• 공업화학
• /
• 제27권3호
• /
• pp.259-264
• /
• 2016

본 연구에서는 norbonene dialkyl ester 6종을 isoprene rubber에 적용하여 내분비계 교란물질인 DEHP에 대한 대체 가능성을 평가하였다. IR 시편은 isoprene rubber (IR)와 norbonene dialkyl ester, 가황제 등을 배합하여 제작하였으며, 토크값, 스코치 시간, 최적가황시간, 무니점도를 측정하여 가공성을 평가하였고, 경도, 인장강도, 100% modulus, 신율 등물성을 평가하여 이를 DEHP를 적용한 경우와 비교하였다. 그 결과 토크 값의 경우 최저토크, 최대토크 모두 DEHP 보다 낮거나 유사한 값을 나타내었고, 스코치 시간, 최적가황시간은 DEHP보다 같거나 길게 측정되었다. 무니점도는 DEHN이 낮은 값을 나타내어 DEHP를 첨가한 경우보다 가공성이 우수함을 확인하였다. 경도와 열적 특성의 경우 norbornene계 화합물이 DEHP와 같거나 유사한 경향을 보였다. 인장특성의 경우 선형의 알킬기를 가진 norbornene계 화합물을 적용한 경우가 우수함을 확인하였다.

• 한국건설순환자원학회논문집
• /
• 제9권3호
• /
• pp.348-355
• /
• 2021

도로 포장에 널리 사용되는 아스팔트는 도로가 노출되는 환경에 따라 요구되는 물리적 특성이 상이하다. 이에 따라 첨가제의 배합에 따라 아스팔트가 어떤 물리적 특성을 나타내는지 평가하고 도로의 교통, 기후 환경에 맞추어 적절한 배합을 선택하는 것이 아스팔트 도로의 수명을 확보하기 위해 필수적이다. 아스팔트의 다양한 물리적 특성 중 소성변형에 대한 저항성을 측정하기 위해서는 Dynamic shear rheometer(DSR) 테스트를 주로 사용한다. 하지만 DSR 테스트는 실험 세팅에 따라 결과가 상이하고 특정 온도 범위 내에만 측정이 가능한 단점이 있다. 따라서 본 연구에서는 DSR 테스트의 단점을 극복하고자, Atomic force microscopy로부터 수집된 이미지를 학습하여 레올로지적 특성을 예측하고자 했다. 딥러닝 아키텍처 중 하나인 EfficientNet을 통해 이미지를 학습하였고 딥러닝 모델의 한계인 많은 데이터를 요구한다는 점을 극복하기 위해 전이학습을 이용하여 학습을 진행하였다. 학습된 모델은 이종의 첨가제를 사용하였음에도 높은 정확도로 아스팔트 바인더의 레올로지적 특성을 예측하였다. 특히, 전이학습을 사용하지 않았을 때와 비교하여 빠르게 학습이 가능했다.

• KIEAE Journal
• /
• 제7권4호
• /
• pp.135-140
• /
• 2007

In this study we settled the trouble of the MgO board of existence by this research. We changed the wooden one of the main ingredient of a board to a perlite and a mineral particle in the aluminum hydroxide group and proceeded with a study to physical character and fire resistance efficiency improvement. The result yellowing phenomenon could be improved and it was possible to reduce size decrease of pin hole and the frequency of occurrence. We found out that the in case of absorbed amount added 5~8% corresponding to the weight decreases the acrylic group emulsion suddenly. So this product is improved with the bending strength and water-resistance. After behavior stop time measurement of a mouse for experiments was measured at the time of a gas harmful effect test, an improved MgO board appeared more highly for an average of 138 seconds compared with a board of existence.

• 한국농공학회논문집
• /
• 제46권5호
• /
• pp.99-106
• /
• 2004

Although fly ash has possesses viable engineering properties, an overwhelming majority of fly ash from coal combustion is still placed in storage or disposal sites. This study was undertaken to investigate the physical and mechanical properties of clay-fly ash mixture and to furnish engineering data when fly ash utilized as engineering materials. This paper includes geotechnical properties of fly ash, clay-fly ash mixtures and results of compaction test, unconfined strength test, direct shear test, leaching test and stability analysis of clay-fly ash bank slope. If proper amount of fly ash was put in clay, the clay-fly ash mixture has an increase of unconfined strength and stability of bank slope.

