• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3632-3637
• /
• 2009

본 논문에서는 단상 MJ81 전기선로전환기의 실용화를 위해 요구되는 현장설치시험을 수행한 결과를 기술하고 있다. 이러한 단상 MJ81 전기선로전환기는 경부고속철도 건설시에 프랑스 알스톰 및 코지프로부터 기술이전 받아 국산화한 3상 MJ81 전기선로전환기를 단상 220V를 사용하고 있는 국내 기존선에서도 선로 연변 전원설비의 변경 없이도 사용할 수 있도록 구동부의 성능 개선을 통해 공인인증시험을 통과한 제품이다. 한국철도기술연구원 및 삼성 SDS에서는 기존철도기술개발사업을 통해 기존선의 속도 및 안전성 향상을 위해 단상 MJ81 전기선로전환기를 국산화 하였으나 이의 실용화를 위해서는 연동장치와의 인터페이스 시험 뿐 아니라 실제 선로에서의 현장설치시험을 통해 성능을 입증하여야 한다. 본 논문에서는 이러한 시험을 진행한 과정과 함께 현장설치시험의 결과 분석을 통해 국산품인 단상 MJ81 전기선로전환기의 실용성을 입증하였으며, 입증된 결과를 바탕으로 2009년 2월 한국철도시설공단의 물량을 수주하여 현재 설치 중이다.

• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.265-270
• /
• 2022

본 논문에서는 정지 좌표계 dq-축 전류를 기반으로 하는 비대칭 6상 PMSM의 스위치 개방 고장 검출 알고리즘을 제안한다. 본 논문에서의 해당 모터는 2개의 3상 권선이 30°의 전기적 위상차를 갖고 중성점이 분리된 비대칭 구조를 갖는다. 따라서 듀얼 3상 PWM 인버터와 스위치 개방 고장으로 인한 검출기법이 반드시 필요하다. 본 논문에서는 비대칭 6상 PMSM을 구동하기 위해 듀얼 dq축 전류 제어 방식을 사용하며 전역 통과 필터와 저역 통과 필터를 사용해 전류 변동을 감지하여 개방 고장이 발생한 스위치를 검출하는 방식을 제안한다. 제안한 방법의 효과와 유용성은 여러 실험을 통해 검증하였다.

• 전기학회논문지
• /
• 제65권2호
• /
• pp.304-310
• /
• 2016

This paper proposes a fault diagnosis method for an open-fault in inverter driving five-phase induction motor. The five-phase induction motor has a high output torque and small torque ripple in comparison to three-phase. The best advantage of the five-phase induction motor is fault diagnosis and tolerant control using redundancy of phases. This paper uses an inverter as a power converter for driving a five-phase induction motor. If a switch of inverter occurs to the open-fault, this problem is the influence on the output current and output torque. To solve this problem, there is need of an accurate diagnosis and fault switch distinction. Therefore, this paper propose a fault detection method of the open-fault switches for the fault diagnosis. First, analyzing the pattern for the open-circuit fault of one phase. next, analyzing the pattern for the open-circuit fault of each inverter switches. Through the pattern analysis, It defines the scope of each of the failure switch. Thereafter, By using an algorithm that proposes to perform a fault diagnosis method. The proposed algorithm is verified from the experiment with the 1.5 kW five-phase induction motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.284-286
• /
• 1995

The most common for starting a single phase induction motor is to install a starting condenser and a centrifugal switch in series with the auxiliary winding. Though this method is simple, life of single phase induction motor is short because of malfunction of a starting condenser and a centrifugal switch and efficiency improvement has limitation. In this paper, the starting characteristics of SPIM is improved by voltage and phase control strategy of auxiliary winding in removing a starting condenser and a centrifugal switch. Finally, the excellent starting performance of SPIM is shown through simulation and experimental results.

