• 한국염색가공학회지
• /
• 제27권3호
• /
• pp.210-218
• /
• 2015

In this study, natural substance and mineral materials was used for architectural interior wallpaper. Because natural substance and minerals are environment-friendly material with moisture adsorption and desorption properties. Natural substance and mineral materials was evaluated in moisture adsorption and desorption properties. Also, in the diatomite, the pores were observed on SEM photographs. Thus, it is supposed that moisture adsorption and desorption properties were influenced by the microstructure of the pore. The wallpaper according to the ratio of the mixture was analyzed for physical properties and moisture adsorption & desorption properties. As a result, we developed a wallpaper having excellent hygrothermal performance.

• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.488-502
• /
• 2020

In this study, the moisture absorption and desorption properties presented by the Health-Friendly Housing Construction Standards of South Korea were compared using the wood of three tree species (Douglas-fir, Hinoki, Larch) and two types of wood-based materials(Plywood, WML Board^Ⓡ). The national standards for functional building materials present that the amounts of moisture absorption and desorption should be at least 65g/㎡ on average, respectively according to the test method under KS F 2611:2009. Therefore, in this study, the moisture absorption/desorption properties of materials with no treatment (Control), with punching, and with surface stain finishing and the moisture absorption/desorption property improvement effects of the treatments were compared and analyzed. According to the results of this study, it was evaluated that all five types of wood and wood-based materials tested did not satisfy the amount of moisture absorption/desorption of at least 65g/㎡, which is the performance standard for moisture absorption/desorption functional building materials, indicating that untreated wood and wood-based materials cannot be applied as functional finishing materials according to the Health-Friendly Housing Construction Standards. The surface stain finishing greatly reduced the moisture absorption and desorption rates of the materials, and the amounts of moisture absorbed and desorbed were also shown to decrease by at least two times on average. When the surfaces of the materials were punched with Ø4mm holes at intervals of 20 mm, the moisture absorption/desorption areas increased from 18% to 51%, and this increase was shown to be capable of increasing the amounts of moisture absorbed/desorbed by 29% on average at the minimum, and 81% on average at the maximum. The effects of punching were shown to be identical even in cases where the materials were stain finished. For the application of wood or wood-based materials as eco-friendly, health-friendly, and moisture absorption/desorption functional building materials hereafter, it is judged that new physical and chemical improvement studies should be conducted, and treatment methods should be developed.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.111-114
• /
• 2001

Thermal desorption process is valuable for the remediation of oil contaminated site. The system is physical separation process by volatizing oil contaminants from soil matrixes and is not designed to provide high levels of oil destruction. The process is not incineration, because the decomposition of oil materials is not the desired result, although some decomposition may occur. The physical and chemical properties that influence the design and operation of the system include boiling points, soil sorption characteristics, aqueous phase solubility, thermal stability, contaminating oil concentration, moisture contents, particle size distribution and etc.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.145.1-145
• /
• 1998

• Bulletin of the Korean Chemical Society
• /
• 제32권4호
• /
• pp.1253-1257
• /
• 2011

The surface structures, adsorption conditions, and thermal desorption behaviors of cyclopentanethiol (CPT) self-assembled monolayers (SAMs) on Au(111) were investigated by scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and thermal desorption spectroscopy (TDS). STM imaging revealed that although the adsorption of CPT on Au(111) at room temperature generates disordered SAMs, CPT molecules at $50^{\circ}C$ formed well-ordered SAMs with a $(2{\surd}3{\times}{\surd}5)R41^{\circ}$ packing structure. XPS measurements showed that CPT SAMs at room temperature were formed via chemical reactions between the sulfur atoms and gold surfaces. TDS measurements showed two dominant TD peaks for the decomposed fragments ($C_5H_9^+$, m/e = 69) generated via C-S bond cleavage and the parent molecular species ($C_5H_9SH^+$, m/e = 102) derived from a recombination of the chemisorbed thiolates and hydrogen atoms near 440 K. Interestingly, dimerization of sulfur atoms in n-alkanethiol SAMs usually occurs during thermal desorption and the same reaction did not happen for CPT SAMs, which may be due to the steric hindrance of cyclic rings of the CPT molecules. In this study, we demonstrated that the alicyclic ring of organic thiols strongly affected the surface structure and thermal desorption behavior of SAMs, thus providing a good method for controlling chemical and physical properties of organic thiol SAMs.

