• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1161-1161
• /
• 2001

Rapid cost-effective methods of measuring wood quality are extremely important to tree improvement programs where it is necessary to test large numbers of trees. Non-destructive sampling of a forest can be achieved by using increment cores generally removed at breast height. At CSIRO Forestry and Forest Products methods for the rapid, non-destructive measurement of wood properties and wood chemistry based on increment core samples have been developed. In this paper the application of near infrared (NIR) spectroscopy to the prediction of a range solid wood properties, including density, longitudinal modulus of elasticity (E$\sub$L/) and microfibril angle (MFA), is described. Experiments conducted on individual species (Eucalyptus delegatensis and Pinus radiata), the two species combined and a number of mixed species from several genera are reported. NIR spectra were obtained from the radial/longitudinal face of each sample and used to develop calibrations for the measured physical properties. When the individual species were used the relationships between laboratory determined data and NIR fitted data were good in all cases. Coefficients of determination (R$^2$) ranging from 0.77 for MFA to 0.93 for stick density were obtained for E. delegatensis and R$^2$ ranging from 0.68 for MFA to 0.94 for strip density were obtained for P. radiata. The calibration statistics for the combined E. delegatensis and P. radiata samples were similar to those found for the individual species. As these results indicated that it might be possible to produce general calibrations based on samples from a number of species of a single genus or samples from a number of different genera, a wide range of species was subsequently tested. Good relationships were obtained for both density and E$\sub$L/. These calibrations had R$^2$ that were slightly lower than those determined using individual species and standard errors that were higher. The mixed species calibrations, when applied to the E. delegatensis and P. radiata sample sets, provided good estimates of density (stick and strip) and E$\sub$L/. The results demonstrated that a mixed species calibration, that encompasses wide variation in terms of, wood anatomy, chemistry and physical properties, could be used to rank trees. Experiments reported in this paper demonstrate that solid wood properties can be estimated by NIR spectroscopy. The method offers a rapid and non-destructive alternative to traditional methods of analysis and is applicable to large-scale non-destructive forest resource assessment, and to tree breeding and silvicultural programs.

• Journal of Internet Computing and Services
• /
• v.19 no.6
• /
• pp.9-20
• /
• 2018

Financial service industry has introduced and operated management systems such as information security management system (ISMS), personal information security management system, business continuity management system to protect and maintain suitably customer's financial information and financial service. This study started that it's desirable financial industry takes consideration of ISMS and it can be different types among various organizations taking consideration of culture, practical work, and guideline of information security. The study derives primary control areas of ISMS through analyzing non-conformity trends and control factors according to certification audit for finance-related organizations introduced international ISMS of ISO27001 which is well known and commonly applicable irrespective of areas in financial service industry. Through case analyses for five finance-related organizations operating ISMS, this study analyzed improvement effects of ISMS. It has a meaning as an initial research though it was difficulty in acquiring data for empirical study because of rare organizations maintaining certification in financial sector. As a result, number of non-confirmity from the first audit to three years' elapse was decreased every year. Physical and environmental security, communication and operations management, and access control having the highest frequency of non-conformity each presented 23%, 19%, and 17%, which reached 59% in total and they are derived into primary control areas. ISMS can fulfill technical, managerial, physical security issues, which have not been treated importantly in financial industry. In addition, this study presented that ISMS can be an effective management system applicable for financial service industry.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.55-66
• /
• 2015

In the perspective of industrial health management, it is important for the employee to decrease their job stress, to improve their productivity and quality of labor. In this study, the job stress, and it's influence on PWI(Psychosocial Wellbeing Index) were investigated by the questionnaire survey of 138 industrial workers who had studied assistive technology in college. The contents of questionnaire consist of the demographic characteristics, job-related characteristics, job stress and psycho-social stress. We evaluated job stress by KOSS-SF(Korean Occupational Stress Scale-Sort Form) and psychosocial stress by PWI-SF(Psychosocial Well-being Index-Short Form). To analyze the results, we evaluated the exposure level of KOSS and PWI by demographic characteristics and job-related characteristics using significance tests. Also, we estimated the relationship among demographic characteristics, job-related characteristics, job stress and psychosocial stress, using correlation analysis. As a results, all workers were found to be in a group under the high risky stress. It showed that the scale index of female's job non-autonomy and pwi were much larger than those of male's. Therefore, to guarantee job autonomy of female workers should be more emphasized, to improve their working environment. Job type had significant relationships with many job stress category; physical environment, job demand, job instability and organization culture. Regarding pwi, the scale index of the workers who is in charge of the civil service such as contacting the disabled and the aged in person, were much larger than that of the other workers. Accordingly, the job stress management program including physical environment, job demand, job instability and organization culture, should be suggested, to decrease the stress of the workers in charge of the disabled and the elders service. The strongest predictors of pwi was organization system through maximum positive relations between organization system and pwi. Therefore, it indicates that improvement of organization system such as a fair merit rating, a manpower supply, demand plan and department cooperation is urgently needed to reduce pwi.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.3
• /
• pp.298-307
• /
• 2023

