Tunnel and Underground Space (터널과지하공간)

Korean Society for Rock Mechanics and Rock Engineering (한국암반공학회)
권호 표지

Suggestions for a New Method of Schmidt Hammer Blowing and Data Analysis on Rocks (I)

암석을 대상으로 시행하는 Schmidt Hammer 타격법의 새로운 제안 (I)

  • 민덕기 (울산대학교 공과대학 건설환경공학부) ;
  • 문종규 (동명기술공단(주)) ;
  • 이상일 (한국농어촌공사 감사실)
  • Published : 2009.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Schmidt hammer test as an indirect method has so far been widely applied for determining the physical properties of intact rock, and many researchers have developed procedures for its use on rock cores, blocks and in field. Though many methods have developed upto date for indirect using, the almost were single blow which has many errors. The purpose of this study was to evaluate the established as for ASTM, ISRM, BSI, Poole & Farmer and Hucka method and to suggest a new optimum test method and statistical analysis on rocks. The finding has indicated that succeeding blow has served as an optimal to predict physical properties of rocks. To conduct the experiment, researchers have examined 150 rock blocks, which include igneous, metamorphic and sedimentary rocks in Korea nation wide.

암석 물성을 간접적으로 추정하기 위한 방법으로 슈미트 해머 타격법이 보편화되어 있다. 그러나 보고된 대부분의 방법들은 단일 타격법으로 오차를 많이 내포하고 있으며 연속 타격법의 경험식도 자료 처리방법에 불합리한 점들이 많아 범용하기 어려운 실정이다. 본 연구에서는 기존의 ASTM, ISRM, BSI, Poole와 Farmer 및 Hucka의 방법들을 검토하고, 국내에서 출토된 150개의 화성암, 변성암 및 퇴적암을 대상으로 시험을 시행하여 이들 방법들의 불합리한 점들을 수정, 보완하여 최적의 시험방법과 새로운 자료 처리방법을 제시하였다.

