• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.366-366
• /
• 2008

Amorphous carbon (a-C) is an interesting materials and its characteristics can be varied by tuning it $sp^3$ fractions. The $sp^3$ fraction in a-C films depends on the kinetic energy of the deposited carbon ions. In this work, a-C films was synthesized on Si(100) and glass substrates at room temperature by closed-field unbalanced magnetron (CFUBM) sputtering with the increase of graphite target power density. The structural and physical properties of films were investigated by using Raman spectroscopy, X-ray photoelectron spectrometer (XPS), nano- indentation, atomic force microscope (AFM) and contact-angle measurement. We obtained the good tribological properties, such as high hardness up to 26 GPa., friction coefficient lower than 0.1 and the smooth surface (rms roughness: 0.12 nm). The increase of the physical properties with the increase of target power density are related to the increase of nano-clusters in the carbon network. Also, these results might be due to the increase of the subplantation and resputtering by the increase of ions density in the plasma.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.2
• /
• pp.289-300
• /
• 2010

Purpose : This study was to explore the effects of knee joint taping exercise on muscle strength, bone mineral density, pain and IGF-1 in blood of elderly women with knee Osteoarthritis. Methods : Thirty elderly women with knee osteoarthritis were divided into three groups: the taping with exercise group (n=10), the regular exercise group (n=10) and control group (n=10). Participants' muscle strength, bone mineral density, pain and IGF-1 in blood were measured three times : before exercise, after 6 weeks, and after 12 weeks. Results : Participants in both exercise (taping & non-taping) groups showed improvement in muscle strength, bone mineral density, pain and IGF-1 in blood after 6 and 12 weeks compared to before exercise. In particular, the taping exercise group had a greater effect on muscle strength than the regular exercise group. Conclusion : Both exercise programs considerably improved muscle strength, bone mineral density, reduced pain and IGF-1 in blood in elderly women with knee Osteoarthritis. The knee joint taping exercise is perhaps a better exercise to improve muscle strength than the regular exercise in treating elderly women with knee Osteoarthritis

• Journal of the East Asian Society of Dietary Life
• /
• v.4 no.3
• /
• pp.21-30
• /
• 1994

The relationship between bone mineral density and the environmental factors were investigated from the view point of preventing osteoporosis in Korean pubescent girls. The effects of calcium, nutrient intake, physical activity on total bone mineral density, lumbar spine and femoral bone mineral density and total bone mineral content were evaluated 33 healthy pubescent girls aged 14∼16y. A convenient method was used to assess nutritional and energy intake and calcium index was used together. Calcium intake in childhood was estimated by asking whether subjects usually drank milk as children. Eating habits data and history of menstruation were obtained by questionnaire and interview. Average energy expenditure was calculated. Bone mineral density and content were measured by dual energy x-ray absorptiometry using a Lunar DPX＋Scanner (Lunar, Madison, WI). The lumbar spine(L2∼L4) and three sites in the proximal femur (femoral neck, trochanteric region, and Ward's triangle)were measured. Height and weight were measured, and the body mass index(BMI) was derived from the formula : BMI=kg/㎡ Statistical analysis was performed by simple correlation using the SAS package. The mean calcium intake (736mg) was below the RDA of 800mg/d. Twelve percent of the total subjects did not drink milk at all because they did not like the taste. Skipping meals, low calcium intake and low energy intake were significantly correlated with the low BMD. Also the data indicate that girls who reported drinking milk with every meal during childhood had significantly higher bone densities than girls who reported drinking milk less frequently. The results suggest that milk consumption in childhood appears to be needed not only for growth and development, but possibly also to assure an optimal peak of bone mass and thus greater latitude for the maintenance or skeletal integrity in the face of bone losses. There was a highly significant correlation between the total BMD and overall level of physical activity. Body weight was a better predictor of total BMD than was and other factor. Simple mechanical loading may explain why body weight, but total BMC was positively relatd to height. Conclusively, increasing calcium intake and physical activity in the pubescent girls could influence BMD.

• Journal of the Korean Society of Radiology
• /
• v.11 no.6
• /
• pp.501-508
• /
• 2017

The dependence of CT scanning parameters on the CT number to physical density conversion from the CT image of CT and CBCT electron density phantom acquired by the CT scanner using in radiotherapy were analyzed by experiment. The CT numbers were independent of the tube current product exposure time, slice thickness, filter of image reconstruction, field of view and volume of phantom. But the CT numbers were dependent on the tube voltage and cross section of phantom. As a result, for physical density range above 0, the maximum CT number difference observed at the tube voltage between 90 and 120 kVp was 27%, and the maximum CT number difference observed between CT body and head electron density phantom was 15%.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.91-99
• /
• 2017

In order to meet the thermal performance analysis accuracy requirements of high density permanent magnet synchronous motor (PMSM), a method of multi physical domain coupling thermal analysis based on control circuit, electromagnetic and thermal is presented. The circuit, electromagnetic, fluid, temperature and other physical domain are integrated and the temperature rise calculation method that considers the harmonic loss on the frequency conversion control as well as the loss non-uniformly distributed and directly mapped to the temperature field is closer to the actual situation. The key is to obtain the motor parameters, the realization of the vector control circuit and the accurate calculation and mapping of the loss. Taking a 48 slots 8 poles high density PMSM as an example, the temperature rise distribution of the key components is simulated, and the experimental platform is built. The temperature of the key components of the prototype machine is tested, which is in agreement with the simulation results. The validity and accuracy of the multi physical domain coupling thermal analysis method are verified.

• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.1
• /
• pp.51-58
• /
• 2021

The purpose of this study is to use urban regeneration management types through classification and step-setting of physical types by administrative dong as the basis data for future urban management plans in local small and medium cities. The analysis was conducted on the physical density of each administrative dong by setting the data on urban and architecture provided by the government as three elements: buildings, lots, roads, etc. Through the system classified in this study, Mokpo City's 23 administrative districts were divided into nine management types and three management steps. Methodology can be utilized to establish areas of similar areas within the city and to use them as basic data for planning management. It is meaningful that it is possible to extract areas that need actual regeneration and maintenance through physical density analysis and plan suitable projects.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.185-186
• /
• 2023

In the production of high-strength concrete of 80 MPa or more, silica fume is widely used as a binder to ensure the strength safety and pumpability of concrete. The bulk density of silica fume is an important physical property that can have a significant impact on the performance of concrete. Therefore, Understanding the effect of silica fume density on the physical properties of concrete and selecting the appropriate material with the correct density is crucial to ensuring optimal performance in construction projects.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.663-676
• /
• 1996

Physical properties and textural parameters of thirty-five piston tore samples recovered from the southeastern coast of Korea (Korea Strait), were investigated using the autopycnometer. The physical properties (porosity, water content, wet bulk density, dry bulk density, gram density, and void ratio) were measured at rather uniform intervals along each core. Sediment texture (grain size, sand, silt, and clay contents) was also measured at the same subbottom depth. The measured and calculated results are; mean grain size $0.57\~8.09\phi(average:3.67\phi)$, porosity $26\~81\%\;(average:\;55\%)$, water content $16.7\~61.4\%(average:\;31.6\%)$, wet bulk density $1.37\~2.18g/cm^3\;(average:\;1.85g/cm^3)$, dry bulk density $2.55\~3.11g/cm^3\;(average:\;2.35g/cm^3)$, grain density $2.40\~3.10g/cm^3\;(average:\;2.85g/cm^3)$, and void ratio $0.56\~2.54$ (average: 0.94). The sediment texture generally coincides well with the bathymetry indicating the influence of Pleistocene-Holocene sea level changes. Also the contours of physical properties are closely related to the sediment texture. Fluctuation of physical properties are similar to the textural variation. It seems that sediment texture is a significant factor in determining physical property in this study area.

• Journal of Preventive Medicine and Public Health
• /
• v.46 no.2
• /
• pp.89-95
• /
• 2013

Objectives: Little is yet known about the determinants of bone mineral density (BMD) in young adults. Thus, in this study, we aimed to determine the factors that have an impact on BMD in young men. Methods: Questionnaires were sent out to 111 male medical students. Information on age, socio-economic status, medical history, lifestyle, physical activity during adolescence, school club participation, current physical activity, and dietary intake were collected by the survey. Height, weight, percent body fat and muscle mass were estimated by bioelectrical impedance, and BMD was obtained using calcaneal quantitative ultrasound. Using the Poisson regression model, prevalence ratios (PRs) were used to estimate the degree of association between risk factors and osteopenia. Results: The height and current physical activity showed a correlation to the Osteoporosis Index. Among the categorized variables, past physical activity during adolescence (p= 0.002) showed a positive effect on the bone mineral content. In the multivariate model, past physical activity (${\geq}1$ time/wk) had a protective effect on osteopenia (PR, 0.37; 95% confidence interval [CI], 0.18 to 0.75) and present physical activity (1000 metabolic equivalent of task-min/wk) decreased the risk of osteopenia (PR, 0.64; 95% CI, 0.44 to 0.91). Conclusions: Past physical activity during adolescence is as important as physical activity in the present for BMD in young men.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.505-508
• /
• 2015

Soil bulk density is a key parameter for soil physical property. Much root placed in rhizosphere soil lump, especially in grassland and orchard, makes it difficult to measure soil bulk density. This experiment was carried out to countermeasure the above drawbacks. Volume check apparatus using water-filling method was made of acryl for higher accuracy in bulk density measurement. 10 types of land cover, including bare, tall fescue, rye, and soybean, were used for determining the relationships between root and bulk density. In this study, higher root volume resulted in higher differences in bulk density between in-situ core soil and root-ridded core soil, which indicated the volume check apparatus through water-filling could be useful for increasing the accuracy of bulk density of soils with much root.