• Applied Science and Convergence Technology
• /
• v.25 no.6
• /
• pp.162-165
• /
• 2016

APhotocatalysis process uses ambient oxygen from air and irradiation, fundamentally UV light, to generate oxidation and reduction which can degrade almost all harmful organic and inorganic compounds to nontoxic substances. This study was focused on enhancement of photocatalytic activity which improves the photocatlytic efficiency with $TiO_2$ particle by mixing of certain amounts of Zn particles. We analyzed degradation of organic pollutant materials such as toluene and phenol with the mixed photocatalysis by using UV-visible spectrophotometer and obtained a result that photocatalytic activity is increased with increasing amount of Zn particle. Especially, in the case of $TiO_2$ (1 mmol) and Zn (0.1 mmol) mixture photocatalyst, we obtained at least 2 times higher photocatalytic activity compared with the commercially available $TiO_2$ photocatalyst (Degussa P-25), indicating that our mixed photocatalyts (Zn-doped $TiO_2$) is very effective of removing both organic dye and pollutants and the conversion rate of toluene is much faster than that of phenol.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.926-927
• /
• 2006

[ $Sr_2Ta_2O_7$ ], a layered perovskite compound, has been reported to possess most excellent photocatalytic properties among the layered perovskite materials. Recently, we have demonstrated that $Ba_5Ta_4O_{15}$ that was prepared under a mol ratio of Ba: Ta=1:1 has high photocatalytic performance as well as $Sr_2Ta_2O_7$. In this study, the photocatalyst samples with a mol ratio of Sr: Ba: Ta = (1-x): x: 1 were prepared. The maximum photocatalytic performance was obtained for x= 0.2, which is three times as high as that of undoped $Sr_2Ta_2O_7$.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.1
• /
• pp.1-9
• /
• 2007

It prepared the $TiO_2$ powder which has photo-catalytic activity in the visible-light by the wet process with titanium oxysulfate. The titanium $dioxide(TiO_2)$ by the wet process creates a new absorption band in the visible light region, and is expected to create photocatalytic activity in this region. Anatase $TiO_2$ powder which has photocatalytic activity in the visible light region, is treated using microwave and radio-frequency(RF) plasma. But, the $TiO_2$ powder for the visible light region, which also can be easily produced by wet process. The wet process $TiO_2$ absorbed visible light between 400nm and 600nm, and showed a high activity in this region, as measured by the oxidation removal of aceton from the gas phase. The AH-380 sample appears the yellow color to be strong, the catalytic activity in the visible ray was excellent in comparison with the plasma-treated $TiO_2$. The AH-380 $TiO_2$ powder, which can be easily produced on a large scale, is expected to have higher efficiency in utilizing solar energy than the plasma-treated $TiO_2$ powder.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.4
• /
• pp.153-159
• /
• 2020

Photocatalytic decomposition of polyethylene film with TiO₂ nanotube powders (NTs) was investigated under UV irradiation at ambient conditions. TiO₂ NTs composed of individual nanotubes are prepared by rapid breakdown anodization technique. A comparative study on the photocatalytic decomposition of polyethylene-TiO₂ composite films prepared using TiO₂ nanoparticles (NPs) or TiO₂ NTs (NTs), respectively, was conducted under UV irradiation. Polyethylene film incorporated with TiO₂ NTs showed 26 wt% weight loss after 200 h under UV irradiation about two times faster decomposition rate than TiO₂ NPs which is attributed to large surface area of TiO₂ NTs.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.852-857
• /
• 2008

The immobilization technique is important to extend the application field of a photocatalyst. Titanium surface was changed into a $TiO_2$ thin film by the anodizing process. The anodized $TiO_2$ had photocatalytic activity, and showed sponge like shape. The photocatalytic degradation of gas phase acetaldehyde and VOCs by anodized titania has been studied in various initial concentrations, humidity and discharge potentials. The reactivity of anodized titania was increased with relative humidity, but excessive humidity led to a decrease of the reaction rate. The electric dark discharge that was combined with photocatalytic reaction enhanced the decomposition rate of the organic compounds. But excessively applied voltage caused corona discharge, which decreased the reaction rate. Optimum relative humidity was 40% and discharge potential was 5 kV under dark discharge region in photocatalytic reaction.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1110-1116
• /
• 2014

