• 천문학회보
• /
• 제36권2호
• /
• pp.117.1-117.1
• /
• 2011

We present the smoothness of mid-infrared sky brightness from the Japanese infrared astronomical satellite, AKARI observations. AKARI monitored the north ecliptic pole (NEP) during its cold phase with nine wavebands from 2.4 to 24 ${\mu}m$, out of which six mid-infrared bands are used in this study. Simple sinusoidal fit to the seasonal variation of the sky brightness shows that the mid-infrared brightness towards the NEP is not affected by small-scale features of the interplanetary dust cloud. We applied the power spectrum analysis to the images to search for the fluctuation of sky brightness. The fluctuation powers at 200 arcsecond are estimated to be at most $1.58{\pm}0.33\;nW\;m^{-2}sr^{-1}$ or 0.13% of the total brightness at $7{\mu}m$ and a tleast $0.64{\pm}0.11\;nW\;m^{-2}sr^{-1}$ or 0.02% at $18{\mu}m$. The residual fluctuations at a few arcminute scales at short mid-infrared wavelengths (7, 9, and 11 ${\mu}m$) are consistent with those expected from the diffuse galactic light. At long mid-infrared wavelengths (15, 18, and 24 ${\mu}m$) the measured fluctuations are comparable to or smaller than the one caused by photon noise and their sources are not identified. We conclude that the upper limit of the fluctuation in the zodiacal light is about 0.02% of the sky brightness.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.334-337
• /
• 2002

In this study, the microstructure, dielectric and piezoelectric properties of $0.15Pb(Ni_{1/3}Nb_{2/3})O_3-0.85(PbZr_{0.5}Ti_{0.5})O_3$(0.15PNN-0.85PZT) ceramics having compositions near the morphotropic phase boundary(MPB) was investigated with respect to the variation of $Y_2O_3$ and $Ga_2O_3$ addition amount. The dielectric properties increased and piezoelectric properties decreased with increasing the amount of $Ga_2O_3$. The solubility limit of $Y_2O_3$ is 0.5mol% in this system. The electro-mechanical coupling factor$(K_p)$ and dielectric constant(${\varepsilon}_r$) were 58.6% and 1755 when the amount of $Y_2O_3$ are 0.5mol%.

• 대한화학회지
• /
• 제8권4호
• /
• pp.147-152
• /
• 1964

有機溶媒(benzene)에 의한 抽出法을 利用하고, 分光光度法에 의한 몰比法과 連續變化法을 써서, V(IV)-cupferrate와 V(V)-cupferrate의 化學沮成이 水溶液相에서 有機溶媒相으로 分配된 다음에도 雙하지 않을 것이라는 假定밑에서, 水溶液의 酸性度에 따르는 cupferrate 錯化合物의 化學組成을 決定하였다. V(IV)-cupferrate의 benzene 溶液에서의 最大吸光波長은 pH에 따라 445$m{\mu}$ 또는 450$m{\mu}$이고, V(V)-cupferrate의 그것은 pH 1.8以下에서는 pH에 無關하게 445$m{\mu}$이었다. V(V)-cupferrate의 化學組成은 沈澱이 形成되는 水溶液의 pH에 따라 다르며, pH 1.0 以下에서는 $VCupf_4$, pH 1.3∼1.7에서는 $HVOCupf_3$ 또는 $VCupf_4$와 $VOCupf_2$의 거의 같은 몰씩으로된 混合物이고, pH 1.8∼4.3에서는 $VOCupf_2$이었다. V(V)-cupferrate의 化學組成은 水溶液의 pH에 따라 變化가 없고, pH 1.8 以下에서는 $HVO_2Cupf_2$이었다.