Objectives: The purpose of this study is to analyze the recent trends in patients with work-related musculoskeletal disorders in South Korea and to check the major results by reviewing the literature on the risk factors and prevalence of musculoskeletal diseases related to work. Methods: Industrial disaster data from the Ministry of Employment and Labor from 2012 to 2021 were used, and the literature was reviewed regarding risk factors for musculoskeletal diseases related to work using PubMed and RISS. Results: The trend of patients with work-related musculoskeletal disorders has increased overall since 2017 after declining until 2016, with a particularly notable increase in the average annual number of patients with physical burden work. The average annual rate per ten thousand people for patients with body burden work, non-accidental lower back pain, and carpal tunnel syndrome among work-related diseases was high in the mining industry. The average annual rate per ten thousand people for patients with accidental lower back pain was the highest in the fishing industry. Within the manufacturing field, it was the highest in the shipbuilding and ship repair industry. As a result of the literature review, the search rate for work-related musculoskeletal disease papers in unstructured work was high. In addition, physical stress factors were high among risk factors, and pain areas showed a high rate for the waist. Conclusion: Even after the institutional implementation of a hazard investigation system related to musculoskeletal diseases is implemented, the number of patients with occupational musculoskeletal disorders continues to increase. Therefore, it is necessary to conduct regular surveys and implement effective improvement activities for vulnerable industries or occupations.

• Journal of International Academy of Physical Therapy Research
• /
• v.3 no.1
• /
• pp.356-363
• /
• 2012

This study was carried out to identify how a self-stretching exercise program affects pain for each body area, pain relief and job satisfaction for care workers. 20 of 40 care workers with musculoskeletal symptom were randomly selected and participated a self-stretching exercise program consisting of 15 motions. The intervention was done five times or more per weeks for 8 weeks and 1 session lasted within 15 minutes. 'Musculoskeletal symptom survey table' of the Korea Occupational Safety and Health Agency(KOSHA) and JDI(Job Descriptive Index) was used for pain on the musculoskeletal symptom and job satisfaction. Survey were done twice before and after the program. The result of this study showed that self-stretching exercise program group(SSPG) relieved from pain significantly in the shoulders(p<.01) and lumbar(p<.05), comparing to the non self-stretching exercise program group(NSPG). Although no significant difference on variations in the JDI appeared in SSPG, the significant reduction appeared from the colleague relationship and organization in NSPG(p<.05). SSPG showed the significant increase on variations in JDI from the job and organization comparing to NSPG. Especially, the improvement on satisfaction for the organization was shown(p<.05). Accordingly, the self-stretching exercise program for care workers can be said to positively affect the overall pain relief and increase on the JDI.

• Advances in Computational Design
• /
• v.3 no.3
• /
• pp.233-267
• /
• 2018

Conventional seismic design of concentrically braced frame (CBF) structures suggests that the gusset plate connecting a steel brace to beams and/or columns should be designed as non-dissipative in earthquakes, while the steel brace members should be designed as dissipative elements. These design intentions lead to thicker and larger gusset plates in design on one hand and a potentially under-rated contribution of gusset plates in design, on the other hand. In contrast, research has shown that compact and thinner gusset plates designed in accordance with the elliptical clearance method rather than the conventional standard linear clearance method can enhance system ductility and energy dissipation capacity in concentrically braced steel frames. In order to assess the two design methods, six cyclic push-over tests on full scale models of concentric braced steel frame structures were conducted. Furthermore, a 3D finite element (FE) shell model, incorporating state-of-the-art tools and techniques in numerical simulation, was developed that successfully replicates the response of gusset plate and bracing members under fully reversed cyclic axial loading. Direct measurements from strain gauges applied to the physical models were used primarily to validate FE models, while comparisons of hysteresis load-displacement loops from physical and numerical models were used to highlight the overall performance of the FE models. The study shows the two design methods attain structural response as per the design intentions; however, the elliptical clearance method has a superiority over the standard linear method as a fact of improving detailing of the gusset plates, enhancing resisting capacity and improving deformability of a CBF structure. Considerations were proposed for improvement of guidelines for detailing gusset plates and bracing members in CBF structures.