• 조명전기설비학회논문지
• /
• 제28권8호
• /
• pp.82-89
• /
• 2014

The industrial products to use single phase inverter are raised the necessity of power quality improvement, such as AC Motor Driver, Lighting, Renewable energy power converter. Also, it is increasing that applied the single phase multilevel inverter for high quality power at renewable energy power converter. Especially, the photovoltaic multilevel inverters have at least more than two DC_Link and more than one DC/DC Converter. This paper proposes a triple output DC/DC Converter with one switch for photovoltaic multilevel inverter. The proposed converter has advantages of low cost and volume because it has one switch. The operation principle of the converter is analyzed and verified. A prototype is implemented to verify of the proposed converter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.205-208
• /
• 2002

The single phase induction motor(SPIM) with two windings, main and auxiliary winding, is widely used due to ruggedness, low maintenance and simplicity of construction. There are several ways of starting single phase induction motor. The most common method is to use centrifugal switch that is connected in series with a capacitor. But the centrifugal switch that is the external starting system has many problems. In this paper, we use triac to overcome defects that happen by centrifugal switch, Also we used inductor that connected with main winding to get a gate trigger voltage signal. Experiments are focused on a capacitor starling single phase induction motor.

• 전력전자학회논문지
• /
• 제20권4호
• /
• pp.375-387
• /
• 2015

This study investigates an economic and highly efficient power-converter topology and its modulation scheme for 60 kW rapid EV charger system. The target system is a three-phase three-switch buck-type rectifier topology. A new carrier-based PWM scheme, which is characterized by simple implementation using logic gates, is introduced in this paper. This PWM scheme replaces the diode rectifier equivalent switching state with an active switching state to produce the same effective current flowing path. As a result, the distortion of input current during the polarity reversal of capacitor line voltage can be mitigated. The proposed modulation technique is confirmed through simulation verification. The proposed modulation technique and its implementation scheme can expand the operation range of the three-phase three-switch buck-type rectifier with high-quality AC input and capacitor ripple current.

• 전력전자학회논문지
• /
• 제17권3호
• /
• pp.266-273
• /
• 2012

In this paper, the new open fault detection and tolerant operation method for 3 phase PWM rectifier is proposed. When open fault occurred on the inverter switches of 3 Phase PWM rectifier, the DC link voltage ripple is increased because the input current of the faulty phase is distorted. In this case, the quality of electric power would decrease, and the life time of DC link capacitor is decreased. The open fault is detected by a simple MRAS(Model Reference Adaptive System) without additional hardware sensors, and the tolerant operation carried out by turning on the opposite switch of the faulty switch without any redundancy. By the proposed method, the faulty phase input current can be controlled, so that 3-phase input current is balanced relatively under the faulty condition and the voltage ripple of DC link output is reduced. The validity of the proposed technique is proved on the 6kW 3-phase PWM rectifier system by simulation and experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.327-332
• /
• 1999

In this paper, six harmonic injection PWM method for reducing total harmonic distortion in single switch three phase discontinuous conduction mode boost converter is presented. In the proposed method, periodic six harmonic voltage is injected in the control circuit to vary the duty ratio of the converter switch within a line cycle so that the fifth order harmonic of the input current is reduced. Experimental results are verified by converter operating at 400V/6kW with three phase 140V~220V input.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.1003-1008
• /
• 2022

This paper proposes a method related to fault tolerance operation and characteristic analysis of asymmetric 6-phase permanent magnet synchronous motor. In general, motor drive systems with multi-phase structures can be continuously operated despite a reduction of power and speed by using a phase changeover or control techniques according to the failures. As a result, it is widely used in industrial fields such as aviation and defense, which require high efficiency and high reliability. In this paper, the second order ripple of the electrical fundamental freuqnecy occurs in the dq-axis currents of the synchronous coordinate system through mathematical analysis according to the switch open of the dual 3-phase inverter. Therefore, the fault tolerant operation method is presented by applying the fault detection method with a constant cycle for continuous operations. The effectiveness of the proposed fault tolerance operation method is verified through the several experiments.