Keywords

References

  1. 민덕기, 문종규(2006), 'Schmidt hammer 반발지수로 울산지역 퇴적암의 공학적 특성을 추정하기 위한 연구', 한국지반 공학회 논문집, 제22권, 제10호, pp.139-150
  2. 민덕기, 문종규(2006), '울산지역 퇴적암의 강도 추정법연구', 한국지반 공학회 논문집, 제22권, 제8호, pp.63-75
  3. 민덕기, 문종규, 노재술(2008), 'Brazilian 시험을 이용한일축압축강도, 탄성계수의 추정(1)', 한국지반 공학회논문집, 제24권 제10호, pp.131-146
  4. 정형식, 유병옥(1997), '암석의 풍화에 따른 강도 변화특성 및 강도추정에 관한 연구', 한국지반 공학회 논문집, 제13권, 제6호, pp.71-91
  5. 이영남, 윤지선, 김두영(1993), 'Rock Test Hammer 측정결과의 활용에 관하여', 한국암반역학회, 터널과 지하공간, Vol.3, pp.167-174
  6. 이수곤, 이송(1995), '슈미트 해머 수치를 이용한 한국화강암의 일축 압축강도 추정방법', 대한토목학회 논문집, 제15권, 제2호, pp.199-210
  7. 이영휘, 김용준, 박준규(2000), '압축 강도와 풍화도에 관련된 퇴적암의 공학적 특성',한국지반공학회 논문집, 제16권, 제1호, pp.5-17
  8. 한국암반공학회(2007),'암석의 슈미트 반발경도 결정 표준시험법'. 터널과 지하공간, 제17권, 제6호, pp.1-3
  9. ASTM D 2938-95, 'Standard test method for unconfined compressive strength of intact rock core specimens', Annual Book of ASTM Standards 2005
  10. ASTM D 4543-04, 'Practices for preparing rock core specimens and determining dimensional and shape tolerances', Annual Book of ASTM Standards 2005
  11. ASTM D 5873-05, 'Test method for determination of rock hardness by rebound hammer method', Annual Book of ASTM Standards 2005
  12. Aufmuth, R.E. (1974), 'A systematic determination of engineering criteria for rock', Bull. Ass. Eng. Geol., Vol.6, No.3, pp.235-245 https://doi.org/10.1007/BF02082889
  13. Beverly, B.E., Schoenwolf, D.A., Brierly, G.S. (1979), 'Correlations of rock index values with engineering properties and the classification of intact rock'
  14. Barton, N., Choubey, V. (1977), 'The shear strength of rock joints in theory and practice', Rock Mech., Vol.10, pp.1-54 https://doi.org/10.1007/BF01261801
  15. BSI (BS4408), British Standard Index, 1971
  16. Deere, D.U., Miller, R.P. (1966), 'Engineering classification and index properties for intact rocks', Tech. Report, Air Force Weapons Lab. New Mexico, No. AFNL-TR. Kirtland.,pp.65-116
  17. Day, M.J., Goudie, A.S. (1977), 'Field assessment of rock hardness using the Schmidt test hammer', Br. Geomorphol Res. Group Tech. Bull, Vol.18, pp.19-29
  18. Duncan,N. (1969), 'Engineering Geology and rock mechanics', London,Leonard Hill, Vol. 1
  19. Fowell, R.J., McFeat Smith, I. (1976), 'Factors influencing the cutting performance of a selective tunnelling machine', In Jones, J.M. editor. Proceedings of the International Sympogium on Tunnelling '76, London : IMM; pp.301-309
  20. Goktan, R.M., Gunes, N. (2005), 'A comparative study of Schmidt hammer testing procedures with reference to rock cutting machine performance prediction', Int. J. Rock Mech. and Min. Sci., Vol.42, pp.466-472 https://doi.org/10.1016/j.ijrmms.2004.12.002
  21. Haramy, K.Y., DeMarco, M.J. (1985), 'Use of Schmidt hammer for rock and coal testing', Proc. 26th. U. S. Symp. Rock Mech., pp.549-555
  22. Hucka, V. (1965), 'A rapid meth-odfor determining the strength of rocks in situ', Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol.2, pp.127-134 https://doi.org/10.1016/0148-9062(65)90009-4
  23. Inoue, M., Omi, M., (1970), 'Study on the Strength of Rock by the Schmidt Test Hammer', Rock Mechanics, Japan, Vol.1, pp.177-179
  24. ISRM (1979),'Suggested methods for determining the uniaxial compressive strength and deformability of rock materials', Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol.16(2), pp.135-140
  25. ISRM (1981), 'The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring : Commission on Testing Methods', Int.l Soc. Rock Mech. pp.628-633
  26. ISRM (2009), 'ISRM Suggested method for determination of the Schmidt hammer rebound hardness : Revised version', Int. J. Rock Mech. & Min. Sci. Vol.46, pp.627-634 https://doi.org/10.1016/j.ijrmms.2008.01.020
  27. Kahraman, S. (2001), 'Evaluation of simple methods for assessing the uniaxial compressive strength of rock', Int. J. Rock Mech. Min. Sci., Vol.38, pp.981-994 https://doi.org/10.1016/S1365-1609(01)00039-9
  28. Katz, O., Reches, Z., Reogiers, J.C. (2000), 'Evaluation of mechanical rock properties using a Schmidt hammer', Int. J. Rock Mech. Min. Sci., Vol.37, pp.723-728 https://doi.org/10.1016/S1365-1609(00)00004-6
  29. Kazi, A., Al-Mansour, Z.R. (1980), 'Empirical relationship between Los Angeles Abrasion and Schmidt hammer strength tests with application to aggregates around Jeddah', Q. J .Eng. Geol., London, Vol.13, pp.45-52 https://doi.org/10.1144/GSL.QJEG.1980.013.01.03
  30. Poole, R.W., Farmer, I.W. (1978), 'Geotechnical factors affecting tunnelling machine performance in coal measures rocks', Tunnels Tunnelling, pp.27-30
  31. Poole, R.W., Farmer, I.W. (1980), 'Consistency and repeatability of Schmidt hammer rebound data during field testing', Int. J. Rock Mech. Min. Sci. & Geomech. Abstr.,Vol.17, pp167-171 https://doi.org/10.1016/0148-9062(80)91363-7
  32. Schmidt, E. (1951), 'A non-destructive concrete tester', Concrete, Vol.59, No.8, pp.34-35
  33. Shorey, P.R., Barat, D., Das, M.N., Mukherjee, K.P., Singh, B. (1984), 'Schmidt hammer rebound data for estimation of large scale in situ coal strength', Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., Vol.21
  34. Singh, R.N., Hassani, F.P., Elkington, P.A.S. (1983), 'The application of strength and deformation index testing to the stability assessment of coal measures excavations', Proc. 24th. US Symp. on Rock Mech., Taxas A & M Univ., AEG, pp.599-609
  35. Xu, S., Grasso, P., Mahtab. (1990), 'Use of Schmidt hammer for estimating mechanical properties of weak rock', Proc. 6th. Int. IAEG Congress, Vol.1, pp.511-519