• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.934-938
• /
• 1999

Effect of processing agents on physical properties on aniline-type leathers such as wet blue, crust leather, and finished leather has been investigated. These leathers were manufactured from pelts obtained by the chemical, the enzyme, and the bio-tech treatment. There was no difference in physical properties between crust leather and finished leather. All finished leathers with the three treatments were satisfied with the Korean Industrial Standard like a tensile strength of $1.2kg_f/mm^2$, an elongation of 30%, a tear strength of $3.0kg_f/mm$, a grain crack weight of $15kg_f$, and a $Cr_2O_3$ content of 2.5%. In peculiar, application of the bio-tech treatment gave the best leather. This improvement of physical quality could be explained by the results of SEM and image analyser.

• Journal of Korea Soil Environment Society
• /
• v.4 no.1
• /
• pp.119-126
• /
• 1999

This study was carried out to estimate the effect of forest fire on physical and chemical properties of soil The forest fire was in April 1995 at Kongju of Chungnam. Soil samples were collected at 0~5cm, 5~10cm, and 10~20cm soil depths in September 1998 from the burned and unburned sites. Soil organic matter concentrations at 0~5cm and 5~10cm soil depths were significantly greater in unburned site than in burned site. Soil concentrations were greater in unburned site than in burned site at all soil depths. Cation exchange capacity was significantly higher in unburned site than in burned site at 0~5cm soil depth. There were no differences in available soil P, exchangeable soil K, Ca, and Mg, and pH of soil between burned and unburned sites. Soil water content at 0~5cm soil depth was significantly greater in unburned site than in burned site. Bulk density at 0~5cm soil depth was significantly higher in burned site than in unburned site. Forest fire had an adverse effect on physical and chemical properties of soil in this study, Burning of vegetation and forest 리oor organic matter in burned site may reduce organic matter supply to soil and increase soil erosion. Consequently, forest fire may have adverse influence on long-term site productivity.

• Journal of Environmental Impact Assessment
• /
• v.31 no.6
• /
• pp.423-437
• /
• 2022

Parts of damaged trees are being transplanted in accordance with the Environmental Impact Assessment Manual. Problems such as death or poor growth are constantly being addressed in the process of transplanting trees from the forest they originally inhabited to temporary and final transplant sites. The purpose of this study is to analyze the differences in soil properties in the surrounding forest, the temporary transplant site, and the construction site and to suggest methods for improving the soil to make it suitable for the growth of transplanted trees. For 10 development projects, 2 soil samples were sampled from the surrounding forest, temporary transplant site, and construction site. A total of 60 soil samples were analyzed for physical and chemical properties. Among the physical properties such as coefficient of permeability, available moisture, and hardness, and chemical properties such as acidity, organic matter content, total nitrogen, and available P showed significant differences among groups. The soil of the construction site is harder than the surrounding forest because of construction equipments, the coefficient of permeability is higherthan the surrounding forest because of high sand content, and the available moisture was low. It does not retain the moisture necessary for plants in the soil and drains immediately. It is necessary to implement tillage to improve the physical properties and structure of the soil. In addition, it is necessary to cover the surface with wood chips or fallen leaves after adding mature organic matter to improve the physical and chemical properties of the soil together.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.155-160
• /
• 2000

In this paper, we investigated quality properties for the expansive of the CaO-$CaSO_4$ family which used to compensate dry-shrinkage in the floor mortar of On-Dol heating System. This experimental study established the mix condition with quantity of the expansive and is to investigate the relativity between the compress strength and the length change and the relativity between the chemical properties and the length change with the analysis of the physical and chemical properties. As a result of the study, the expansive is controlled by more the CaO than the $CaSO_4$. The relativity between the compress strength and the length change is expressed by exponential function, showing that if the expansive performance is increased, the compress strength is decreased. And the relativity between the chemical properties and the length change is only relative the quantity of the F-CaO among the chemical properties, is expressed by the second order function, showing that if the F-CaO is increased, the expansive performance is increased.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.49-54
• /
• 2001

This study was carried out to acquire basic data for the bleaching of bamboo chemical pulp. Bamboo chemical pulps (alkaline sulfite (AS)-anthraquinone (AQ) pulp, Kraft pulp) were bleached with two kinds of multistage bleaching methods (CEDED, PDED) using the various kinds of bleaching agents. And, physical properties of bleached pulps were investigated. The conclusions obtained from the results were as follows; The yield of AS-AQ pulp bleached with four-stages bleaching method using the hydrogen peroxide and chlorine dioxide as a bleaching agents was higher than the other bleached pulps. The brightness of kraft pulp bleached with five-stages bleaching method using the chlorine and chlorine dioxide as a bleaching agents was higher than the other bleached pulps. The physical properties of kraft pulp bleached with four-stages bleaching method using the hydrogen peroxide and chlorine dioxide as a bleaching agents was higher than the other bleached pulps.

