• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.241-242
• /
• 2012

산화아연 씨앗층을 졸-겔 스핀코팅법으로 석영기판위에 증착시킨 후, 수열합성법을 이용하여 갈륨의 양을 0에서 2.0 at.% 으로 변화를 주어 갈륨이 도핑된 산화아연 나노막대를 성장하였다. 산화아연과 갈륨이 도핑된 산화아연 나노막대의 구조적 광학적 특성을 조사하기 위해 field-emission scanning electron microscopy, X-ray diffraction (XRD), photoluminescence (PL), 그리고 ultraviolet-visible spectroscopy를 이용하였다. 일정한 산화아연과 갈륨이 도핑된 산화아연 나노막대는 육각형형태로 성장하였다. XRD 데이터로부터, 산화아연과 갈륨이 도핑된 산화아연 나노막대의 스트레스는 각각 -0.022 (0 at.%), 0.097 (0.5 at.%), 0.165 (1.0 at.%), 0.177 (1.5 at.%), 0.182 GPa (2.0 at.%) 였다. PL 스펙트라에서 얻어진 반가폭(The full width at half maximum)은 갈륨의 양이 0에서 2.0 at.%로 증가함에 따라 127에서 171 meV로 증가하였다. Urbach 에너지는 68 (0 at.%), 97 (0.5 at.%), 108 (1.0 at.%), 104 (1.5 at.%), 127 meV (2.0 at.%)였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.243-244
• /
• 2012

산화아연 나노구조를 금을 금속촉매로 사용하여 실리콘 기판위에 기상이동법으로 성장하였다. 성장할 때 소스(source)와 기판 사이의 거리는 5에서 50 mm로 변화를 주며 아르곤과 산소 분위기에서 $900^{\circ}C$로 성장하였다. 산화아연 나노구조의 구조적 및 광학적 특성을 조사하기 위해 field-emission scanning electron microscopy, X-ray diffraction (XRD), 그리고 photoluminescence (PL)를 이용하였다. 산화아연 나노구조는 나노선과 나노입자의 형태로 성장하였다. 산화아연 나노구조의 광학적 특성은 소스와 기판사이의 거리가 가까울수록 향상되었다. 특히, 소스와 기판사이의 거리가 5 mm 일 때, 산화아연 나노선이 관찰되었으며 XRD 와 PL 분석에서 나타난 반가폭 (full width at half maximum)은 $0.061^{\circ}$ 와 96 meV로써 가장 작았다. 산화아연 나노선은 산화아연 나노입자와 비교하여, 결정성 및 광학적 특성이 우수하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.245-246
• /
• 2012

Al 농도를 0 부터 2 at.% 까지 조절하여 도핑된 $Cd_{0.5}Zn_{0.5}O$ 박막을 석영 기판 위에 성장하였다. Al 도핑된 $Cd_{0.5}Zn_{0.5}O$ 박막의 구조적, 광학적 특성을 조사하기 위해 field-emission scanning electron microscopy, X-ray diffraction (XRD), photoluminescence (PL), 그리고 ultraviolet-visible (UV) spectroscopy을 사용하였다. 광학적 밴드갭은 Al 도핑 농도가 증가함에 따라 2.874 (0 at.%), 2.874 (0.5 at.%), 3.029 (1.0 at.%), 3.038 (1.5 at.%), 3.081 eV (2.0 at.%)로 증가하였다. Urbach energy는 도핑 농도에 따라 각각 464 (0 at.%), 585 (0.5 at.%), 571 (1.0 at.%), 600 (1.5 at.%), 470 meV (2.0 at.%)이었다. 또한, Al 농도가 증가함에 따라 $Cd_{0.5}Zn_{0.5}O$ 박막의 표면, 구조적 및 광학적 특성이 크게 변화되었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.349-350
• /
• 2012

Porous silicon (PS) was prepared by electrochemical anodization. Ultra-thin zinc oxide (ZnO) capping layers were deposited on the PS by plasma-assisted molecular beam epitaxy (PA-MBE). The effects of the ZnO capping layers on the properties of the as-prepared PS were investigated using scanning electron microscopy (SEM) and photoluminescence (PL). The as-prepared PS has circular pores over the entire surface. Its structure is similar to a sponge where the quantum confinement effect (QCE) plays a fundamental role. It was found that the dominant red emission of the porous silicon was tuned to white light emission by simple deposition of the ultra-thin ZnO capping layers. Specifically, the intensity of white light emission was observed to be enhanced by increasing the growth time from 1 to 3 min.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.236-237
• /
• 2012

ZnO nanorods were grown on R-plane sapphire substrates with the seed layers annealed at different temperature. The effects of annealing temperature for the seed layers on the properties of the ZnO nanorods were investigated by scanning electron microscopy, X-ray diffraction, UV-visible spectroscopy, and photoluminescence. For the as-prepared seed layers, the ZnO nanorods and the ZnO nanosheets were observed. Only the ZnO nanorods were grown as the annealing temperature was above $700^{\circ}C$. The optical transmittance in the UV region was almost zero while that in the visible region was gradually increased as the annealing temperature increased to $700^{\circ}C$. The optical band gap of the ZnO nanorods was increased as the annealing temperature increased to $700^{\circ}C$. In the visible region, the refractive index was decreased with increasing the wavelength, and the extinction coefficient was decreased as the annealing temperature increased to $700^{\circ}C$. The non-linear exciton radiative life time of the FX emission peak was established by cubic equation. The values of Varshni's empirical equation fitting parameters were ${\alpha}=4{\times}10^{-3}eV/K$, ${\beta}=1{\times}10^4K$, and $E_g(0)=3.335eV$ and the activation energy was found to be about 94.6 meV.