• 펄프종이기술
• /
• 제39권2호
• /
• pp.54-59
• /
• 2007

Cereal, computer software, wine, small appliances, and fast foods are examples of products that have switched from folding carton to microflute corrugated paperboard. Microflute corrugated paperboards have their unique wonderful packaging characteristics that are driving forces for people to use more and more. Good strength property, excellent shock absorbing ability, and beautiful outer appearance of microflute corrugated paperboards go hand and hand with their environmental advantages. It is known that physical properties of microflute corrugated paperboards depend on not only properties of base paper but corrugator operating conditions. This study was carried out to investigate on the corrugator's optimum operating conditions for making micro flute corrugated paperboards. Lab-scaled micro flute corrugator was installed and run with systematic changes of operation conditions to investigate the effects of operation conditions on physical properties of micro flute corrugated paperboards.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.172-177
• /
• 1999

In this paper, the physical and electrical properties of the synthetic fluids No. 2 class Ⅶ used the insulating oils for automobile ignition coil are studied. Also, benzotriazole(BTA) as the streaming electrification suppressant additive is added to the oil, and the change of physical and electrical properties due to different BTA concentration is investigated. To investigate the electrical characteristics, the breakdown strength of each specimen by an experiment for AC breakdown and the changes of conductivity by measuring volume resistivity are analyzed. It is considered that the effective content of BTA as charge suppressant additive is about 10[ppm] from the results of AC breakdown and volume resistivity test.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1353-1358
• /
• 2008

An elementary particle of bottom ash is similar to fine sand. so which expected from replace expensive sand. Especially, If using for improvement of soft ground, It will need of study about strength, permeability and environment of the bottom ash. In this study, the bottom ash operate of physical quality, direct shear test and triaxial compression test so analyze and compare with standard sand.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1483-1486
• /
• 2004

Purpose of this paper is to accummulate database of automotive steel sheet from mild steel to high strength steel in cold rolled steel sheets. Physical properties, mainly mechanical properties, of steel sheet are tested and all data are arranged to one sheet. Methods of test are composed of FLD, tensile strength test, chemical composition, surface roughness and product conditions. Finally this database will be helpful to automotive body designers and die designers to design automotive body parts and tools in a material point of view.

• 대한조선학회논문집
• /
• 제40권1호
• /
• pp.55-62
• /
• 2003

This study has investigated physical and chemical properties of FRP waste, has manufactured polymer cement mortar using a crushed waste with sand and has evaluated its capability to develop the economical waste recycling technology. The study has investigated tension strength, hardness test and impact test as physical properties and also thermogravimetric characteristics and analyzed infrared spectroscope as chemical properties. Then the study has manufactured polymer cement mortar and has analyzed how the FRP waste fine aggregate replacement ratio has an effect on compression strength. Noticing admixture can complement strength drop occurred by the FRP waste fine aggregate replacement, the study examined an optimum rate of admixture addition and its reaction through electron microscope photos.

• Journal of Ceramic Processing Research
• /
• 제20권4호
• /
• pp.363-371
• /
• 2019

In this study, physical properties of normal concrete, magnetite concrete, EAF concrete, and EAF concrete with added iron powder were evaluated and a feasibility of radiation shielding is also evaluated through irradiation tests against X-rays and gamma-rays. While the unit weight of EAF concrete (3.21 t/㎥) appeared lower than that of magnetite concrete (3.50 t/㎥), the results in compressive strength of EAF concrete were greater than those in magnetite and normal concrete. While the radiation transmission rate of normal concrete reaches 26.0% in the X-ray irradiation test, only 6.0% and 9.0% of transmission rate were observed in magnetite concrete and linear relationship with unit volume weight and radiation shielding. In the gamma-ray irradiation test, the performance of EAF and magnetite concretes appeared to be similar. Through the results on the excellent physical properties and radiation shielding performance a potential applicability of EAF concrete to radiation shielding was verified.