• Korean Journal of Environmental Agriculture
• /
• v.29 no.1
• /
• pp.54-60
• /
• 2010

We have researched the changes in nutrient content in each phase of fermentation in crops treated with liquefied pig fertilizer, and have determined the best method for applying livestock excrement to cultured crops. In the execution of this experiment, rice was cultivated to full maturity at a paddy field in Jeollabuk-Do Agriculture Research and Extension Services(Jeon-buk series) from 2007 to 2008. The rice plant nitrogen absorption quantity change, according to the growth stages of the cultivated rice, was 20.3% in the rice treated with the liquid pig manure and 22.2% the chemical fertilizer at highest congelation. The chemical fertilizer showed a higher absorption quantity than the liquid manure compost. The nitrogen density at highest congelation was 1.5% in the chemical fertilizer, and 1.8% in the pig manure liquid compost not a significant difference. The stem height at harvest time was 73.8 cm in the crops treated with the liquid pig manure compost. Those treated with the chemical fertilizer, yielded a height of 4.2 cm less than the crops treated with the liquid pig manure compost. The yield was 507 kg/10a in the liquid pig manure compost treated rice, compared with the chemical fertilizer, which showed a value of 1.2% lower. The protein content was 6.3% in the rice treated with the chemical fertilizer, but 6.4% in the rice treated with the liquid pig manure compost. This is not a significant difference. However, the lodging rice plant treated with the chemical fertilizer control showed a protein content of 6.8%, which was even higher than the normal rice. The head rice ratio in the brown rice and the polished rice ended up to be lower in the crop treated with the liquid pig manure than that treated with the chemical fertilizer, Quality, the palatability value, was similar in both groups. The above result indicate that, the effect of liquid pig manure compost corresponds to the effect of chemical fertilizer, when each are scattered uniformly.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.89-114
• /
• 2012

For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.

• The Korean Journal of Pesticide Science
• /
• v.14 no.2
• /
• pp.95-103
• /
• 2010

Fomesafen is a selective herbicide, and used to control annual and perennial broad-leaf grass on soybean and fruit fields in USA and China, but not introduced in Korea yet. So, MRL (Maximum Residue Level), and analytical method of fomesafen were not establishment in Korea. Therefore, this experiment was conducted to establish a determination method for fomesafen residue in crops using HPLC-UVD/MS. Fomesafen residue was extracted with acetone from representative samples of five raw products which comprised hulled rice, soybean, apple, green pepper, and Chinese cabbage. The extract was diluted with saline water, and dichloromethane partition was followed to recover fomesafen from the aqueous phase. Florisil column chromatography was additionally employed for final clean up of the extract. The fomesafen was quantitated by HPLC with UVD, using a Shiseido CAPCELL-PAK UG C18 column. The crops were fortified with fomesafen at 3 levels per crop. Mean recovery ratio were ranged from 87.5% for a 0.4 ppm in hulled rice to 102.5% for a 0.4 ppm in apple. The coefficients of variation were ranged from 0.6% for a 2.0 ppm in hulled rice to 7.7% for a 0.04 ppm in green pepper. Quantitative limit of fomesafen was 0.04 mg/kg in representative 5 crop samples. A LC/MS with selected-ion monitoring was also provided to confirm the suspected residue. Therefore, this analytical method was reproducible and sensitive enough to determine the residue of fomesafen in agricultural commodities.

• Journal of Food Hygiene and Safety
• /
• v.23 no.2
• /
• pp.113-120
• /
• 2008

The influence of incubation temperature, pH and media components on bacteriocin production by Lactobacillus plantarum K11 were investigated. The highest activity was observed in MRS broth, but no bacteriocin activity was obtained in TSB. The bacteriocin was produced from the exponential growth phase and its activity also reached a maximum in MRS broth, but then dropped after 16 hr because of degradation by extracellular proteolytic enzymes or exhaustion of medium nutrients. The optimal temperature and pH for production of bacteriocin were $37^{\circ}C$ and pH 7.0 in MRS broth, respectively. The addition of 0.5 or 1.0% glucose and $0.5{\sim}1.5%$ lactose to MRS resulted in the increase of the bacteriocin production. With 0.5% NaCl and $K_2HPO_4$, the activities were significantly higher than that of control, respectively. However, increasing nitrogen sources such as beef extract, casein, and tryptone and salts such as $NH_4PO_4$, $MgSO_47H_2O$, and $MnSO_4H_2O$, had detected a negative influence upon the bacteriocin production. Consequently, because the bacteriocin produced by L. plantarum K11 was affected by various incubation conditions, the bacteriocin activity of L. plantarum K11 applied in food as a novel starter will be dependent on environmental factors such as fermentation conditions and food ingredients.

