinkage during repeated washing, electrostatic propensity, thermal resistance and pilling propensity of W/A knits. The shrink resistance was significantly enhanced on repeated washing of W/A knits, especially, over $50\%$ acrylic blended knits. Addition of strong physical force and alkali detergent applied in this washing experiment brought about superior effects with the low shrinkage rate although it was very severe washing conditions for wool fabrics. The results from the washing experiment implies that W/A blend knits can be machine washed at individual households with other ordinary laundry. There was some changes and variation found in thermal resistance, electrostatic propensity, and pilling. W/A 50/50 blended knits did not bring serious changes to other physical properties comparing with original wool, which helps consumers care wool knitted clothes more conveniently.

• 공업화학
• /
• 제25권6호
• /
• pp.639-644
• /
• 2014

국내 자동차사는 순정엔진오일을 정해놓고 일반엔진오일보다 높은 가격으로 판매하고 있다. 본 연구에서는 국내 순정엔진오일 14종과 동급의 일반엔진오일(KS제품) 14종에 대하여 품질비교 및 차량을 이용하여 10,000 km씩 주행한 뒤, 회수된 엔진오일의 물성을 분석하였다. 분석 결과, 사용하지 않은 신유는 순정엔진오일과 일반 엔진오일의 품질이 대동소이하였지만, 오히려 주행 후 회수된 일반엔진오일은 순정엔진오일에 비해 윤활성이 우수하였으며, 동점도와 전산가 변화가 작은 것으로 나타났다.

• 한국응용과학기술학회지
• /
• 제25권1호
• /
• pp.1-14
• /
• 2008

To prepare weather-resistant modified silane acrylic resin coatings for an architectural purpose, tetrapolymers were synthesized by radical polymerization. 3-Methacryloxypropyltrimethoxysilane (MPTS) as a silicone monomer and n-butyl acrylate, methyl methacrylate, and n-butyl methacrylate as acrylic monomers were used. The composition of monomers was adjusted to fix the glass transition temperature of acrylic polymer for $20^{\circ}C$. The composition of MPTS in the synthesized polymer were varied from 10 wt% to 30 wt%. On the basis of synthesized resin amber paints were prepared and their physical properties and effects on weatherability were examined. The presence of MPTS in modified silane acrylic resins generally resulted in low molecular weight and broad molecular weight distribution, and also lowered the viscosity of the copolymers. The coated films prepared from these resins showed good and balanced properties in general. Adhesion to the substrate was outstanding in particular. Weatherability tests were carried out in three different types such as outdoor exposure, QUV, and SWO. The test results showed that the modified silane acrylic resins containing 30 wt% of MPTS had superior weathering properties.