• The Journal of the Acoustical Society of Korea
• /
• v.33 no.1
• /
• pp.10-20
• /
• 2014

To study the water-entry impact noise, on-board experiment using a small launcher firing various objects was performed in the Yellow Sea. As the launcher fires a cylindrical object from the ship vertically, generated noise is measured with a hydrophone on the starboard of Chung-hae, Marine surveyor. Three types of cylindrical objects, which have noses of flat-faced, conical, and hemisphere, were used during the experiment. The measured noise exhibits a time-dependency which can be divided into three phases: (1) initial impact phase, (2) open cavity flow phase, (3) cavity collapse and bubble oscillation phase. In most cases, the waveform of bubble oscillation phase is dominant rather than that of initial impact phase. Pinch-off time, where a cavity begins to collapse, occurs at 0.18 ~ 0.2 second and the average lasting time of bubble was 0.9 ~ 1.3 second. The energy of water-entry impact noise is focused in the frequency region lower than 100 Hz, and the generated noise is influenced by the nose shapes, object mass, and launching velocity. As a result, energy spectral density on the bubble frequency is higher in the order of flat-faced, conical, hemisphere nose, and the increase of initial energy raises the energy spectral density on the bubble frequency in the cylinder body of same shape. Finally, we compare the measurements with the simulated signals and spectrum based on the bubble explosion physics, and obtain satisfactory agreements between them.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.6
• /
• pp.527-536
• /
• 2013

In order to predict structural vibration and radiated noise of high-voltage transformer in operation, it is necessary to precisely find the excitation force generated by the coils and core. However, finding the excitation force through experiments of high voltage transformer in operation is not possible. Therefore, this paper deals with identifying the excitation force by using the acceleration data measured through experiments and the transfer function estimated through finite element model. A method to predict structural vibration and radiated noise was also proposed. Three-phase windings and the core are the source of high-voltage transformer. The excitation forces were identified using the acceleration data and the transfer function of the surface of the tank. Structural vibration and radiated noise from the surface of the tank was predicted by using the identified excitation force. As a result of the interpretation of the experimental and computational analysis of structural vibration from the surface of the tank and radiated noise from the field point, the interpretation of the computational analysis showed relatively good accordance with the experiment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.4
• /
• pp.10-17
• /
• 2007

FTIR(Fourier Transform Infrared) spectrometry is a useful method to obtain infrared spectra of materials in gas phase by registering the interferogram of a target material using an interferometer, and then performing a Fourier transform on the interferogram to obtain the spectrum. In this paper, sampling noise effect on signal processing of the rapid scan interferometer was studied with relation to sampling the interferogram points at the improper location and empirically verified.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.140-145
• /
• 2017

A channel is very sever in an underwater acoustic communication. Therefore, a modulation method with high spectrum efficiency is needed in an underwater acoustic communication. PSK(phase shift keying) for transmitting 1 bit or 2 bits is robust to noise, but sensitive to noise about more than 3 bits. CPFSK error performance for transmitting 1 bit or 2 bits is similar to that of PSK and CPFSK decreases high frequency components in modulation signal. In the paper, I analyze the performance of trellis coded 4-CPFSK modulation.

• Journal of Information Processing Systems
• /
• v.15 no.3
• /
• pp.604-615
• /
• 2019

Single-user spectrum sensing is susceptible to multipath effects, shadow effects, hidden terminals and other unfavorable factors, leading to misjudgment of perceived results. In order to increase the detection accuracy and reduce spectrum sensing cost, we propose an adaptive cooperative sensing strategy based on an estimated signal-to-noise ratio (SNR). Which can adaptive select different sensing strategy during the local sensing phase. When the estimated SNR is higher than the selection threshold, adaptive double threshold energy detector (ED) is implemented, otherwise cyclostationary feature detector is performed. Due to the fact that only a better sensing strategy is implemented in a period, the detection accuracy is improved under the condition of low SNR with low complexity. The local sensing node transmits the perceived results through the control channel to the fusion center (FC), and uses voting rule to make the hard decision. Thus the transmission bandwidth is effectively saved. Simulation results show that the proposed scheme can effectively improve the system detection probability, shorten the average sensing time, and has better robustness without largely increasing the costs of sensing system.

• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.543-547
• /
• 2002

We have constructed two extended-cavity diode lasers which are phase-locked with a 9.2 GHz frequency offset. We adopted a digital servo circuit for the phase-locking. The relative linewidth of the phase-locked lasers was less than 2 Hz. Using the measured beat spectrum, we found the carrier concentration to be about 93 %. We measured phase noise and relative frequency stability of the lasers. The Allan deviation at the gate time of 20 s was $2.7{\times}10^{-19}$.

• Journal of KSNVE
• /
• v.8 no.5
• /
• pp.957-963
• /
• 1998

A new signal processing technique, the directional harmonic wavelet map(dHWM), is presented to characterize the instantaneous planar motion of a measurement point in a structure from its transient complex-valued vibration signal. It is proven that the directional auto-HWM essentially tracks the shape and directively of the instantaneous planar motion, whereas the phase of the directional cross-HWM indicates its inclination angle. Finally, the technique is suessfully applied to an automobile engine for characterization of its transient motion during crank-on/idling/engine-off.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.282-282
• /
• 2000

The analysis of the radiation effect on matter has been performed using stochastic methods. Recently, It was discovered that the detector pulses of radiation can be analysed using deterministic method that utilizes the chaotic behaviour with an attractor found in a noise region. We acquired a time series for pulse tram of Am-241 using scintillation detector and reconstructed a phase space, then performed new analysis for the radiation detection signal by applying embedding theory, Lyapunov exponent, correlation dimension, autocorrelation dimension, and power spectrum.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.4 s.310
• /
• pp.45-52
• /
• 2006

In his paper, we have developed the SMD(surface mounted device) type PECL(positive emitter-coupled logic) VCXO of the $5{\times}7mm$ size for gratifying the requested specifications and the multilayer ceramic SMD(surface mounted device) package technology. The VCXO wired with the PECL(positive emitter coupled logic) package take place a stray inductance and a parasitic capacitance by the length and the inner pattern of the VCXO and the amplitude attenuation and signal loss due to the reflection of power source and the noise component. We have developed the Zig system to analyze the precise spectrum and evaluate the performance. The basic operating voltage is the 3.3 V and have the frequency range of 120MHz-180MHz. The Q factor is over 5K and it has the low jitter characteristics of 3.5 ps and low phase noise.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.165-171
• /
• 1996

A noncoherent full-digital PN(pseudo noise) code acquisition/tracking loop has been presetned and implemented in FPGA for the CDMA band-limited direct-sequence spread-spectrum (DS-SS) signals. It employs a simple decimator to control of local PN code phase to lower the hardware cost, and a second order loop to enable the more accurate tracking. The proposed acquisition/tracking loop has been designed in RTL-level VHDL, synthesized into logic gates using the design analyzer of synopsys software, implemented in an ALTERA FPGA chip, and tested. The number of logic gates used in the implemented FPGA chip is around 7000. The functionality has been verified using a PC interface circuitry and a logic analyzer.