• The Korean Journal of Pharmacology
• /
• v.26 no.2
• /
• pp.177-183
• /
• 1990

This study was undertaken to confirm whether or not the sympathetic nervous system takes part in the liver regeneration after partial hepatectomy. The male Sprague-Dawley rats were pretreated with I.P. injection of guanethidine 25 mg/kg: single dose (G-1); multiple doses once a day for 3 days (G-3), for 5 days (G-5), or for 6 days (G-6). The rats were subjected to partial hepatectomy $(70.4{\pm}1.99%)$ under light anesthesia of diethyl ether. 1) The systolic blood pressure of control rat was $98.0{\pm}3.9\;mmHg$ and was not affected by G-1. But after the pretreatment with G-3, G-5 or G-6, the pressure was markedly decreased by over 25 %. 2) Both of plasma norepinephrine and epinephrine levels showed the marked increases 3 hrs after the hepatectomy. However, the increases are entirely inhibited by G-1 or G-6. 3) All the liver contents of putrescine, spermidine and spermine showed the significant increases 6 hrs after the hepatectomy and were not affected by G-1 or G-6 with the exception of the inhibition of putrescine increase by only G-6. The present results suggest that the sympathetic activation appeared after partial hepatectomy seems not to play an important role in rat liver regeneration.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.253-263
• /
• 2013

Frequency Scanning Interferometry(FSI) system, one of the most promising optical surface measurement techniques, generally results in superior optical performance comparing with other 3-dimensional measuring methods as its hardware structure is fixed in operation and only the light frequency is scanned in a specific spectral band without vertical scanning of the target surface or the objective lens. FSI system collects a set of images of interference fringe by changing the frequency of light source. After that, it transforms intensity data of acquired image into frequency information, and calculates the height profile of target objects with the help of frequency analysis based on Fast Fourier Transform(FFT). However, it still suffers from optical noise on target surfaces and relatively long processing time due to the number of images acquired in frequency scanning phase. 1) a Polarization-based Frequency Scanning Interferometry(PFSI) is proposed for optical noise robustness. It consists of tunable laser for light source, ${\lambda}/4$ plate in front of reference mirror, ${\lambda}/4$ plate in front of target object, polarizing beam splitter, polarizer in front of image sensor, polarizer in front of the fiber coupled light source, ${\lambda}/2$ plate between PBS and polarizer of the light source. Using the proposed system, we can solve the problem of fringe image with low contrast by using polarization technique. Also, we can control light distribution of object beam and reference beam. 2) the signal processing acceleration method is proposed for PFSI, based on parallel processing architecture, which consists of parallel processing hardware and software such as Graphic Processing Unit(GPU) and Compute Unified Device Architecture(CUDA). As a result, the processing time reaches into tact time level of real-time processing. Finally, the proposed system is evaluated in terms of accuracy and processing speed through a series of experiment and the obtained results show the effectiveness of the proposed system and method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.9
• /
• pp.1328-1334
• /
• 2010

Low-trans spread fat (LTSF) was produced by lipase-catalyzed synthesis of canola (CO) and fully hydrogenated soybean oil (FHSBO) at 65:35 (w/w). Blend of CO and FHSBO with 65:35 ratio was interesterified using Lipozyme TLIM (immobilized Thermomyces lanuginosus, 20% of total substrate) in a 1 L-batch type reactor at $70^{\circ}C$ with 500 rpm for 24 hr. Then, physicochemical melting properties of LTSF were compared with commercial spread fat. At $20^{\circ}C$, solid fat contents (SFC) of commercial spread fat as a control and LTSF were similar, showing 19.1 and 18.1%, respectively. Major compositional fatty acids of LTSF were C18:0, C18:1 and C18:2 (29.2, 41.8 and 13.3 wt%, respectively). Trans fatty acid content of the LTSF (0.2 wt%) was lower than that of commercial spread fat (5.5 wt%). In the RP-HPLC analysis from LTSF, major triacylglycerol (TAG) molecules were SOL (stearoyl-oleoyl-linoleyl), SOO, POS/PSP, and SOS. Also, polymorphic form and x-ray diffraction of LTSF showed coexistence of $\beta$' and $\beta$ form crystals.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.388-394
• /
• 2014

