• Journal of Korean Dental Science
• /
• v.16 no.2
• /
• pp.172-181
• /
• 2023

Purpose: To investigate the effect of epidermal growth factor (EGF) with collagen matrix (CM) for increasing gingival thickness. Materials and Methods: In five mongrel dogs, bilateral gingival defects were surgically made on the maxillary canines. After two months, either a subepithelial connective tissue graft (group SCTG) or CM with EGF (0.1 ug/ml, group EGF) was grafted, and the flap was coronally positioned to cover the graft materials. The animals were sacrificed after three months. Intraoral scanning was performed for soft tissue analysis. Histologic and histomorphometric analyses were performed. Result: Two animals exhibited wound dehiscence during the healing phase, leaving three for analysis. No statistically significant difference was found in soft tissue changes (P>0.05). The level of gingival margin (GM) increased in both groups (1.02±0.74 mm in group SCTG vs. 1.24±0.83 mm in group EGF). Linear increases at the GM pre-augmentation in the soft tissue profile were 1.08±0.58 mm in group SCTG and 0.96±0.73 mm in group EGF. Histomorphometric parameters (keratinized tissue height, tissue thickness, and rete peg density) were not significantly different between the groups (P>0.05). Conclusion: EGF loaded onto CM led to comparable gingival phenotype enhancement to SCTG.

• Journal of Aerospace System Engineering
• /
• v.18 no.4
• /
• pp.10-17
• /
• 2024

Solar-powered unmanned aerial vehicles(SPUAV), which are being actively developed domestically and internationally, generally feature high aspect ratio(AR) wings. These high AR wings necessitate a lightweight design as their weight increases, rendering them susceptible to flutter. Consequently, flutter analysis is critical from the initial design phase. Typically, flutter analysis is conducted using a standard section wing or more precisely through a 3D model. However, due to the extended analysis time required by 3D models, this study opts for a 2D aircraft model. The 2D model computes faster than the 3D model and intuitively secures the flutter boundary. In this study, a structural/aerodynamic force model of the 2D aircraft was established, and the findings were compared with those from a 3D half model. The results showed that the flutter analysis between the 2D model and the 3D half model was similar, within about a 3% margin, thus validating the proposed 2D model's effectiveness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8187-8194
• /
• 2015

To accelerate a heavy roller coaster train with over 1G force, a lot of thrust is required and linear synchronous motor(LSM) as propulsion method is suitable for this kind of system. To increase the propulsion efficiency of LSM, precise and real-time position information of vehicle is required for accurate phase control. However, the discontinuous position information with relatively long time interval is usually transmitted from the hall-sensors on the track every magnet length. In this paper, the basic motor model based on traditional dq-axis equations is described and the motor dynamic model is produced by considering the cogging force and friction loss. To improve the position accuracy, the position estimator is also proposed for LSM control system. Simulations were performed to check the characteristics of the torque control system which includes the position estimator based on the motor model. Simulation results based on the linearized model show that this control system has an enough bandwidth and phase margin and the executed algorithm achieves an ideal effect to follow the real-time position signal. Therefore, the feasibility of position estimator is also confirmed.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.3
• /
• pp.147-159
• /
• 2002

Weathered bentonites occcur as surficial alterations of some domestic bentonite deposits in the Tertiary formations, with the thickness of less than about 50 cm, along naturally-formed weathering surface with slopping in gentle. 7 $\AA$-halloysite was found together with montmorillonite in the weathered bentonite. Compared to normal bentonite, the weathered one is generally more clay-rich and contains little amounts of original rock-forming minerals and residues. In the electron microscopy, fine-scale occurrence of the clay minerals tends to be somewhat discrete and segregated rather than closely associated. h curled margin of montmorillonite lamella is deformed to become obtuse in the weathered bentonite. Halloysite occurs as acicular to tubular crystals with the length of less than 2 $\mu$m and the width of about 0.3 $\mu$m, which commonly forms bundle-shaped aggregates. Electron microscopic observations on the fine-scale occurrence and texture of the wtathered bentonites indicate that the clay mineral transition from montmorillonite to halloysite has undergone without accompanying any intermediate phases of both clay minerals such as a mixed-layered type (M/H). The alteration reaction between these two clay minerals probably took place in the form of dissolution and precipitation mechanism in oxidation condition. An intense chemical leaching of SiO$_2$, Na, K and Ca might occur during the alteration reaction, forming a lot of dissolution cavity and residual concentration of A1$_2$O$_3$ and Fe, relatively. As the result of the chemical change, a fsvorable condition for halloysite formation seemed to be provided.

