• Title/Summary/Keyword: Physical Experiments

검색결과 1,506건 처리시간 0.028초

인장 분지 형성을 구현하기 위한 상사 모델링 벤치마크 실험 및 원심모형실험의 적용성 평가 (A benchmark experiment for analogue modeling of extensional basin formation and evaluation of applicability of centrifuge test)

  • 이성복;박헌준
    • 지질학회지
    • /
    • 제54권6호
    • /
    • pp.605-614
    • /
    • 2018
  • 지질학적 현상을 연구하는 물리적 실험의 경우, 반복성 있는 현상 재현이 가능할 때 실험의 신뢰성을 증대시킬 수 있다. 본 연구에서는 인장력에 의해 발생한 정단층 구조를 대상으로 모형 토조를 이용한 벤치마크 실험을 수행하였다. 이를 위해 모형 실험의 상사성을 검토하고, 벤치마크 실험에서와 같은 방법으로 실험 재료와 인장조건, 그리고 경계조건을 설정하여 실험을 수행하였다. 또한 대형 원심모형실험시설을 이용하여 동일한 크기의 모형에서 원심중력가속도와 인장 속도를 변화시켜 인장 거동 시의 물리량에 대한 상사비를 고려하였다. 1 g 상태에서의 벤치마크 실험과 10 g 상태에서의 원심중력장에서 일정한 속도의 인장 응력을 구현하고, 지표면의 형상을 신뢰성 있게 계측하였다. 이를 통해 지각의 변형 실험 연구를 수행 시, 대형 원심모형실험의 신뢰성과 적용성을 평가하였다.

문자의 크기지각에 대한 실험연구 (An Experimental Study for Letter Size Perception)

  • 김현정;백진경
    • 디자인학연구
    • /
    • 제19권5호
    • /
    • pp.181-190
    • /
    • 2006
  • 본 연구는 배경과 시각도, 물리적 크기, 자간, 인지방향 등의 요소가 대상 문자의 크기지각에 어떠한 영향을 미치고 있는지에 대해 검토한 것으로 실험 I에서는 숫자를 대상으로 실험 II에서는 한글을 대상으로 크기지각에 대한 실험연구를 진행했다. 실험 I에서는 숫자를 대상으로 2수준의 배경과 3수준의 시각도, 9수준의 물리적 크기를 변화시킨 54 종류의 Task에 대한 크기평가가 시행되었으며, 실험 II에서는 한글을 대상으로 9수준의 물리적 크기, 2수준의 배경, 3수준의 방향, 2수준의 자간요소들을 변화시킨 108 종류의 Task에 대한 크기평가가 실시되었다. 실험 I, II 모두 크기지각에 대한 측정방법으로는 매그니튜드 측정법이 사용되었다. 실험 I의 결과, 숫자의 크기지각에 배경과 시각도, 물리적 크기가 영향을 미치고 있음이 증명되었으며, 물리적 크기 100 (기준자극의 크기) 이상의 대상들에 대해 지각적 크기의 과소시가, 100이하의 대상들에 대해서는 과대시 경향이 나타났다. 그리고 이러한 경향은 Delboeuf 착시효과가 문자의 크기지각에도 나타나고 있음을 시사했다. 실험 II의 결과, 한글의 크기지각에 있어 물리적 크기, 자간, 인지방향 등의 요소가 대상의 지각에 영향을 미치고 있음이 증명되었으며, 자간, 인지방향에 의한 크기착시 역시 주변 문자와의 관계에 의한 것으로 고찰 검토되었다.

