• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.19-23
• /
• 2012

This paper presents a practical methodology for realistic simulation on reverse characteristics of Wide Bandgap (WBG) SiC and GaN p-n junctions. The adjustment on certain physic-based model parameters, such as the trap density and photo-generation for SiC junction, and impact ionization coefficients and critical field for GaN junction are described. The adjusted parameters were used in Synopsys Medici simulation to obtain a realistic p-n junction avalanche breakdown voltage. The simulation results were verified through benchmarking against independent data reported by others.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1415-1418
• /
• 1997

An accurate length measuring system has been develope by a modified Michelson interferometer. A frequency stabilized laser source and a 20 fold frequency interpolation and digitizing circuit were applied to the system. Resolutioin of .lambda./40, 16 nm, was achieved from the discrete length measuring system. In order to obtain a resoltuion of 1.mu.m a decimalizing module was designed for the 0.016.mu.m resolution system. The refractive index of the ambient air was calibrated on the decimalizing module through the Edlen's formula. Performance of the system was evaluated on the machining center in short and long length measruements.

• Journal of the Korean Chemical Society
• /
• v.49 no.2
• /
• pp.138-144
• /
• 2005

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.582-584
• /
• 2004

The light-emitting properties of poly(2-triethylgermyl-1,4-phenylenevinylene) (TEG-PPV) are compared with those of the silyl-substituted PPV homologue, poly(2-trimethylsilyl-1,4phenylenevinylene) (TMS-PPV). The precursor polymer is solution-processable. After carrying out thermal elimination on the precursor polymer film, the resulting fully conjugated polymer film was found to exhibit high thermal stability in air, and absorption that is shifted to the longer wavelength region owing to the extension of the n-conjugated system. TEG-PPV exhibits efficient green light emission; the maximum PL emission of a TEG-PPV thin film was found to be at 515 nm. The HOMO and LUMO energy levels were also determined using photo-emission spectroscopy. The performance of the TEG-PPV EL device was found to be comparable to that of the TMS-PPV device.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.10
• /
• pp.894-900
• /
• 2006

This paper reports the fabrication and characterization of $32{\times}32$ thermal cantilever array for nano-scaled memory device applications. The $32{\times}32$ thermal cantilever array with integrated tip heater has been fabricated with micro-electro-mechanical systems(MEMS) technology on silicon on insulator(SOI) wafer using 9 photo masking steps. All of single-level cantilevers(1,024 bits) have a p-n junction diode in order to eliminate any electrical cross-talk between adjacent cantilevers. Nonlinear electrical characteristic of fabricated thermal cantilever shows its own thermal heating mechanism. In addition, n-channel high-voltage MOSFET device is integrated on a wafer for embedding driver circuitry.

• 전기의세계
• /
• v.34 no.9
• /
• pp.548-552
• /
• 1985

서울대학교 병원에서는 약2년간의 이분야에 대한 기초 및 임상연구 결과를 토대로 하여 D.S.R.System을 개발하고 있다. 현재 개발하고 있는 Systme은 다음과 같다. 1) X선 발생장치 및 Control부분 2) 산란효과 제거를 위한 fore-slit 및 after-slit과 구동장치 3) X선을 광신호로 변환하기 위한 rare earth screen과 광신호를 전기적인 신호로 변환시키기 위한 photo-diode array detector의 결합체, 4) data 수집부분, 증폭장치와 A/D변환기, 고속 data 저장용 기억장치 부분 5) data 처리와 display를 위한 Bit-slice processor 5) Picture Archiving and Communication Systems (PACS) 이러한 부분 이외에 SNR을 향상시키고 좁은 부위의 region of interest를 보다 정확하게 관찰하기 위해서 511p/mm의 고밀도 선형검출기를 병행으로 사용하고 있다. 이 선형검출기를 이용하여 일부의 영상을 관찰하여 그 결과를 Wiener filter 등의 방법의 매개변수 선정에 이용하여 전체적인 영상의 질을 향상시키고자 하는 것이다.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.36-38
• /
• 2001

A basic structure of 2500V-4500V reverse-conducting GCT (RC-GCT) is given in this paper. The punch-through type (PT) is adopted for narrow N-base with high resistivity so that the fast turn-off and low on-state voltage can be achieved. The photo mask design was made upon the both turn-off performance and solution of separation between GCT and integrated freewheeling diode (FWD) part. The turn-on and turn-off characteristics for reserve-conducting gate commutated thyristors (RC-GCTs) were investigated by ISE simulation. Additionally, the local carrier lifetime control by proton irradiation was adopted so as not only to obtain the reduction of turn-off losses of GCT but also to reach a soft reverse recovering characteristics of FWD

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.2
• /
• pp.338-344
• /
• 2001

According to the MARPOL 73/78 of Convention, all ships should have oil filtering equipment and 15 ppm bilge which satisfy Requirements of MARPOL 73/78. This study is concerned with designing and manufacturing a prototype Oil content Meter(OCM) used in machinery area of ship. The prototype OCM is composed of two parts which are oil content sensing module and data processing unit. The oil content sensing module consists of infra-red light source, photo-diode light receivers, and a glass tube for bilge water sample. The data processing unit has a micro-processor as hard core and peripheral devices. The experimental results of prototype OCM and analysis of collected data reveal linear property between transmitted light and scattered light as long as the bilge water has low level content of oil. And this linear property leads to a oil content detecting method which is programmed and loaded into the data processing unit. The performance of the prototype OCM is compared with that of the commercial OCM in the market.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.2
• /
• pp.311-320
• /
• 2001

Since 1998 for protection of marine pollution, all ships must have oil filtering equipment and 15ppm bilge alarms which satisfy Requirements of MARPOL 73/78. Oily-water separator used in machinery area of ships usually consists of two parts; one is filtering equipment and the other is oil content meter(OCM). This study presents optical characteristics of bilge were acquired form oil content sensing module. The oil content sensing module consists of IR-LED light source, photo-diode light receivers, and a glass tube for bilge water sample. The experiment with the bilge water demonstrates various valuable optical properties. These optical properties suggest notes and guides to make the low-cost, easy operation and good performance commercial type OCM that satisfy the requirements of MARPOL 73/78.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.154-157
• /
• 2002

A cyto-indentation technique was used to obtain the biomechanical compressive compliance property of an chondrocyte cell attached to glass surface, which was tried to generate joint cartilage by tissue engineering. Piezo-transducer system and dual photo-diode system were used to conduct mechanical indentation through displacement-controlled testing and the measurement of corresponding cell reaction force. The Poisson's ratio of 0.37 was quoted from other report. The compressive compliance of chondrocyte, that was determined by elastic contact theory, was 1.38${\pm}$0.057 kPa. This value is 30% higher than that of MG63 osteoblast-like cell. The cyto-indentation technique employed in this study is so precise that it can quantify the biomechanical property of single cell.