• Journal of the Semiconductor & Display Technology
• /
• v.8 no.3
• /
• pp.25-30
• /
• 2009

In this study, we synthesized novel UV-curable binders and applied for negative photoresist of display device. First, we synthesized UV-curable binders by radical polymerization with a mixture of Styrene/Methyl methacrylate/Methacrylic acid/Glycidyl methacrylate/N-Cyclohexylmaleimide at a fixed composition. Following the first step, we prepared a negative photoresist mixture optimized with photo sensitive initiator and others for the litho test. And then, we studied resolution and film retention with molecular weight of each binders and numerical value of Alkaline Desolution Rate(ADR). As a result of the litho test, we found that if the novel polymers have same numerical value of ADR, the resolution decreased and the film retention increased with the increasing of molecular weight of photoresist binder.

• 연구논문집
• /
• s.33
• /
• pp.99-109
• /
• 2003

Recently the utilization of the ozone dissolved de-ionized water(DIW-$O_3$) in semiconductor wet cleaning process and photoresist stripping process to replace the conventional sulfuric acid and hydro peroxide mixture(SPM) method has been studied. In this paper, we propose the water-electrode type ozone generator which has the characteristics of the high concentration and purity to produce the high concentration DIW-$O_3$ for the photoresist strip process in the semiconductor fabrication. The proposed ozone generator has the dual dielectric tube structure of silent discharge type and the water is both used to electrode and cooling water. Through this study, we obtained the results of the 10.3 wt% of ozone gas concentration at the oxygen gas of 0.5 [liter/min.] and the DIW-$O_3$ concentration of 79.5 ppm.. Through the photoresist stripping test using the produced DIW-$O_3$, we confirmed that the photoresist coated on the silicon wafer was removed effectively in the 12 minutes.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.2
• /
• pp.23-28
• /
• 2013

Microlens array as basic element of the optical system have been fabricated with various focal length (mainly with long focal length) depending on the purpose of application. In this paper, the microlens arrays were fabricated for observing fluorescent images within sol-gel. Though the fluorescent signal is very low, the microlens array can help obtaining clear images through extracting the fluorescent light from sol-gel. We fabricated microlens arrays with short focal length, which can extract the light using photoresist thermal reflow method. In the experiment, the diameter of microlens decreased after thermal reflow because the solvent within the photoresist was vaporized. Therefore, to compensate the shape error by this reduction, microlens diameter in photomask was altered and spin-coat recipe of photoresist were modified.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.374-378
• /
• 2007

Water-soluble terpolymer of acrylamide, diacetone acrylamide, and acrylic acid was prepared by redox initiators in aqueous medium. One component photoresist was synthesized by reaction of terpolymer with 4-azidoaniline. By blending the aqueous acrylamide/diacetone acrylamide copolymer solution with bisazide, 4,4'-diazidostilbene -2,2'-disulfuric acid sodium salt, two component photoresist was prepared. The photosensitivity per azido group unit mole of one component photoresist was 4 times higher than that of two component photoresist. The dot-type pattern was successfully achieved with one component photoresist at low exposure energy, which is prospective to be used as black matrix negative photoresist.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.9
• /
• pp.1351-1354
• /
• 2002

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.2
• /
• pp.45-54
• /
• 2008

We have manufactured a photoresist which has excellent dispersity and good applying property due to 330 cps of viscosity for environment-friendly and economical maskless screen plate making. And the photoresist applied on the screen stretched was exposed with mask by UV-LED light source so we could manufacture the photoresist which proper for the UV light source. And it was developed by air spray with $1.7\;kgf/cm^2$ of injection pressure. Because of the excellence of power and resolution of the UV-LED light sourse, the pencil hardness and solvent resistance of curing photoresist film were excellent as those of conventional photoresist film. Moreover the $100{\mu}m$-width stripe image which has sharp edges was formed. So we confirmed a possibility of dry development process by air spray method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4467-4471
• /
• 2013

In this research, developed full-scan photoresist coating system(FPCS) can improve the efficiency of the photoresist coating system essential for spinner equipment in nano semiconductor manufacturing process. The devices developed in this research, which can be swiftly replaced in case abnormal state element changes or wafer manufacturing defect occurs, are anticipated to improve module yield as well as real-time monitoring on the state element in order to prevent the complex process defect due to the photoresist miss coating.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.274.2-274.2
• /
• 2013

We described a simple and efficient fabrication method for generating microfluidic channels with a circular-cross sectional geometry by exploiting the reflow phenomenon of a thick positive photoresist. Initial rectangular shaped positive photoresist micropatterns on a silicon wafer, which were fabricated by a conventional photolithography process, were converted into a half-circular shape by tuning the temperature to around $105^{\circ}C$. Through optimization of the reflow conditions, we could obtain a perfect circular micropattern of the positive photoresist, and control the diameter in a range from 100 to 400 ${\mu}m$. The resultant convex half-circular photoresist was used as a template for fabricating a concave polydimethylsiloxane (PDMS) through a replica molding process, and a circular PDMS microchannel was produced by bonding two half-circular PDMS layers. A variety of channel dimensions and patterns can be easily prepared, including straight, S-curve, X-, Y-, and T-shapes to mimic an in vivo vascular network. To inform an endothelial cell layer, we cultured primary human umbilical vein endothelial cells (HUVECs) inside circular PDMS microchannels, and demonstrated successful cell adhesion, proliferation, and alignment along the channel.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.1
• /
• pp.25-33
• /
• 1998

Photoresist is defined as substance that makes chemical changes in its solubility, colouring and hardening by light energy. In this study, photosensitive photoresists of the positive type for a printing plate were studied. PF, o-, m-, p-CF resins as a matrix resin were synthesized at an identical condition. Photoresists were prepared by mixing NDS derivatives with a matrix resin at various mixing ratios. Characteristics of photoresists were studied by yield method of residual using solubility and Optical microscope was also analyzed. Prepared photoresist using NDS derivatives shows excellent photosensitivity and solubility compared with commercial product. The mixing ratio of 1:4(by mass) of NDS derivative[III] and m-CF resin shows the highest dissoultion rate among others. In addition, photoresist was obtained at this condition resulted in the superior sensitivity and contrast.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.541-542
• /
• 2009

We have developed an image reversal photoresist with high thermal stability and electric insulating properties for the single isolation structure of OLEDs. The thermal stability and electric insulating properties are investigated and compared with those of conventional insulator and cathode separator materials. The single isolation structure using the image reversal photoresist reduces the fabrication process steps and cuts down the manufacturing cost.