  • PDF

AVHRR/SST로 부터 표층유속을 추정하기 위한 역행렬 모델에서 가중치의 설정 (Determination of Weighting Factor in the Inverse Model for Estimating Surface Velocity from AVHRR/SST Data)

  • 이태신;정종률;강현우
    • 한국해양학회지
    • /
    • 제30권6호
    • /
    • pp.543-549
    • /
    • 1995
  • 연속된 AVHRR/SST 자료를 이용한 표층유속의 추정에 역행렬법이 이용되어 왔다. 본 모델에서 방정식체계는 열방정식과 제한요소로서 가중치가 있는 발산최소화이다. 제한요소는 열방정식의 속도해중에서 null space(Menke, 1984)에 해당하는 해를 구하기 위하여 도입되었으며 이 식들은 격자화한 영역에서 AVHRR/SST의 수온경사에 의해 선형화된다. 실험은 열방정식에 대한 발산최소화의 상대적 중요성을 나타내는 가중치의 크기를 설정하기 위하여 수행하였으며 행렬식은 SVD(Singular Value Decomposion)에 의해 해를 구했다. 실험에서 가상온도분포의 수온경사와 가상유속장의 발산의 크기는 실제해역에 근사시켰다. 열방정식은 착산의 효과를 무시하고 열속이 공간적으로 일정한 것으로 가정하여 구성하였으며 이와같은 가정에 의한 오류를 고려하기 위하여 가상 온도자료에 무작위오류를 도입하였다. 실험결과에 의하면 가중치를 설정하는 기준으로서 상대오차 최소화가 잔차최소화보다 바람직한 것으로 나타났으며 가중치가 $10^{-1}$의 크기일 때 추정유속의 오류가 가장 작은것으로 나타났다.

  • PDF

모바일 인터넷 사용 성과와 만족도에 영향을 미치는 신체적 정황 요인에 관한 연구 (Do Diverse Physical Contexts Matter in Mobile Internet Use\ulcorner)

  • 류호성;최영완;김진우
    • 인지과학
    • /
    • 제12권4호
    • /
    • pp.1-9
    • /
    • 2001
  • 모바일 인터넷은 단말기의 휴대가 가능하고 무선으로 인터넷에 접속할 수 있기 때문에 언제 어디서나 사용할 수 있다. 따라서 고정된 환경에서 사용하게 되는 유선 인터넷에 비해 모바일 인터넷 사용자는 다양한 정황 속에서 인터넷을 사용하게 된다. 본 연구에서는 이러한 여러 가지 정황 요인 들 중에서 손과 다리 및 눈에 관한 신체 정황을 선택하여, 이들이 모바일 인터넷 사용 성과와 만족도에 미치는 영향에 관하여 연구하였다. 본 연구를 위해 각 정황에서 과제를 수행하는 통제된 실험을 실시했고, 과업의 정확도와 주관적인 만족도를 측정했다 연구 결과, 각각의 정황이 개별적으로 피험자들에게 주어졌을 때는 정확도와 만족도에 영향을 미치지 않았지만. 두 개 이상의 정황이 동시에 주어졌을 때, 즉 눈에 있어서 시각적인 방해와 다리에 있어서 보행이라는 정황이 동시에 주어졌을 때 정화도 및 만족도가 떨어졌다. 이것은 주의의 한계로 인해 피험자로 하여금 하나의 신체적 정황에 대한 주의 보다 둘 이상의 신체적 정황에 대한 주의가 더 필요하게 되었고 그 결과 과업을 수행하는 인지적 주의의 양이 줄어들었기 때문임을 시사하고 있다.

  • PDF

A Study on the Wave Formation and Hair Damage Levels Relating to the Uses of Treatments for Heat Permanent Waves