• 대한환경공학회지
• /
• 제22권6호
• /
• pp.1045-1053
• /
• 2000

제초제로 사용되는 napropamide와 pendimethalin의 토양내 흡착 탈착특성을 파악하기 위하여 진탕시간, 유기물함량, pH, 온도 등을 변화시키면서 실험을 수행하였다. Sandy loam, silty clay, loam 토양에 대하여 napropamide 및 pendimethalin이 흡착 탈착 평형에 도달되기 위한 진탕시간은 각각 12시간 및 6시간으로 나타났다. 평형흡착 탈착에 도달되었을 때 각 토양에 대한 napropamide의 흡착율 및 탈착율은 각각 23.35%, 31.57%, 25.95% 및 18.42%, 13.42%, 15.89%, pendimethalin은 각각 59.61%, 77.26%, 64.02% 및 3.23%, 2.93%, 3.07%이었다. 등온흡착은 Langmuir식보다는 Freundlich식에 적합하였다. 유기물함량이 2.0% 이상에서의 흡착은 유기물의 영향을 받고, 그 이하에서는 점토의 영향을 받고 있음을 알 수 있었다. 유기물함량 0.95~7.45(%)의 범위에서 흡착계수($K_{fa}$) 및 탈착 계수($K_{fd}$)는 napropamide의 경우 1.17~2.50 및 5.33~34.06, pendimethalin은 4.74~16.08 및 24.25~134.00로 나타났다. 따라서 유기물은 농약과 흡착친화력이 높기 때문에 유기물함량이 증가하면 흡착율은 증가하고, 탈착율은 감소하는 경향을 나타내었다. Napropamide와 pendimethalin은 비이온성 농약이기 때문에 pH 변화로 인한 흡착 탈착경향은 거의 변화가 없는 것으로 나타났다. 토양의 온도 변화에 따른 제초제의 흡착율은 온도가 낮을수록 증가하는 경향을 나타냈으며, 탈착율은 온도가 높을수록 증가하는 경향을 나타냈다. 이것은 실험에 사용된 제초제가 낮은 온도에서는 용해도가 낮지만, 높은 온도에서 용해도가 높기 때문이다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제13권5호
• /
• pp.81-87
• /
• 2008

최근 주한미군기지 이전에 따른 토양오염도 조사결과, 유류저장시설에서의 누출 및 사격장내 중금속에 의한 오염이 심각한 것으로 보고되었으며 오염토양 정화에 대한 관심이 증대되고 있다. 다단연속탈착기법과 교반탈착기법을 적용한 현장규모의 유류오염토양 세척공정 성능향상에 관한 연구를 위해서 각각 다른 세지역의 정화대상부지 오염토양 중 미세토사가 29.3, 16.6, 7.8% 함유된 토양을 사용하였으며, 초기 오염농도는 각각 5,183, 2,560, 4,860 mg/kg이였다. 세척실험에 사용한 세척제로는 물을 이용하였으며 세척수를 6개월 이상 100% 재활용하여 세척공정을 운영하였다. 현장규모 세척 실험 결과 각기 다른지역의 오염토양 중 3.0 mm 이상의 오염토양은 세척수 분사압력 3.0 kg/$cm^2$의 고압분사를 통한 습식분리 후 TPH 농도는 280, 50, 356 mg/kg으로 초기농도 대비 각각 85.2, 98.2, 89.9%의 TPH 제거율을 보였다. 3.0${\sim}$0.075 mm의 모래입경에 대하여 1차 물리적 탈착 후 TPH 농도 [초기 입경별 오염부하량 대비]는 834, 1,110, 1,460 mg/kg 이었으며, 추가적인 세척공정의 2차 연속 물리적 탈착인 다단연속탈착기법을 통한 TPH 농도는 각각 330, 385, 245 mg/kg으로 초기농도 대비 각각 92.4, 90.6, 90.1%의 세척효율을 보였다. 미세모래 입경(0.075${\sim}$0.053 mm)에 대한 다단연속세척 후 TPH 농도는 791, 885, 1,560 mg/kg으로 나타났으며, 추가적인 교반 탈착 후 TPH 농도는 각각 428, 440, 358 mg/kg으로 초기농도 대비 92.0, 93.9, 92.9%의 제거율을 보였다. 이와 같은 결과를 바탕으로, 토양세척기법은 TPH 법적기준을 맞출 수 있는 전략적 복합공정을 통해 다양한 오염토양에 폭넓게 적용할 수 있을 것으로 판단된다.