• 한국응용과학기술학회지
• /
• 제15권1호
• /
• pp.91-97
• /
• 1998

Thin films of $Eu(TTA)_3(phen)$, which was known to show red-light emitting properties, were deposited under various deposition condition. The thickness, surface morphology, and photoluminescence(PL) were measured with ${\alpha}$-step profiler, Atomic Force Microscopy(AFM), and PL measurement apparatus. It was found that the thickness of $Eu(TTA)_3(phen)$ film can be controlled precisely by adjusting the amounts of $Eu(TTA)_3(phen)$ in the boat. As the thickness of these films increases, the surface roughness also increases. A structure of $Al/Eu(TTA)_3(phen)(850{\AA})/TPD(600{\AA})/ITO$ was fabricated, Electroluminescence(EL) spectrum of which shows the peak at the wavelength of 618nm.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.109-116
• /
• 2018

$Eu_2(SO_4)_3$ was synthesized by chemical precipitation method and the crystal structure was determined by Rietveld analysis. The compound crystallizes in monoclinic space group C2/c. In the air environment, $Eu_2(SO_4)_3$ is stable up to $670^{\circ}C$. The sample of $Eu_2(SO_4)_3$ was examined by Raman, Fourier-transform infrared absorption and luminescence spectroscopy methods. The low site symmetry of $SO_4$ tetrahedra results in the appearance of the IR inactive ${\nu}_1$ mode around $1000cm^{-1}$ and ${\nu}_2$ modes below $500cm^{-1}$. The band intensities redistribution in the luminescent spectra of $Eu^{3+}$ ions is analyzed in terms of the peculiarities of its local environment.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.51-56
• /
• 2019

LuAG:Ce(Lu₃Al₅O₁₂:Ce³⁺) nano phosphor were synthesized by applying the coprecipitation method. It is used to increase the color rendering of phosphor ceramic plate for high power LEDs and laser lighting. Internal quantum efficiency and absorption of LuAG:Ce nano phosphor are 51.5 % and 64.4 %, respectively, which is higher than the previously studied nano phosphors. The maximum absorption wavelength of this phosphor is 450 nm blue light, and the emission wavelength is 510 nm. The emission wavelength shifted to longer wavelength when the concentration of Ce increased in the heat treatment of the reducing atmosphere. Thermal quenching of LuAG nano phosphor was 70 % at 200 ℃, it was explained by their significant quenching of all raman scattering modes, implying the restriction of electron-phonon couplings caused by their defects.

• Electronic Materials Letters
• /
• 제14권6호
• /
• pp.739-748
• /
• 2018

ZnS nanowalls, microspheres and rice-shaped nanoparticles have been successfully grown on graphene oxide (GO) sheets by the hydrothermal method. The morphologies, structures, chemical compositions and optical properties of the as-synthesized GO/ZnS have been characterized by X-ray power diffraction, energy dispersive spectrometer, scanning electron microscope, Raman spectra, photoluminescence spectroscopy and ultraviolet-visible absorption spectroscopy. It was found that the concentration of CTAB and the reaction temperature were important in the formation of GO/ZnS microstructures. The photocatalytic activity of the as-synthesized GO/ZnS was investigated through the photocatalytic degradation of textile dyeing waste. Results showed that the catalytic activity of the GO/ZnS porous spheres to methyl orange and methylene blue is higher than those of other samples. The degradation rates of methyl orange and methylene blue by porous spheres in 50 min were 97.6 and 97.1%, respectively. This is mainly attributed to the large specific surface area of GO/ZnS porous spheres and high separation efficiency between photogenerated electron and hole pairs.

• 한국재료학회지
• /
• 제29권2호
• /
• pp.79-86
• /
• 2019

A heterogeneous photocatalytic system is attracting much interest for water and air purification because of its reusability and economical advantage. Electrospun nanofibers are also receiving immense attention for efficient photocatalysts due to their ultra-high specific surface areas and aspect ratios. In this study, ZnO nanofibers with average diameters of 71, 151 and 168 nm are successfully synthesized by facile electrospinning and a subsequent calcination process at $500^{\circ}C$ for 3 h. Their crystal structures, morphology features and optical properties are systematically characterized by X-ray diffraction, scanning electron microscopy, UV-Vis and photoluminescence spectroscopies. The photocatalytic activities of the ZnO nanofibers are evaluated by the photodegradation of a rhodamine B aqueous solution. The results reveal that the diameter of the nanofiber, controlled by changing the polymer content in the precursor solution, plays an important role in the photocatalytic activities of the synthesized ZnO nanofibers.