• Journal of Veterinary Clinics
• /
• v.22 no.2
• /
• pp.100-107
• /
• 2005

This study was carried out to investigate the physical and chemical properties of teat cup liners. The hardness of the liners was $50\~67$, and their fatigue to failure 38-1,185 cycles. The elongation and tensile strength of these liners were about $134 kgf/cm^2\;and\;473\%$, respectively. The infrared spectrum and the gas chromatogram revealed that the liner A was consisted of NR, SBR, and BR, with a composition ratio of 60:20:20 (part per hundred rubber). The raw rubber materials used for liners B to G, on the other hand, were NBR only. However, the liner H was made of silicon rubber. The thermogravimetric analysis showed that the liners tested in this study contained raw rubber material, carbon black, organic compounds and metallic compounds.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.9
• /
• pp.832-837
• /
• 2006

Antennas were fabricated by physical(adhesive) and chemical(deposition+plating) method on organic-inorganic composite material. And antennas were measured dielectric constant and gain. Dielectric constant of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness and number of conduction material composition. But antennas were fabricated by chemical method was reached to 90 % of dielectric material. Gain of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness. But they were unrelated with conduction material composition. The other side antennas were fabricated by chemical method excelled more 0.8 dBic than antennas were fabricated by physical method in gain of antenna. Finally, chemical method can expect excellent product process because it can produce smaller size, higher gain and elimination of many handworks.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.3
• /
• pp.203-211
• /
• 2000

Pyrophosphoric lactone modified polyester(PATT) that contains two phosphorous functional groups in one unit base resin structure was synthesized to prepare a non-toxic reactive flame retardant coatings. Then the PATT was cured at room temperature with isocyanate, Desmodur IL, to get a two-component polyurethane flame retardant coatings(PIPUC). Comparing the physical properties of the films of PIPUC with the film of non-flame retardant coatings, there was no degradation observed in physical properties by the introduction of a flame-retarding component into the resin. We found that the char lengths measured by $45^{\circ}$Meckel burner method were $3.1{\sim}4.4cm$ and LOI values recorded $27{\sim}30%$. These results indicate that the coatings prepared in this study is good flame retardant one. The surface structure of coatings investigated with SEM does not show any defects and phase separation.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.270-278
• /
• 2007

PEMFC electrodes with various gas diffusion layers (GDL) were characterized to find out the effect of GDL on fuel cell performance. The physical properties of GDL such as electric conductivity, porosity, air permeability, water flux, PTFE content, etc had close relationship each other and affected on the variation of the cell performance. It was observed that the micro-porous layer (MPL) on carbon paper or cloth changed the physical properties of GDL and changed the cell performance. The variation of cell performance as a function of the physical properties of GDL showed different behaviors according to the amount of current density.

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.579-585
• /
• 2017

Acrylic resins containing tertiary amine were synthesized by a radical polymerization of monomers including n-butyl acrylate (BA), methyl methacrylate (MMA), n-butyl methacrylate (BMA) and dimethylaminoethyl methacrylate (DMAEMA), and diethylaminoethyl methacrylate (DEAEMA) containing tertiary amine. Synthesized acrylic resins were applied to develope coatings of acrylic resins containing tertiary amine. And ${\gamma}$-glycidoxypropyl trimethoxysilane (GPTMS) or ${\gamma}$-glycidoxypropyl triethoxysilane (GPTES) was used as hardener. Developed coatings were white colored ones to use titanium dioxide and were hardened with hardener for measuring their physical properties. Measured physical properties were basic properties, adhesivity and weatherability. As a result, developed acrylic resins coatings containing tertiary amine showed excellent adhesivity on various substrates and also showed the same result on weatherability on dry weather condition.