• Bulletin of the Korean Chemical Society
• /
• 제28권5호
• /
• pp.816-820
• /
• 2007

Novel new red-light emitting perylene fluoroionophore N,N'-dipropyl-1,7-bis(calix[4]azacrown-5-crown-5)- 3,4,9,10-perylene tetracarboxy diimide (3) was prepared by reacting N,N'-dipropyl-1,7-dibromo-3,4,9,10- perylene tetracarboxy diimide (1) with calix[4]azacrown-5-crown-5. Also the alternating copolymer (4) with similar repeating unit was prepared reacting by calix[4]bisazacrown-5 with 1. Metal ion binding by 3 and 4 leads to a blue-shift of absorption band and emission spectra. When ionophoric characteristics were investigated by binding alkali, alkali earth metal and various metal ions, polymeric ionophores displayed large fluorescence decreasing effects with K+, Ag+ and Ba2+, which was rationalized by photo-induced charge transfer (PCT).

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1081-1088
• /
• 2013

Two new metal-free organic dyes bridged by anthracene-mediated ${\pi}$-conjugated moieties were successfully synthesized for use in a dye-sensitized solar cell (DSSC). A N,N-diphenylthiophen-2-amine unit in these dyes acts as an electron donor, while a (E)-2-cyano-3-(thiophen-2-yl)acrylic acid group acts as an electron acceptor and an anchoring group to the $TiO_2$ electrode. The photovoltaic properties of (E)-2-cyano-3-(5-((10-(5-(diphenylamino)thiophen-2-yl)anthracen-9-yl)ethynyl)thiophen-2-yl)acrylic acid (DPATAT) and (E)-2-cyano-3-(5'-((10-(5-(diphenylamino)thiophen-2-yl)anthracen-9-yl)ethynyl)-2,2'-bithiophen-5-yl)acrylic acid (DPATABT) were investigated to identify the effect of conjugation length between electron donor and acceptor on the DSSC performance. By introducing an anthracene moiety into the dye structure, together with a triple bond and thiophene moieties for fine-tuning of molecular configurations and for broadening the absorption spectra, the short-circuit photocurrent densities ($J_{sc}$), and open-circuit photovoltages ($V_{oc}$) of DSSCs were improved. The improvement of $J_{sc}$ in DSSC made of DPATABT might be attributed to much broader absorption spectrum and higher molecular extinction coefficient (${\varepsilon}$) in the visible wavelength range. The DPATABT-based DSSC showed the highest power conversion efficiency (PCE) of 3.34% (${\eta}_{max}$ = 3.70%) under AM 1.5 illumination ($100mWcm^{-2}$) in a photoactive area of $0.41cm^2$, with the $J_{sc}$ of $7.89mAcm^{-2}$, the $V_{oc}$ of 0.59 V, and the fill factor (FF) of 72%. In brief, the solar cell performance with DPATABT was found to be better than that of DPATAT-based DSSC.

• 한국식품조리과학회지
• /
• 제11권5호
• /
• pp.479-486
• /
• 1995

쌀소비 확대 및 곡분을 이용한 주식용 식품의 제조이용 방법으로서 혼합 곡분의 제빵 적성을 위한 반죽들의 물리적 성질을 측정한 결과 다음과 같았다. 각 재료의 혼합 반죽의 Farinograph에 의해 조사된반죽시간은 기타 곡분가루 비율이 높을수록 짧아졌고, 흡수율과 안정도는 감소했으며, 탄력도는 생콩가루첨가분을 제외하고는 밀가루와 비슷했다. Ex- tensograph에 의한 저항도와 신장도는 곡분 첨가량이 증가할수록 낮아졌고, Amylograph에 의한 호화 개시온도는 곡분의 첨가량에 따른 차이는 크지 않았으며, 최고점도는 크게 낮아졌다. SEM에 의한 반죽구조는기타 곡분 가루가 증가할수록 작은 전분입자들이 많아졌고, 밀집된 상태로 입자간의 구분이 어려웠다. 이러한 결과로 볼 때 찹쌀가루 30% 이상, 생콩가루20% 이상의 흔합 반죽을 제외하고는 제빵적성에 양호한 반죽들의 물리적 특성을 갖고있다고 사료된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집
• /
• pp.27-32
• /
• 2004

Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films. MDC flowing across monolayers is analyzed using a rod-like molecular model. A method for determining the dielectric relaxation time ${\tau}$ of floating 'monolayers on the water surface is presented. MDC floing across monolayers is analyzed using a rod-like molecular model. It is revealed that the dielectric relaxation time ${\tau}$ of monolayers in the isotropic polar orientational phase is determined using a liner relationship between the monolayer compression speed a and the molecular area Am. Compression speed a was about 30,40,50mm/min. LB layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film.The physicochemical properties of the LB films were examined by UV absorption spectrum, SEM and AFM. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 3~9. Also, we then examined of the MIM device by means of I-V characteristic of the device is measured from -3 to +3[V]. The insulation property of a thin film is better as the distance between electrodes is larger.