BACKGROUND: Aclonifen is used as a systemic and selective herbicide to control a wide spectrum broad-leaf weeds by inhibition carotenoid biosynthesis, and then its MRLs(Maximum Residue Limits) will be determined in onion and garlic. In this study, a new official method was developed for aclonifen determination in agricultural products to routinely inspect the violation of MRL as well as to evaluate the terminal residue level. METHODS AND RESULTS: Aclonifen was extracted from crop samples with acetone and the extract was partitioned with dichloromethane and then purified by silica solid phase extraction(SPE) cartridge. The purified samples were detected GC using an ECD detector. Limits of detection(LOD) was 0.001 mg/kg and quantification(LOQ) was 0.005 mg/kg, respectively. For validation purposes, recovery studies were carried out at three different concentration levels (LOQ, $10{\times}LOQ$, $50{\times}LOQ$, n=5). The recoveries were ranged from 74.3 to 95.0% with relative standard deviations(RSDs) of less than 8%. All values were consistent with the criteria ranges requested in the Codex guidelines(CAC/GL 40). CONCLUSION: The proposed analytical method was accurate, effective and sensitive for aclonifen determination and it will be used to as an official method in Korea.

• Korean journal of food and cookery science
• /
• v.13 no.4
• /
• pp.440-447
• /
• 1997

The antibacterial effect of low concentrations of oregano (Origanum vulgare L.) in culture broth against Escherichia coli O157:H7 and Staphylococcus aureus 196E was tested at 35,5 and -20$^{\circ}C$. Tryptic soy broth (TSB) containing 0∼2% (w/v) of oregano was inoculated with 10$\^$6/∼10$\^$7/ CFU/$m\ell$ of E. coli or S. aureus and incubated at each temperature. The growth of E. coli was not inhibited at 0.1∼1.0% oregano and the growth occured at 2% oregano but only after a prolonged lag period. The death rate of E. coli after stationary phase was increased with increasing concentration of oregano in culture broth. The growth of S. aureus was inhibited with increasing concentration of oregano at 35$^{\circ}C$. Growth of S. aureus occured at the presence of 0.3∼0.5% oregano after a long lag period while the viability at 1.0∼2.0% was decreased during storage at 35$^{\circ}C$. During refrigerated storage at 5$^{\circ}C$, inhibition of E. coli or S. aureus was increased with the progress of time and increasing spice concentration. At the presence of 0.5∼2.0% oregano, E. coli and S. aureus were dead after 20 and 16 days of refrigerated storage, respectively. During frozen storage at -20$^{\circ}C$, the antibacterial activity of oregano against E. coli was increased with increasing storage time and spice concentration while the antibacterial activity against S. aureus was effective during the early period of storage, and no changes in the population of S. aureus occurred at different concentrations of oregano during frozen storage. Viable counts of E. coli were 1/3∼l/7 and S. aureus were 1/18∼l/46 of the control at 0.1% oregano in culture broth during frozen storage.

• Radiation Oncology Journal
• /
• v.24 no.4
• /
• pp.263-271
• /
• 2006

$\underline{Purpose}$: To evaluate the effectiveness and safety of fentanyl-TTS in the management of radiotherapy induced acute pain and cancer pain treated with radiotherapy. $\underline{Materials\;and\;Methods}$: Our study was open labelled prospective phase IV multi-center study. the study population included patients with more 4 numeric rating scale(NRS) score pain although managed with other analgesics or more than 6 NRS score pain without analgesics. Patients divided into two groups; patients with radiotherapy induced pain (Group A) and patients with cancer pain treated with radiotherapy (Group B). All patients received 25 ug/hr of fentanyl transdermal patch. Primary end point was pain relief; second end points were change in patient quality of life, a degree of satisfaction for patients and clinician, side effects. $\underline{Results}$: Between March 2005 and June 2005, 312 patients from 26 participating institutes were registered, but 249 patients completed this study. Total number of patients in each group was 185 in Group A, 64 in Group B. Mean age was 60 years and male to female ratio was 76:24. Severe pain NRS score at 2 weeks after the application of fentanyl was decreased from 7.03 to 4.01, p=0.003. There was a significant improvement in insomnia, social functioning, and quality of life. A degree of satisfaction for patients and clinician was very high. The most common reasons of patients' satisfactions was good pain control. Ninety six patients reported side effect. Nausea was the most common side effect. There was no serious side effect. $\underline{Conclusion}$: Fentanyl-TTS was effective in both relieving pain with good tolerability and improving the quality of life for patients with radiotherapy induced acute pain and cancer pain treated with radiotherapy. The satisfaction of the patients and doctors was good. There was no major side effect.