  • Kim, Kwan-Ok;Kim, Sung-Nam
    • 패션비즈니스
    • /
    • 제12권6호
    • /
    • pp.1-10
    • /
    • 2008
  • Public interest in healthy hairs gets growing as damaged hairs are seen more frequently with the generalization of heat permanent waves. For this study, experiments have been conducted to understand the influences on the changes in physical and morphological features of wave forms and damaged hairs, by collecting virgin hairs from the women in their mid-20's, who had not experienced chemical applications, and by dividing the applications of heat perm hair treatments, PPT(for pre-treatment) and LPP(for post-treatment), into the pre-treatment, the post-treatment, the pre & post-treatment, and the non-treatment. For the wave formations, curl waves were investigated by the bare eyes using the pictures taken by a digital camera. For the comparison of physical features, the experiments of tensile strength and elongation were done and their mean values were found. For the observations of morphological features, the pictures were taken by SEM for comparison. As for the findings, regarding the curl wave shapes of hairs, the most even and elastic S curl was formed in the case of non-treatment. In the physical features, both of the tensile strength and elongation showed a decreasing tendency in line with the hair damage levels, and the case of the pre & post-treatment indicated the tendency most similar to the control group. In the morphological features of the cuticle, observed with an SEM, the pre-treatment showed the higher possibility of reducing the cuticle damages than the post-treatment did. LPP was found to play the role of protective membrane for the post-treatment, and the pre & post-treatment turned out to reduce most effectively the cuticle damages.

An experimental study on tailings deposition characteristics and variation of tailings dam saturation line

  • Wang, Guangjin;Tian, Sen;Hu, Bin;Kong, Xiangyun;Chen, Jie
    • Geomechanics and Engineering
    • /
    • 제23권1호
    • /
    • pp.85-92
    • /
    • 2020
  • This study adopted soil test and laboratory physical model experiments to simulate the tailings impoundment accumulation process according to the principle of similarity. Relying on the practical engineering, it analyzed the tailings deposition characteristics on dry beach surface during the damming process, as well as the variation rules of dam saturation line. Results suggested that, the tailings particles gradually became finer along the dry beach surface to inside the impoundment. The particle size suddenly changed at the junction between the deposited beach and the water surface, which displayed an obvious coarsening phenomenon. Besides, the deposited beach exhibited the vertical feature of coarse upward and fine downward on the whole. Additionally, in the physical model, the saturation line elevated with the increase in dam height, and its amplitude was relatively obvious within the range of 1.0-4.5 m away from the initial dam. Under flood condition, the saturation line height was higher than that under normal condition on the whole, with the maximum height difference of 4 cm. This study could provide an important theoretical basis for further studies on dam failure experiments and the evolution rules of leaked tailings flow.

제품과 인체의 통합 모델을 바탕으로 한 스미스 스쿼트 운동의 가상 시험 프레임워크 (Virtual Test Framework for Smith Squat Exercise Based on Integrated Product-Human Model)

  • 이해린;정문기;이상헌
    • 대한기계학회논문집A
    • /
    • 제41권8호
    • /
    • pp.691-701
    • /
    • 2017
  • 본 연구에서는 스미스 머신을 이용한 스쿼트 운동에 대한 가상 테스트 프레임웍을 제안하고 구현하였다. 이를 위하여 인체 및 제품의 통합 모델을 개발하고, 실험 데이터를 바탕으로 자세의 변화에 따른 새로운 동작을 생성하는 알고리즘을 개발한 후, 가상의 조건에서 동작을 생성하여 인체의 관절에 걸리는 토크와 근육에 걸리는 힘을 시뮬레이션 하는 전체 시스템을 개발하였다. 이 시스템을 검증하기 위하여 동작 수집과 더불어 EMG와 지면반력에 대한 데이터를 수집하여 시뮬레이션 결과가 실제와 잘 맞는지 확인하였다. 이 시스템을 확장시켜 사용한다면 다양한 조건에서 운동하였을 때 신체 근육과 관절에 어떤 영향을 끼치는 지 시뮬레이션 해봄으로써 적절한 운동 프로그램을 효과적으로 개발할 수 있을 것으로 기대된다.