• 한국재료학회지
• /
• 제29권1호
• /
• pp.1-6
• /
• 2019

Recent industrialization has led to a high demand for the use of fossil fuels. Therefore, the need for producing hydrogen and its utilization is essential for a sustainable society. For an eco-friendly future technology, photoelectrochemical water splitting using solar energy has proven promising amongst many other candidates. With this technique, semiconductors can be used as photocatalysts to generate electrons by light absorption, resulting in the reduction of hydrogen ions. The photocatalysts must be chemically stable, economically inexpensive and be able to utilize a wide range of light. From this perspective, cuprous oxide($Cu_2O$) is a promising p-type semiconductor because of its appropriate band gap. However, a major hindrance to the use of $Cu_2O$ is its instability at the potential in which hydrogen ion is reduced. In this study, gold is used as a bottom electrode during electrodeposition to obtain a preferential growth along the (111) plane of $Cu_2O$ while imperfections of the $Cu_2O$ thin films are removed. This study investigates the photoelectrochemical properties of $Cu_2O$. However, severe photo-induced corrosion impedes the use of $Cu_2O$ as a photoelectrode. Two candidates, $TiO_2$ and $SnO_2$, are selected for the passivation layer on $Cu_2O$ by by considering the Pourbaix-diagram. $TiO_2$ and $SnO_2$ passivation layers are deposited by atomic layer deposition(ALD) and a sputtering process, respectively. The investigation of the photoelectrochemical properties confirmed that $SnO_2$ is a good passivation layer for $Cu_2O$.

• 공업화학
• /
• 제34권3호
• /
• pp.207-212
• /
• 2023

근적외선 흡수 염료는 전통적으로 정보 기록 및 정보 표시 분야에 사용되었을 뿐만 아니라 최근 광학 필터, 바이오, 에너지 저장 및 변환, 코팅 첨가제 등 다양한 응용 분야에 적용되고 있다. 핸드폰이나 디지털 카메라에 사용되는 이미지 센서는 근적외선 영역에서도 감도를 나타내기 때문에 보다 선명한 이미지를 구현하기 위해 근적외선 광학필터가 필수적이다. 에너지 저장 및 변환이 중요해짐에 따라 투명 태양 전지 분야에서는 근적외선 영역까지 흡수 영역을 확장할 수 있도록 다양한 근적외선 흡수 소재가 개발되고 있으며, 이를 이용해 소자 효율을 향상시키는 연구가 진행되고 있다. 미래 모빌리티 기술로 많은 관심을 받고 있는 자기치유 코팅 시스템에 광-열 효과를 갖는 근적외선 흡수 염료가 도입되어 보다 효율적인 자기치유 성능을 구현하는 연구들도 보고되고 있다. 본 총설에서는 대표적인 근적외선 흡수 염료들의 화학 구조들을 소개하고, 근적외선 흡수 염료들을 기반으로 한 최신 응용 연구 동향에 대해 다뤄보고자 한다.

• 한국염색가공학회지
• /
• 제29권1호
• /
• pp.45-54
• /
• 2017

Ultraviolet radiation have much influenced with a deep wrinkles, roughness, laxity of skin damage and pigmentation through oxidative stress and oxidative photo-damage. This study investigates the functional properties of hydrogel facial mask sheets made from agar, Styela clava tunics and Broussonetia papyrifera tunics. The skin of S. clava is covered with a hard cellulose containing glycoprotein, glycosaminoglycan and chondroitin sulfate. B. papyrifera is better known as Paper mulberry. It contains kazinol which serves as a tyrosinase inhibitor and skin whitening agent. The tensile strength of facial mask sheet was measured by universal testing machine, and the water absorption and moisture permeability of facial mask sheet were measured by dryer. Additionally, the DPPH assay and MTT assay were conducted for anti-oxidative activity and cytotoxicity of facial mask sheet. The whitening effect of the facial mask sheet was measured by tyrosinase inhibitor assay. These tests showed that the three ingredients are suitable cosmetic materials. The results reveal that they produce a high quality hydrogel facial mask sheet when the membrane contains 1%(W/V) of agar, 0.1%(W/V) of B. papyrifera tunics and 0.05%(W/V) of S. clava tunics.

• 한국분말재료학회지
• /
• 제15권1호
• /
• pp.13-17
• /
• 2008

Visible-light responsive $TiO_2$:Zr, N powders were prepared by polymer complex solution method and the particle properties were characterized by using transmission electron microscope, BET method, X-ray diffractometer and UV-Vis spectrophotometer. The photocatalytic reactivity of the catalysts was also estimated by analyzing NO degradation. Polyhedral $TiO_2$ powder having about 20 um in the average particle diameter was successfully prepared, The XRD analysis revealed that the as-prepared powder consisted of anatase and rutile phases. The light absorption of the as-prepared $TiO_2$:Zr, N powder was shifted to the visible light. In addition, the as-prepared $TiO_2$:Zr, N nanoparticles showed the higher photocatalytic activity than the commercial $TiO_2$ under both UV and visible lights.