• 한국패류학회지
• /
• 제20권1호
• /
• pp.65-73
• /
• 2004

Gametogenesis, changes of gonad bulk index (GBI), monthly variation in oocyte diameter, reproductive cycle and spawning with lunar cycle of the top shell, Trochus niloticus were investigated by histological examination. The specimens were sampled in the coastal waters of Chuuk Island, Micronesia, form November 1999 to September 2000. T. niloticus is a gonochorism, and the female and male were present in an approximately 1:1 ratio (p > 0.05). The ovary contained with the oocyte of yolk stage, the testis composed of the spermatid and spermatozoa at around the year. Monthly GBI were higher at February, March, April and June than the other months. Major spawning occurred between April and May, and June and July but the individuals of partially spawning were presented throughout the year. GBI with lunar cycle were higher at the full moon than the other lunar phase. These results suggest that the spawning occurred between the full moon and last quarter moon.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.23-29
• /
• 2020

Electrochromic (EC) device is an element whose transmittance is changed by electrical energy. Coloring and decoloring states can be easily controlled and thus used in buildings and automobiles for energy saving. There exist several types of EC devices; EC using electrolytes, polymer dispersed liquid crystal (PDLC), and suspended particle device (SPD) using polarized molecules. However, these devices involve solutions such as electrolytes and liquid crystals, limiting their applications in high temperature environments. In this study, we have studied all-solid-state EC device based on Tin(IV) oxide (SnO₂). A coloring phase is achieved when electrons are accumulated in the ultraviolet (UV)-treated SnO₂ layer, whereas a decoloring mode is obtained when electrons are empty there. The UV treatment of SnO₂ layer brings in a number of localized states in the bandgap, which traps electrons near the conduction band. The SnO₂-based EC device shows a transmittance of 70.7% in the decoloring mode and 41% in the coloring mode at a voltage of 2.5 V. We have achieved a transmittance change as large as 29.7% at the wavelength of 550 nm. It also exhibits fast and stable driving characteristics, which have been demonstrated by the cyclic experiments of coloration and decoloration. It has also showed the memory effects induced by the insulating layer of titanium dioxide (TiO₂) and silicone (Si).

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.6-16
• /
• 1998

Ceramides are currently emerging as the major skin care ingredients due to !heir barrier properties in the stratum corneum of the human skin. Thus, major cosmetic companies have developed synthetic ceramide analogs for their own use. In this study, several ceramide mimic compounds , new skin barrier lipids, were designed and synthesized, and their physical and biological properties were investigated to evaluate their skin care capability. Several structures were designed from the variation of hydrophobic alkyl chain and hydrophilic moiety by the use of molecular modeling software. The selected targets were synthesized, and their properties and activities were studied as the pure form, in the emulsion, or in the lamellar mixture containing cholesterol and fatty acid. Some compounds, such as 1,3-bis(N-(2-hydroxyethyl)-palmitoylamino)-2-hydroxypropane, enhanced the restoration of skin barrier damaged by SDS(sodium dodecyl sulfate), and by acetone treatment. The rate of restoration was comparable to that of natural ceramides. The synthesized compounds alleviated SDS induced skin irritation and facilitated lamellar phase liquid crystal formation. The treatment of 1,3-Dis(N-(2-hydroxyethyl)-palmitoylam ino)-2-hyd roxypropane on the acetone damaged skin revealed that the compound promoted the recovery of intercellular lipid lamellar structure of stratum corneum layer. The replacement of palmitoyl groups of the compound with shorter alkyl chain gave lower emulsion viscosity and liquid crystal density, suggesting easier formulation and poorer barrier activity. Most of the synthesized compounds were non-irritable in various toxicological tests proving that they can be safely introduced to the skin care formulations.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.446-446
• /
• 2011

One dimensional (1-D) structures of ZnO nanorods are promising elements for future optoelectronic devices. However there are still many obstacles in fabricating high-quality p-type ZnO up to now. In addition, it is limited to measure the degree of the doping concentration and carrier transport of the doped 1-D ZnO with conventional methods such as Hall measurement. Here we demonstrate the measurement of the electronic properties of p- and n-doped ZnO nanorods by the Kelvin probe force microscopy (KPFM). Vertically aligned ZnO nanorods with intrinsic n-doped, As-doped p-type, and p-n junction were grown by vapor phase epitaxy (VPE). Individual nanowires were then transferred onto Au films deposited on Si substrates. The morphology and surface potentials were measured simultaneously by the KPFM. The work function of the individual nanorods was estimated by comparing with that of gold film as a reference, and the doping concentration of each ZnO nanorods was deduced. Our KPFM results show that the average work function difference between the p-type and n-type regions of p-n junction ZnO nanorod is about ~85meV. This value is in good agreement with the difference in the work function between As-doped p- and n-type ZnO nanorods (96meV) measured with the same conditions. This value is smaller than the expected values estimated from the energy band diagram. However it is explained in terms of surface state and surface band bending.

