• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.2
• /
• pp.131-137
• /
• 2002

Purpose: To evaluate and compare the functional results, activity status, and anterior stability between conservative group with partial ACL injury and reconstruction group with bone-patellar ten-don-bone autograft in ACL total rupture. Materials and Methods: Thirty-eight patients with ACL injury were diagnosed and treated with arthroscopy and followed for more than two years. The number of patients with partial injury was 12(mean age; 38.3) and reconstruction group was 26 (mean age; 25.3). Objective stability was estimated under anterior loading of 15 lb and 20 lb by KT-2000 Arthrometer (MED metric, USA). Functional evaluation using Lysholm score and Tegner activity score were performed. Results: Average functional score of Lysholm was 88.5 in partial injury group and 89.3 in reconstruction group. Average score of Tegner was 5.3 in partial injury group and 5.1 in reconstruction group(P<0.05).Average anterior displacement compared with normal side. Under loading of 20lb, 1.7$\pm$4.3 mm in partial injury group, 2.3$\pm$1.9 mm in reconstruction group were anterior displaced (P<0.05). Under loading of 15lb, 1.2$\pm$1.0 mm in partial injury group, 1.4$\pm$1.5 mm in reconstruction group were dis-placed (P<0.05). There were giving way, effusion, instability and anterior knee pain in complication. Giving way was the frequent complication in the partial injury group. Conclusions: Clinical results of both group were similar. Functional evaluation of Lysholm was good and status of Tegner activity was maintained to physical fitness activites (jogging, regular bik-ing) in both groups on average. The results of conservative treatment for the partial ACL injury (less than 50$\%$) was satisfactory and equivalent to that of reconstructive treatment for the total ACL injury.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.2
• /
• pp.154-158
• /
• 2002

Purpose: To compare the results of open and arthroscopic method in recurrent anterior should erinstability. Materials and Methods: The 68 patients who have been taken the open or arthroscopic Bankartrepair for the period of Jan. 1995 to April. 2000. One group (23 patients) had elected an arthroscopic Bankart repair, the other group (45 patients) had chosen open stabilization. Patients were followed up12 to 63 months (ave. 34 months) after surgery. Results: We found 2 cases of subluxation out of open repair group, and then treated by conservative method. There were another 2 cases of dislocation and 2 cases of subluxation out of arthroscopicrepair group, and we have taken out 1 case of reoperation by open method. Using the functional scales by Rowe, the patients who have taken the open method posted at the average point of 87, while the arthroscopic method posted 85 points. Patients satisfaction points were 84.6 and 72.5 respectively. There were no criteria of statistically significant except stability and motion score. Conclusion: Open Bankart repair would be better in stability, and arthroscopic method in ROM gain. Proper patient selection based on physical examination and arthroscopic inspection to optimize the indications contributed to successful treatment.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.2 no.1
• /
• pp.18-23
• /
• 2009

Purpose: To evaluate the relationship between the real pathology & abnormal finding found by ultrasonography. Without an MRI test being done beforehand, an arthroscopy is done after an ultrasonography to show abnormal lesions during a knee abnormality. Materials and Methods: The subjects were 42 patients out of 49 cases, excluding those with rheumatoid arthritis, septic arthritis and patients suspected with a ligament tear, which were examined by ultrasonography alone before receiving a knee arthroscopy in our hospital from July 2007 to July 2008. In every case, a physical examination, simple X-ray and knee ultrasonography was done. An arthroscopy was performed when there was ultrasonographic abnormal finding. Before the procedure, a MRI test was not performed and when abnormal findings were found by an arthroscopy, an appropriate surgery was done. Results: During the ultrasonographic examination, there were various sized effusions in the suprapatellar pouch. Also, in addition there were eleven cases of medial meniscus abnormalities, sixteen cases of lateral meniscus abnormalities, and two cases of cystic lesions. Throughout the arthroscopic examination, there were 14 cases of medial meniscus abnormalities, 20 cases of lateral meniscus abnormalities, 15 cases of cartilage damages, 9 cases of medial pathologic plica, 2 cases of intra-articular loose bodies, 5 cases of chondromalacia, 2 cases of cyst, and 2 cases of synovitis. When an effusion abnormality was found by the ultrasonography in a suprapatellar pouch, there was a 100% probability of knee pathology. When a medial meniscus abnormality was found with an ultrasonography, there was a 90.9% probability of a real pathology. When a lateral meniscus abnormality was found there was 81.2% probability of a real pathology. Ultrasonography was 100% accurate when it came to cystic lesions. Conclusion: Knee ultrasonography performed before an arthroscopy seems to be a very useful examination method when suspecting intra-articular lesions.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.3 no.2
• /
• pp.54-58
• /
• 2010