SIMULATIONS OF TORUS REVERBERATION MAPPING EXPERIMENTS WITH SPHEREX

  • Kim, Minjin;Jeong, Woong-Seob;Yang, Yujin;Son, Jiwon;Ho, Luis C.;Woo, Jong-Hak;Im, Myungshin;Byun, Woowon
    • 천문학회지
    • /
    • 제54권2호
    • /
    • pp.37-47
    • /
    • 2021
  • Reverberation mapping (RM) is an efficient method to investigate the physical sizes of the broad line region (BLR) and dusty torus in an active galactic nucleus (AGN). The Spectro-Photometer for the History of the Universe, Epoch of Reionization and Ices Explorer (SPHEREx) mission will provide multi-epoch spectroscopic data at optical and near-infrared wavelengths. These data can be used for RM experiments with bright AGNs. We present results of a feasibility test using SPHEREx data in the SPHEREx deep regions for torus RM measurements. We investigate the physical properties of bright AGNs in the SPHEREx deep field. Based on this information, we compute the efficiency of detecting torus time lags in simulated light curves. We demonstrate that, in combination with complementary optical data with a depth of ~ 20 mag in B-band, lags of ≤ 750 days for tori can be measured for more than ~ 200 bright AGNs. If high signal-to-noise ratio photometric data with a depth of ~ 21-22 mag are available, RM measurements are possible for up to ~ 900 objects. When complemented by well-designed early optical observations, SPHEREx can provide a unique dataset for studies of the physical properties of dusty tori in bright AGNs.

계면활성제를 이용한 오염 토양 세정 성능 평가 (Performance of Soil Flushing for Contaminated Soil Using Surfactant)

  • 이채영;장영수
    • 한국지반환경공학회 논문집
    • /
    • 제12권6호
    • /
    • pp.17-23
    • /
    • 2011
  • 본 연구에서는 석유계총탄화수소와 톨루엔을 토양세정에 의해 제거하기 위하여 일련의 실험을 수행하였다. 회분식 실험 결과 Triton X-100과 SWA 1503의 경우 각각 79.0%와 69.0%의 TPH 제거효율을 나타내었다. 계면활성제의 농도 1-11mmol/L에서 계면활성제 농도 증가에 따라 TPH 제거효율은 증가하였으나 주입량 대비 제거효율 고려 시 최적 농도는 1mmol/L로 나타났다. 칼럼 실험 결과 최적의 유속은 0.3mL/min으로 나타났다. PAM(Physical Aquifer Model) 실험 결과 3 PV(Pore Volume) 동안 토양세정을 통해 주입한 톨루엔 중 약 5.5%가 제거된 것으로 나타났다. 따라서 토양세정의 효율을 증가시키기 위해서는 계면활성제의 재순화 또는 재이용을 통한 최적 운전조건의 도출이 필요하다.

치과용 레진의 항균성 및 물리·기계적 특성에 대한 연구 (A Study on the Antibiosis and Physical & Mechanical Characteristics of Dental Resin)

  • 김주원;최성숙
    • 한국치위생학회지
    • /
    • 제4권2호
    • /
    • pp.179-191
    • /
    • 2004
  • A series of experiments were conducted on dental denture base resins for their antibiosis. They were also compared in terms of physical and mechanical characteristics, which led to the following results: 1. As for bacterial deposition, the old products showed a wide range of distribution, while those products containing C. S. had restraints. 2. Among the products containing C. S., those ones of 7, 12 and 20% all had restraints of similar size to slop further bacterial growth. In the meanwhile, the old products had only small-size restraints for bacterial growth. 3. The following changes were observed in the aspect physical characteristics: There were no significance between the old products and the C. S. products. Thus, as for compressive force, the average${\pm}$standard deviation of the old products was $27.4083.{\pm}1.7397$, and those C. S. products of 20% showed the similar $27.5600{\pm}.1976$. In addition, there were no significance between the old products and those ones containing C. S. in terms of tensile force. The tensile force of the old products was $114.5600{\pm}.8916$ in average${\pm}$standard deviation, while there was no differences among the C. S. products of 7, 12, and 20% in that matter.

  • PDF