• 미생물학회지
• /
• 제47권1호
• /
• pp.22-29
• /
• 2011

Chromophore로 레티날(vitamin A)을 사용하는 막 단백질인 로돕신은 7개의 막 단백질로 이루어진다. 최근 광화학/생물리학 측정 방법이 다양해지면서, 그에 따른 새로운 특성도 함께 다양하게 보고되고 있다. 하지만, 다양한 측정 환경에 따른 그 광화학/생물리학 특성의 차이점에 대한 비교연구는 없는 상태이다. 첫째, 빛 에너지를 이용하여 수소 이온 펌프 역할 하는 것으로 잘 알려져 있는 roteorhodopsin (PR)은 해양 proteobacteria에서 발견 되었다. 둘째, 한 오페론에서 14 kDa 전달자와 같이 발현되면서 신호 전달 기능을 하는 Anabaena sensory rhodopsin (ASR)이 있다. 이에 본 연구에서는 이 두 미생물 로돕신을 이용하여 다양한 조건에서 그 차이를 살펴보았다. 각 단백질이 막에 끼어 있는 상태(membrane state), polyacrylamide gel에 고정되어 있는 상태, nonionic detergent일종인 DDM (n-dodecyl-${\beta}$-D-maltopyranoside)과, OG (octyl-${\beta}$-D-glucopyranoside)에 녹아 있는 상태, 좀더 자연상태와 유사한 환경을 위해 단백질만 깨끗하게 정제한 다음 다시 Escherichia coli의 지질인 DOPC (1,2-didecanoyl-sn-glycero-3-phosphocholine)에 재조립한 상태, 이렇게 5가지 조건에서 각각의 광화학/생물리학 특징을 흡수스펙트럼(absorption spectrum), 빛-어둠 차이 흡수스펙트럼(light-induced difference spectrum), 포토사이클(photocycle)을 측정하였다. 그 결과 DDM에 녹아 있는 PR과 ASR에서 각 다른 파장에서 M과 O state와 같은 선명한 photointermediate를 가지고, 가장 signal/noise 비율이 좋았다. 본 연구를 통해 막단백질의 다양한 측정 환경에 대한 그 특성의 차이점을 살펴봄으로써 앞으로 다양한 종류의 로돕신 연구에 기초 기반이 될 것으로 사료된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.189-189
• /
• 2012

Lead sulfide (PbS) nanocrystal quantum dots (NQDs) are promising materials for various optoelectronic devices, especially solar cells, because of their tunability of the optical band-gap controlled by adjusting the diameter of NQDs. PbS is a IV-VI semiconductor enabling infrared-absorption and it can be synthesized using solution process methods. A wide choice of the diameter of PbS NQDs is also a benefit to achieve the quantum confinement regime due to its large Bohr exciton radius (20 nm). To exploit these desirable properties, many research groups have intensively studied to apply for the photovoltaic devices. There are several essential requirements to fabricate the efficient NQDs-based solar cell. First of all, highly confined PbS QDs should be synthesized resulting in a narrow peak with a small full width-half maximum value at the first exciton transition observed in UV-Vis absorbance and photoluminescence spectra. In other words, the size-uniformity of NQDs ought to secure under 5%. Second, PbS NQDs should be assembled carefully in order to enhance the electronic coupling between adjacent NQDs by controlling the inter-QDs distance. Finally, appropriate structure for the photovoltaic device is the key issue to extract the photo-generated carriers from light-absorbing layer in solar cell. In this step, workfunction and Fermi energy difference could be precisely considered for Schottky and hetero junction device, respectively. In this presentation, we introduce the strategy to obtain high performance solar cell fabricated using PbS NQDs below the size of the Bohr radius. The PbS NQDs with various diameters were synthesized using methods established by Hines with a few modifications. PbS NQDs solids were assembled using layer-by-layer spin-coating method. Subsequent ligand-exchange was carried out using 1,2-ethanedithiol (EDT) to reduce inter-NQDs distance. Finally, Schottky junction solar cells were fabricated on ITO-coated glass and 150 nm-thick Al was deposited on the top of PbS NQDs solids as a top electrode using thermal evaporation technique. To evaluate the solar cell performance, current-voltage (I-V) measurement were performed under AM 1.5G solar spectrum at 1 sun intensity. As a result, we could achieve the power conversion efficiency of 3.33% at Schottky junction solar cell. This result indicates that high performance solar cell is successfully fabricated by optimizing the all steps as mentioned above in this work.