• Journal of Biomedical Engineering Research
• /
• v.44 no.6
• /
• pp.465-475
• /
• 2023

In this study, we demonstrated a silica nanofibrous membrane based on the electrospinning process and evaluated its DNA isolation and purification performance in PCR pretreatment. Generally, silica membranes made of non-woven fabric are used for PCR pretreatment, but this study aimed to improve the efficiency of the pretreatment process by developing a nanofiber-type silica membrane with high specific surface area and porosity. In order to manufacture a nanofiber-shaped silica film while maintaining the original physical properties of silica, nanofiber membranes produced by adding various concentrations of PEO (5 wt%, 8 wt%, and 10 wt%) to silica prepared by the sol-gel method were compared. In terms of nanofiber membrane production, the higher the PEO concentration, the more effective it was in producing nanofiber membranes. The produced silica nanofiber membrane was inserted to a pretreatment device used in commercial PCR equipment, and the pretreatment performance was compared and verified using Salmonella bacteria. When Salmonella was used, samples containing 5 wt% PEO showed superior PCR efficiency compared to samples containing 8 wt% and 10 wt% PEO. These results show that adding 5 wt% of PEO can effectively improve DNA purification and separation by producing a nanofiber-shaped silica film while maintaining the physical properties of silica. We expect that this study will contribute to the development of effective PCR pretreatment technology essential for various molecular biology applications.

• The Journal of Korean Physical Therapy
• /
• v.32 no.4
• /
• pp.250-257
• /
• 2020

Purpose: This study examined the effects of training using the slime on the hand function and problem behavior in adults with intellectual disabilities. Methods: Five adults with intellectual disabilities who were judged as Level 1 or Level 2 were selected. The training consisted of one session (50 min)/day, one day/week for 10 weeks (preparatory activities: 5 min, slime activities: 40 min, finishing activities: 5 min) The functions of the hand (Purdue Pegboard Test [PPT], grip strength test [GST]) and problem behavior (Korean Behavior Problems Inventory [KBPI]) were assessed three times (first assessment; pre, second assessment; post-5 weeks, third assessment; post-10 weeks). Wilcoxon signed-rank tests were used to analyze changes in the subjects' performance before and after the intervention. Results: In the PPT, the use of the non-dominant hand was increased significantly (p<0.05). No significant differences were observed in the remaining results, but the mean value increased. In addition, although the problem behavior was not statistically significant, an increase in the problem behavior score was noted. Conclusion: The training using the slime for adults with intellectual disabilities is effective in hand function improvement and reducing problem behavior.

• Journal of Korean Academy of Nursing
• /
• v.48 no.2
• /
• pp.182-194
• /
• 2018

Purpose: This study aimed to estimate the effects of a health mentoring program on fasting blood sugar, total cholesterol, triglyceride, physical activity, self care behavior and social support changes among community-dwelling vulnerable elderly individuals with diabetes. Methods: A non-equivalent control group pre-post-test design was used. Participants were 70 community-dwelling vulnerable elderly individuals with diabetes. They were assigned to the experimental (n=30) or comparative (n=30) or control group (n=28). The experimental group participated in the health mentoring program, while the comparative group participated in health education program, the control group did not participate in any program. Data analyses involved a chi-square test, Fisher's exact test, a generalized linear model, and the Bonferroni correction, using SPSS 23.0. Results: Compared to the control group, the experimental and comparative groups showed a significant decrease in fasting blood sugar, total cholesterol, and triglyceride. Compared to the comparative and control groups, the experimental group showed significant improvement in self care behavior. However, there were no statistical differences in physical activity or social support among the three groups. Conclusion: These findings indicate that the health mentoring program is an effective intervention for community-dwelling vulnerable elderly individuals with diabetes. This program can be used as an efficient strategy for diabetes self-management within this population.

• Journal of Society of Preventive Korean Medicine
• /
• v.8 no.1
• /
• pp.135-145
• /
• 2004

This study tried to analyze influencing factors on self-perceived health status(SPHS) of labors in workplace. and suggested the preventive oriental medicine approaches in occupational health care. 914 data for research were collected through the process of oriental health examination with questionnaire in workplace and collected data were analyzed with frequency, homogeneity and correlation statistically. The results were as follows : 1) The distributions of SPHS was 58.4% of healthy group. 41.6% of unhealthy group. 2) For the difference of SPHS by stress, the high level stress group was more included in healthy group(p<0.05). 3. For the difference of SPHS by health behavior. the higher score of health behavior group was more included in healthy group. There was statistically significant difference of SPHS in physical exercise, but not in smoking, drinking, sleeping and body mass index. 4. For the difference of SPHS by the latest health examination results, non-disease group was more included in healthy group, while disease group was more included in unhealthy group. From the above results, SPHS was influenced by stress, health behavior, the latest health examination results. Therefore oriental medical service for occupational health must be interested in the these influencing factors and make an effort to change their perception of health as well as physical improvement.