• Environmental Engineering Research
• /
• v.25 no.1
• /
• pp.88-95
• /
• 2020

An investigation of rare metals recovery from LiNi_xCo_yMn_zO₂ cathode material of the end-of-life lithium-ion batteries is presented. To determine the influence of reductant on the leach process, the cathode material (containing Li 7.6%, Co 20.4%, Mn 19.4%, and Ni 19.3%) was leached in H₂SO₄ solutions either with or without H₂O₂. The optimal process parameters with respect to acid concentration, addition dosage of H₂O₂, temperature, and the leaching time were found to be 2.0 M H₂SO₄, 4 vol.% H₂O₂, 70℃, and 150 min, respectively. The yield of metal values in the leach liquor was > 99%. The leach liquor was subsequently treated by precipitation techniques to recover nickel as Ni(C₄H₇N₂O₂)₂ and lithium as Li₂CO₃ with stoichiometric ratios of 2:1 and 1.2:1 of dimethylglyoxime:Ni and Na₂CO₃:Li, respectively. Cobalt was recovered by solvent extraction following a 3-stage process using Na-Cyanex 272 at pH_eq ~5.0 with an organic-to-aqueous phase ratio (O/A) of 2/3. The loaded organic phase was stripped with 2.0 M H₂SO₄ at an O/A ratio of 8/1 to yield a solution of 114 g/L CoSO₄; finally recovered CoSO₄.xH₂O by crystallization. The process economics were analyzed and found to be viable with a margin of $476 per ton of the cathode material.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12A
• /
• pp.2000-2011
• /
• 2001

In this Paper, we convert conventional low speed(1x, 6x) DVD systems designed by analog PLL(Phase Locked Loop) into digital PLL to operate at high speed systems flexibly, and present optimal DPLL model in high speed(20x) DVD systems. Especially, we focused on the design of DPLL that can overcome channel effects such as bulk delay, sampling clock frequency offset and asymmetry phenomenon in high speed DVD systems. First, the modified Early-Late timing error detector as digital timing recovery scheme is proposed. And the four-sampled compensation algorithm using zero crossing point as asymmetry compensator is designed to achieve high speed operation and strong reliability. We show that the proposed timing recovery algorithm provides enhanced performances in jitter valiance and SNR margin by 4 times and 3dB respectively. Also, the new four-sampled zero crossing asymmetry compensation algorithm provides 34% improvement of jitter performance, 50% reduction of compensation time and 2.0dB gain of SNR compared with other algorithms. Finally, the proposed systems combined with asymmetry compensator and DPLL are shown to provide improved performance of about 0.4dB, 2dB over the existing schemes by BER evaluation.

• Proceedings of the PSK Conference
• /
• 2000.04a
• /
• pp.70-81
• /
• 2000

DA-5018 is a synthetic capsaicin derivative under development as a non-narcotic a analgesic ag$\varepsilon$nt. DA-50 18 showed a potent analgesic activity against acute and chronic pain m model(Tablel, 2.), but it had a narrow margin of safety. DA-5018 did not bind to opioid(${\kappa}, {\delta}, {\mu}$), NKl, CGRP receptors in vitro and its analgesic effect was not antagonized by naloxone, a and it did not develop analgesic tolerance. In addition DA-5018 had no inhibitory effects against c cyclooxygenase and 5-lipooxygenase activities. DA-5018 significantly increased the relcase of substance P from the slices of the rat spinal cord. These results suggest that DA-50 18 is not a narcotic nor aspirin-like analgesic and the release of substance P is one of analgesic mechanism of action of DA-5018. We found that DA-5018 was almost ten times more potent and was at l least IOO-times less irritable compared to capsaicin. Accordingly development of topical formula was adopted. Topical formula was desiged and screened by flux test of DA-5018 using hairless mouse skin and several formulas were selected. With these topical formulas we a assessed the analgesic efficacy and carried out the toxicity, skin irritation and pharmacokinetic studies. In streptozotocin-induced hyperalgesic rat and 50 % galactose-fed hyperalgesic rat as diabetic pain models, DA-5018 cream increased the pain thresh이ds up to 77.0% and 24.4% respectively, while Zostrix-HP(capsaicin cream) incr$\varepsilon$as cd by 65.9% and 21.0%. DA-5018 c cream showed a good analgesic effect as welI in FCA-induced arthritic rat. DA-5018 cream did not show any toxicological signs in acute and chronic toxicity test and had little skin irritation in car swclIing and scratching t$\varepsilon$st. Pharmacokinetics of DA-50 18 were studied after topical application of ${14}^C$-Iabelled or unlabelIed DA-5018 cream. Plasma and skin concentrations c except applied skin wcre below the dctection limit and after 7-day cummulative application, plasma concentrations were also below detection limit DA-50 18 may have an advantag$\varepsilon$ ov$\varepsilon$r c capsaicin and is now being developed as a topical agent for the treatment of pains. DA-50 18 cream was approved for Korean IND and is now under a Phase II clinical study for arthritic pain a after finising Phase I study. DA-50 18 was also liscensed out to Stiefel Company in America in