• 한국환경과학회지
• /
• 제8권2호
• /
• pp.249-254
• /
• 1999

The biosorption and desorption of Cd were carried out using brown marine algae, known as the good biosorbent of heavy metals. The content of alginate bound to light metals could be changed by the physical and the chemical pretreatment of Sargassum fluitans biomass. The Cd uptake was independent of the alginate content. In case of protonated biomass, Cd uptake was the lowest because the alginic acid of biomass was dissolved to cadmium solution during the biosorption. The maximum Cd uptake of Sargassum biomass was ranged from 79 mg/g to 139 mg/g. In case of raw biomass, the higher the alginate content of biomass, the higher was the Cd uptake. 100% of Cd and light metals sorbed in the biomass were eluted at 0.1N HCI(pH 1.1). However, the elution efficiency in $CaCl_2$ and $Ca{(NO_3)}_2$solution was varied by the concentration, the solid to liquid ratio and the pH of calcium solution. The distribution coefficient between Cd and protons in the desorption solution at pH ranged from 1.6 to 2.9 was observed on the constant stoichometric coefficient(1.3).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.198-198
• /
• 2013

Metal-Oxide-Semiconductor (MOS)에서 사용되는 다양한 channel materials로 high electron mobility을 가지는 III-V compound semiconductor가 대두되고 있다 [1,2]. 하지만 이러한 III-V compound semiconductor는 Si에 비해 안정적인 native oxide가 부족하기 때문에 Si, Ge, Al2O3과 BeO 등과 같은 다양한 물질들의 interface passivation layers (IPLs)에 대한 연구가 많이 되고 있다. 이러한 IPLs 물질은 0.5~1.0 nm의 매우 얇은 physical thickness를 가지고 있고 또한 chemical inert하기 때문에 플라즈마 식각에 대한 연구가 되고 있지만 IPLs 식각 후 기판인 III-V compound semiconductor에 physical damage과 substrate recess를 줄이기 위해서 높은 선택비가 필요하다. 이러한 식각의 대안으로 원자층 식각이 연구되고 있으며 이러한 원자층 식각은 반응성 있는 BCl3의 adsorption과 low energy의 Ar bombardment로 desorption으로 self-limited한 one monolayer 식각을 가능하게 한다. 그러므로 본 연구에서는, III-V compound semiconductor 위에 IPLs의 adsorption과 desorption의 cyclic process를 이용한 원자층식각으로 다양한 물질인 SiO2, Al2O3 (self-limited one monolayer etch rate=about 1 ${\AA}$/cycle), BeO (self-limited one monolayer etch rate=about 0.75 ${\AA}$/cycle)를 얻었으며 그 결과 precise한 etch depth control로 minimal substrate recess 식각을 할 수 있었다.

• 한국대기환경학회지
• /
• 제23권5호
• /
• pp.575-584
• /
• 2007

The adsorption capability of iron phthalocyanine derivatives were investigated by means of X-ray diffractometor (XRD), IR (infrared) spectroscopy, scanning electron microscopy (SEM) and temperature programmed desorption (TPD). According to TPD results, iron phthalocyanine derivatives showed two desorption peaks at low temperature ($100{\sim}150^{\circ}C$) and high temperature ($350{\sim}400^{\circ}C$) indicating that there were two kinds of acidities. Tetracarboxylic iron phthalocyanine (Fe-TCPC) have a stronger desorption peak (chemical adsorption) at the high temperature and a weaker desorption peak (physical adsorption) at the low temperature than iron phthalocyanine (Fe-PC). The specific surface areas of Fe-TCPC and Fe-PC were $26.46\;m^2/g\;and\;11.77\;m^2/g$, respectively. The pore volumes of Fe-TCPC and Fe-PC were $0.14\;cm^3/g\;and\;0.06\;cm^3/g$, respectively. The adsorption capability of triethyl amine calculated by breakthrough curve at 220 ppm of equilibrium concentration was 29.2 mmoL/g for Fe-TCPC and 0.8 mmoL/g for Fe-PC. The removal efficiency of dimethyl sulfide of Fe-TCPC and Fe-PC in batch experiment of 225 ppm of initial concentration were 44.9% and 28.9%, respectively. The removal efficiency of trimethyl amine of Fe-TCPC and Fe-PC in batch experiment of 118 ppm of initial concentration were approximately 100.0% and 33.9%, respectively.