Purpose: In patients with chronic cervical pain, the facet joint is the source of the majority. Due to the difficulty of identifying the exact location of the joint that causes these symptoms, the possibility of complications and the placebo effect brings clinical application into question. In this study, we assessed the prevalence of patients with chronic cervical pain and report the diagnostic and therapeutic usefulness of ultrasonography - guided facet joint block therapy. Materials and Methods: Patients with nonspecific chronic cervical pain for more than 6 months were selected. Patients with disc herniation, sciatica-related pain were excluded from the study and 160 patients who failed in conservative treatment (physical therapy, chiropractic therapy, medication) were included in the study. Diagnostic Ultrasonography-guided facet joint block was performed with 1% lidocaine, and after two weeks, Bupivacaine 0.25% was used in patients who tested positive for lidocaine. Patients with more than 75% pain reduction during movement after facet joint block were considered positive. Results: Among the 160 patients with chronic cervical pain, 96 patients(60%) had a positive reaction after facet block using lidocaine. Among the 64 patients with a negative reaction to lidocaine, 48 patients(75%) had a positive reaction to bupivacaine. There were 48 false positive patients(50%) who showed a positive reaction to lidocaine but a negative reaction to bupivacaine. The mean VAS of the total 160 patients before blocks was 8.5, after 2 weeks follow up it decreased to 2.7 (p = 0.001) and after 4weeks 3.6 (p = 0.001). The 8 patients as an initial improvement of symptoms are not satisfied with the procedure and the 3 patients had been worsened during observation, were showed pain relief after additional ultrasonography-guided facet joint block at 4th week. Conclusion: A single ultrasonography-guided block to chronic cervical pain patients has relatively low diagnostic value since high false positive rate. The twice facet joint blocks is thought to be a useful method for interventional pain management of patients with chronic cervical pain.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.3 no.2
• /
• pp.47-53
• /
• 2010

Purpose: We evaluated the efficacy of ultrasonographic examination of the medial collateral ligament injury in elbow joints in the high school male weight lifting athletes. Materials and Methods: The study group (group I) included 15 male weight lifting athletes (average age: 16.8) and the control group (group II) was demographically matched 9 male with no symptoms on their elbow. Both elbow joint was evaluated through physical examination, plain radiograph, valgus stress view and ultrasonography. Results: On plain radiograph, there was no significant differences (3.6 mm, 2.7 mm; p>0.05) for the medial articular distances between both groups. The valgus stress view revealed the significant increase in group I (right, avr. 5.86 mm and 3.52 mm, p<0.01, left, avr. 5.33 mm and 3.64 mm, p<0.01). On ultrasonography, medial joint space was increased in group I (right, avr. 4.66 mm and 3.29 mm, p<0.01, left elbow 4.28 mm and 3.38 mm, p<0.01). The lateral shifting of proximal ulna also increased in group I (right, avr. 0.73 mm and 1.43 mm, p<0.01, left, avr. 0.96 mm and 1.53 mm, p<0.05). The angular deformity were more prevalent in group I. Conclusion: The medial joint space widening and angular deformity was prevalent in male weight lifting athletes. the ultrasonographic examination was useful in evaluating the degree and incidence of the medial collateral ligament injuries.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.947-953
• /
• 2005

Previous test results showed that the current ASTM(American Standard for Testing and Materials) grip adapter for GFRP(Glass Fiber Reinforced Polymer) rebar was not fully successful in developing the design tensile strength of GFRP rebars with reasonable accuracy. It is because the current ASTM grip adapter which is composed of a pair of rectangular metal blocks of which inner faces are grooved along the longitudinal direction does not take into account the various geometric characteristics of GFRP rebar such as surface treatment, shape of bar cross section as well as physical characteristics such as poisson effect, elastic modulus in the transverse direction and so on. The objective of this paper is to provide how to proportion the optimum diameter of inner groove in ASTM grip adapter to develop design tensile strength of GFRP rebar. The proportioning of inner groove in ASTM grip adapter is based on the force equilibrium of GFRP rebar between tensile capacity and minimum frictional resistance required along the grip adapter. The frictional resistance of grip adapter is calculated based on the compressive strain compatibility in radial direction induced by the difference between diameter of GFRP rebar and inner groove In ASTM grip. All testing procedures were made according to the CSA S806-02 recommendations. From the preliminary test results on round-type GFRP rebars, it was found that maximum tensile loads acquired under the same testing conditions is highly affected by the diameter of inner groove in ASTM grip adapter. The grip adapter with specific dimension proportioned by proposed method recorded the highest tensile strength among them.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.17-27
• /
• 1981