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1125-1134
• /
• 2011

In this paper a wideband frequency synthesizer is designed for DTV tuners using a $0.18{\mu}m$ CMOS process. It satisfies the DTV frequency band(48~1675MHz). A scheme is proposed to cover the full band using only one VCO and reliable broadband characteristics are achieved by reducing the variations of VCO gains and frequency steps. The simulation results show that the designed VCO has frequency range of 1.85~4.22GHz, phase noise at 4.22GHz of -89.7dBc/Hz@100kHz, gains of 62.4~95.8MHz/V(${\pm}21.0%$) and frequency steps of 22.9~47.9MHz(${\pm}35.3%$). The designed VCO has a phase noise of -89.75dBc/Hz at 100kHz offset. The designed synthesizer has a lock time less than $0.15{\mu}s$. The measured VCO tuning range is 2.05~3.4GHz. The frequency range is shifted down but still satisfy the target range owing to the design for enough margin. The designed circuit consumes 23~27mA from a 1.8V supply, and the chip size including PADs is $2.0mm{\times}1.5mm$.

• Journal of the Korean Society of Radiology
• /
• v.13 no.3
• /
• pp.325-332
• /
• 2019

This study analyzed the movement of tumors using 4DCT. Appropriate uniform IM were identified using TC, II and CI depending on ITV margins. DVH and NTCP were also compared in each case. Dose analysis on tumors with uniform IM showed that the optimal treatment plan for satisfying all TC, CI, II was evaluated as 2 mm in phase 20 and 3 mm in 40%. That was compared to the dose from the normal tissues of $PTV_{20}$, $PTV_{40}$. In the 20% radiation field, V5, V10, and V20 for the lungs increased 1.49, 1.26, and 0.65%, while 40% increased by 1.9, 2.41 and 1.23%. NTCP had a dose increase of 0.57 to 0.029% from 20% and 40%. There was a dose increase in the spinal cord and heart at uniform IM, but there was no significant difference. These data suggest that the ITV setting of 20%, phase for Respiratory Gated Radiotherapy using Novalis ExacTrac system can be applied with a uniform IM 2 mm and 40% with 3 mm for optimal treatment plan.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.744-753
• /
• 2018

The Stockholm Convention, which was adopted in Sweden in 2001 to protect human health and the environment, includes regulations for Persistent Organic Pollutant Rotors such as toxic and bioaccumulatives. Currently, there are 28 types of materials. This prohibits and limits the production, use, and manufacture of products. Korea is a member of the Convention, and it is necessary to prepare management and treatment plans to address the POP trends. Thus, we experimentally investigate whether the environmentally stable incineration is achieved when the sample is thermally treated using the Lab-scale (1 kg/hr). The target samples is pesticides in liquid phase and solid phase. In this study, organic chlorinated pesticides and their thermal characteristics were analyzed. We calculated the theoretical air volume based on the element analysis results. Because the interior of the reactor is small, more than 10 times of the air ratio was injected. The retention time was set to at least 4 seconds using a margin. The incineration temperature was $850^{\circ}C$ and $1100^{\circ}C$. Thus, we experimentally investigated whether the environmentally stable incineration was achieved when the sample was thermally treated using the Lab-scale (1 kg/hr). We analyzed five types of exhaust gas; the 02 concentration was high, but the CO amount decreased. Complete combustion is difficult because of the small size of the furnace due to the nature of Lab-scale. The organic chlorine-containing pesticide had an average decomposition rate of 99.9935%. Considering the decomposition rates of organic chlorine-containing pesticide in this study, the incineration treatment at over 2 ton/hour, which is typical for a conventional incinerator, is possible. Considering the occurrence of dioxins and unintentional persistent organic pollutants, it can operate at more than $1,100^{\circ}C$.