The cuprous oxide cubes with the special porous surface constructed by nano-prisms have been successfully fabricated by a solvothermal method. The template-free method is simple and facile without any surfactant. The X-ray powder diffraction (XRD) pattern suggests that the as-prepared product is the pure primitive cubic $Cu_2O$. The effects of the experimental parameters, such as the reaction temperature, reaction time and the concentration of sodium acetate anhydrous, on the morphologies of the products were investigated in detail by the scanning electron microscopy (SEM). Based on the time-dependent experiments, the possible formation mechanism was proposed. Using photocatalytic degrading reactive dyes as the model reaction and xenon lamp to simulate sunlight, the $Cu_2O$ cubes with the porous surface might possess higher photocatalytic activity than those of the commercial $Cu_2O$ powder in the visible-light region, indicating the excellent photocatalytic performance.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.1895-1899
• /
• 2012

$SiO_2$-coated $TiO_2$ composite materials with enhanced photocatalytic activity under UV light was prepared by a simple catalytic hydrolysis method. XRD, TEM, UV-vis spectroscopy, Photoluminescence, FT-IR and XP spectra were used to characterize the prepared samples. The obvious shell-core structure was shown for obtained $SiO_2$@$TiO_2$ sample. The average thickness of the $SiO_2$ coating layer was 2-3 nm. The interaction between $SiO_2$ and $TiO_2$ restrained the recombination of excited electrons and holes. The photocatalytic activities were tested in the degradation of an aqueous solution of a reactive dyestuff, methylene blue, under UV light. The photocatalytic activity of $SiO_2$@$TiO_2$ was much higher than that of P25 and mechanical mixing sample $SiO_2/TiO_2$. The possible mechanism for the photocatalysis was proposed.

• Journal of the Korean Ceramic Society
• /
• v.48 no.5
• /
• pp.433-438
• /
• 2011

In this study, CdS combined activated carbon/$TiO_2$ (CdS-AC/$TiO_2$) composites were prepared by a sol-gel method to improve the photocatalytic performance of $TiO_2$. These composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and UV-vis analysis. The photocatalytic activities were examined by the degradation of methylene blue (MB) under visible light irradiation. The photodegradation rate of MB under visible light irradiation reached 90.1% in 120 min. The kinetics of MB degradation was plotted alongside the values calculated from the Langmuir-Hinshelwood equation. The 0.2 CAT sample showed the best photocatalytic activity, which might be due to an increase in the photo-absorption effect by activated carbon and the cooperative effect of CdS.

• Journal of the Korean Ceramic Society
• /
• v.50 no.4
• /
• pp.269-274
• /
• 2013

ACF and ZnO modified $TiO_2$ composite materials (ZnO-ACF/$TiO_2$) were prepared by a sol-gel method. The composites were characterized by X-ray diffraction (XRD), energy dispersive X-ray (EDX) analysis and scanning electron microscope (SEM) analysis. A methyl orange (MO) solution under visible light irradiation was used to determine the photocatalytic activity. The degradation of the MO was determined using UV spectrophotometers. An increase in the photocatalytic activity was observed and attributed to an increase of the photo-absorption effect by the ZnO and the cooperative effect of the ACF.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1527-1532
• /
• 2013

The kinetics of photocatalytic degradation of gaseous acetaldehyde and methylethylketone(MEK) were studied by the batch scale of photo-reactor. Variable parameters were initial concentration of acetaldehyde and MEK, water vapor content, and temperature. The photocatalytic degradation rate was increased with increasing concentration of acetaldehyde and MEK, but maintained gentle increase beyond a certain concentration. The Langmuir-Hinselwood model was successfully applied to correlate experimental data. Water vapor inhibited the degradation reaction of acetaldehyde and MEK. The optimum reaction temperature was $45^{\circ}C$ for acetaldehyde and MEK.