This study was conducted to determine the chemical composition and the mechanical properties of four commercially available low gold-based crown and bridge alloy produced in Korea. Four dental casting gold-silver-palladium alloys, i.e., A, B, C and D (code of alloys) were selected for the evaluation of chemical composition, ultimate tensile strength, elongation. values and Vickers hardness. The chemical composition of test specimens was analyzed by both emission spectrography and wet gravitation method with a 1.5gm of low gold ingot. The tensile properties and Vickers hardness was determined with cast specimens treated in following three conditions; as-cast, softening heat treatment and hardening heat treatment. The tensile testing bars were cast in accordance with the model designed by Gettleman and Harrison (1969) which was modified from the A. D. A. Specification No. 14 for dental chromium-cobalt casting alloy. Nine tensile test specimens were made from a split silicone mold for each of the test alloys to the size of 2.5mm in diameter and a gauge length of 10mm. All four alloys were handled in accordance with conventional methods used in Type III gold alloys. Ultimate tensile strength and elongation were measured on an Instron Universal Tensile Testing Machine (Model 1125, Japan) operated at a crosshead rate of 0.1cm/min. Elongation values were measured using Digital Measuring Microscope (MS-152, FUSOH, Japan). Vickers hardness was determined with a Vickers Hardness Tester (Model VKH-l, Japan) at a 1.0kg load on a mounted tensile test specimen. The following results were obtained from this study; 1. All tested alloys were composed of Au, Ag, Pd, Cu, Zn and Fe in common. The composition rate of gold for all four alloys was found in the range of $42{\sim}47$ weight % as shown below. Alloy A; Au 45%, Ag 40.2%, Pd 5.76%, others 9.04%. Alloy B; Au 47.1%, Ag 29.03%, Pd 6.98%, others 16.92%. Alloy C; Au 45%, .Ag 26.9%, Pd 6.83%, others 21.07%. Alloy D; Au 41.8%, Ag 34.4%, Pd 6.95%, others 16.85%. 3. The ultimate tensile strength of the four alloys was in the range of $31{\sim}82kg/mm^2$. The test results were shown in the below order from the highest value; As-cast condition; D, B, C, A. Softening heat treament; B, C, D, A. Hardening heat treatment; D, B, C, A. 4. The test :results of the elongation rate for each alloy were in the range of $0.5{\sim}18%$. The test results were shown in the below order from the highest value; As-cast condition; A, D, B, C. Softening heat treatment; A, C, D, B. Hardening heat treatment; C, D, B, A. 5. Vickers hardness for each of the four alloys was in the range of $120{\sim}230$. The test results were shown in the below order from the highest value; As-cast condition; C, B, D, A Softening heat treatment; D, B, C, A. Hardening heat treatment; D, A, C, B. 6. There were no differences in the physical properties between as-cast condition and softening heat treatment.

• Culinary science and hospitality research
• /
• v.21 no.4
• /
• pp.16-28
• /
• 2015

The purpose of this study, as a part of developing a new french dressing, was to present the best conditions to make improved kiwi dressing, suitable for the tastes of modern people, the processing and cooking methods of different ratios of green kiwi and gold kiwi have been sought to develop a new type of dressing, then its antioxidant have been defined, and used for producing kiwi dressing. Each 150g of different Kiwi purees, made based on the most preferable combinations from the pre-test were used for kiwi dressing, and thereafter its quality characteristics, and physical properties were investigated, as well as a sensory test was conducted. The highest viscosity of kiwi dressing was test sample GD2, and in general that of combining both types of kiwis were higher than that of either single kiwi. The sugar content was decreased by changing the Gold kiwi portion(p<0.05). The chromaticity in general increased with increases in the Gold kiwi portion, and a-value(brightness) and b-value(redness) of sample GD1 were the highest by -2.75 and 17.50(p<0.05). From the acceptability test, the highest overall acceptability was the dressing sample combining Gold kiwi and Green kiwi at a ratio of 1:1. Based on the study results, it is expected that the dressing, made of kiwi puree, mixing Green kiwi and Gold kiwi by 1:1 ratio, and adding 130g of edible oil, 50g of onion, 40g of sugar, and 5g of salt, would improve the quality and overall acceptability of the dressing.