• 대한화학회지
• /
• 제37권12호
• /
• pp.1025-1034
• /
• 1993

정상 액체 크로마토그래피에 사용되는 2-propanol / hexane 혼합용매계와 ethyl acetate / hexane 혼합용매계에 대하여 전 용매조성에 대한 극성도 지수 ${\pi}^*$, $\alpha$ , $\beta$값을 측정하였다. 이 중 hexane/ethyl acetate계는 전 조성에 대하여 $\alpha$ 가 0으로 정의되므로 ${\pi}^*$와 $\beta$값만을 측정하였다. 기존의 문헌치 ${\pi}^*$, $\alpha$ , $\beta$와 일관성이 있는 극성도 지수를 구하기 위하여 본 연구의 실측치와 문헌치간에 좋은 직선상관성을 가정하여 보정하였으며 최종 보정된 혼합용매 극성도 지수의 용매 조성에 따른 변화는 각 용매성분의 화학적 성질에서 예측할 수 있는 경향에 부합하는 결과를 보였다. 이들 두 용매계에 대하여 관찰된 일반적인 경향은 다음과 같다. 극성도 대 조성배의 그래프에서 ${\pi}^*$값은 더 극성인 용매의 조성비가 증가할수록 증가하는 경향을 보이고, $\alpha$ 와 $\beta$ 값은 더 극성인 용매의 조성비가 0일 때 최소값을 갖고 조성비의 증가에 따라 극대치를 이룬 다음 다시 감소하는 특이한 경향을 보였다.

• 한국재료학회지
• /
• 제12권3호
• /
• pp.211-214
• /
• 2002

Properties of 52/48 PZT films with various thicknesses for piezoelectric micro-electro mechanical systems (MEMS) devices fabricated by multi-coating method on $Pt(3500{\AA})/Ti(400{\AA})/SiO_2(3000{\AA})/Si$(525$\mu\textrm{m}$) substrates were investigated. PZT films were deposited by spin-coating process at 3500 rpm for 30 sec, followed by pyrolysis at 45$0^{\circ}C$ for 10 min producing the thickness of about 120nm. These processes were repeated 4, 8, 12, 16 and 20 times in order to have various thicknesses, respectively. Finally, they were crystallized at $650^{\circ}C$ for 30 min. All thick PZT films showed dense and homogeneous surface microstructures. Thick PZT films showed crystalline structures of random orientations with increasing thickness. Dielectric constants of thick PZT films were increased with increasing film thickness and reached 800 at 100kHz for 2.3$\mu\textrm{m}$ thick PZT film. $P_r\; and\; E_c$ of 2.3$\mu\textrm{m}$ thick PZT films were about 20$\mu$C/$\textrm{cm}^2$ and 63kV/cm. Depth profile analysis by Auger Electron Spectroscopy (AES) of 4800 $\AA$ thick PZT film showed the formation of the perovskite phase on Pt layer by Pb diffusion behavior. It was considered that Pb-Pt intermediate layer promoted PZT (111) columnar structures.

• 한국재료학회지
• /
• 제23권1호
• /
• pp.7-12
• /
• 2013

The $Cu_2ZnSnS_4$ (CZTS) thin film solar cell is a candidate next generation thin film solar cell. For the application of an absorption layer in solar cells, CZTS thin films were deposited by pulsed laser deposition (PLD) at substrate temperature of $300^{\circ}C$ without post annealing process. Deposition time was carefully adjusted as the main experimental variable. Regardless of deposition time, single phase CZTS thin films are obtained with no existence of secondary phases. Irregularly-shaped grains are densely formed on the surface of CZTS thin films. With increasing deposition time, the grain size increases and the thickness of the CZTS thin films increases from 0.16 to $1{\mu}m$. The variation of the surface morphology and thickness of the CZTS thin films depends on the deposition time. The stoichiometry of all CZTS thin films shows a Cu-rich and S-poor state. Sn content gradually increases as deposition time increases. Secondary ion mass spectrometry was carried out to evaluate the elemental depth distribution in CZTS thin films. The optimal deposition time to grow CZTS thin films is 150 min. In this study, we show the effect of deposition time on the structural properties of CZTS thin film deposited on soda lime glass (SLG) substrate using PLD. We present a comprehensive evaluation of CZTS thin films.