• The Journal of Korean Academy of Sensory Integration
• /
• v.15 no.2
• /
• pp.46-65
• /
• 2017

Objective : The purpose of this research is to find clinical effects of application of weighted vest during task-oriented training focused on gross motor performance and balance abilities of children with spastic diplegia. Methods : 34 subjects were divided by simple random sampling into two groups; experimental group (male : 9, female : 8, average age : 8.12) and placebo group (male : 9, female : 9, average age : 7.53). Both two groups underwent to 40 minute intervention, twice a week for 12 weeks. The intervention was task-oriented training focused on facilitating closed kinematic chain and multi-joint functional movement pattern. During the training, the experimental group received loaded-resistance weighted vest and placebo group also received weighted vest but without loaded-resistance. Participants in both groups underwent 8 to 10 reps of the task-oriented training and there were 3 minutes break time between tasks. There were pre-test of gross motor performance and balance abilities, and two times of post-tests were performed upon 6 weeks and 12 weeks after the intervention completed. And in final, an additional follow-up test was performed 12 weeks after the evaluation was finished in order to find any difference between the two groups over time. Results : There was significant difference in Gross Motor Performance Measure (GMPM) between two groups. It is found that average score of the experimental group increased more than the placebo group after 6 weeks and 12 weeks intervention (p<.05). There was significant difference in Pediatric Berg's Balance Scale (PBS) between two groups. It is found that average score of the experimental group increased more than the placebo group after 6 weeks and 12 weeks intervention (p<.05). Conclusion : Based on the results in this study, it is proposed that application of weighted vest into task-oriented training to facilitating closed kinematic chain and multi-joint movement can improve gross motor performance and balance abilities of children with cerebral palsy.

• Sleep Medicine and Psychophysiology
• /
• v.6 no.1
• /
• pp.76-84
• /
• 1999

Objectives: A number of studies have shown that sleep deprivation results in reduced vigilance and increased negative affects such as tension, depression and anger. However there are few studies about effects of sleep deprivation on anxiety. The purpose of this study was to investigate the effects of 40 hour sleep deprivation on state anxiety, affects, sleepiness and fatigue. The authors also intended to study the effect of trait-anxiety on these psychological variables after sleep deprivation. Methods: Twenty nine subjects(22 men, 7 women, $24.59{\pm}1.35$ years of age) participated in this study. Subjects had no past history of psychiatric disorders and physical illnesses, and had normal sleep-waking cycle without current sleep disturbances. All of the subjects completed sleep dairy for two weeks to exclude some who suffered from chronic sleep deprivation or sleep disturbances. Subjects were instructed to get a normal sleep as usual at night before the study. After awakening, subjects remained awake for 40 hours under continuous surveillance. They completed State-Trait Anxiety Inventory, Index of General Affect, Stanford Sleepiness Scale and Fatigue Questionnaire every three hours, therefore they completed the scales 14 times totally. Subjects were dictated not to take caffeine, alcohol, or any medications on the day of the study. Heavy exercises and naps were restricted too. Results: Sleep deprivation resulted in increased state anxiety, negative general affects, and increased sleepiness and fatigue(p<.001). Dividing into high trait-anxiety group and low trait-anxiety group, there was significant sleep deprivation x traitanxiety interaction effect on general affect(p<.05). But, there was no significant sleep deprivation x trait-anxiety interaction effect on state-anxiety, sleepiness and fatigue. During sleep deprivation, the highest ratings of scales on anxiety, negative affect, sleepiness and fatigue occurred between 4 : 00AM and 7 : 00AM. Conclusions: These results show that sleep deprivation results in increased anxiety, mood state disturbance and increment of sleepiness and fatigue. These findings also suggest that trait-anxiety is a factor that influences the degree of worsening in general affect caused by sleep deprivation. During sleep deprivation, the rating curves of anxiety, affect, sleepiness and fatigue show rhythmicity that may be related to circadian rhythm.