• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.1
• /
• pp.126-136
• /
• 1992

In this paper, a simple structured feedback compensation scheme for a electro-hydraulic servo system to keep the response characteristics unchanged regardless of the load variation is proposed. In electro-hydraulic servo system, servovalve is most important control element. But the relation between input corrent and output flowrate of the servovalve has properties as follows; firstly, in spite of constant input current, output flowrate decreases as load pressure increases, secondly, according to frequency response of typical servovalve, the characteristics of gain and phase shift is something like 2'nd order system. Load pressure feedback compensation method has been applied to eliminate the first influence, the second influence has been improved by phase lead compensation method. As a result of above compensation methods, regardless of variation load condition, spring and inertia load, the compensation scheme has been verified to be effective within the range of frequency less than 25Hz by static response and dynamic response in time domain and frequency domain through experiments.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.53-61
• /
• 2010

We propose a simple technique to stabilize the optical output intensity of a fiber ring resonator. The electronic feedback circuit system, which consists of two voltage control oscillators, a phase comparator, and a low pass filter, is applied to the fiber ring resonator in order to compensate the optical phase shift in the ring loop. The reference electrical signal determines the operating condition of the fiber ring resonator for the desired optical output signal. The experimental results within the operating range agree well with the analytical results. The simulated performance of the proposed model is also compared with that of other existing models and shows significant improvement over them.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.1
• /
• pp.1-11
• /
• 1997

In this paper, a novel multivariable state feedback control with feedforward control is proposed to improve control performance of power conversion systems. The targets of the application are three-phase voltage-source PWM converter and inverter system, and current-source PWM converter and inverter system, of which equivalent circuits and models are derived and analyzed. Various simulation results are presented to verify the validity of the proposed scheme.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1955-1957
• /
• 2003

This paper presents a novel defected ground structure (DGS) and its application to a microwave oscillator. The presented oscillator is designed so as to use the suggested defected ground structure as a feedback loop inducing a negative resistance as well as a frequency-selective circuit. Applying the feedback loop between the drain and the gate of a FET device produces precise phase conversion in the feedback loop. The equivalent circuit parameters of the DGS are extracted by using a three-dimensional EM calculations and simple circuit analysis method. The implemented 1.07 GHz oscillator exhibits 0 dBm output power with over 15% dc-to-RF power efficiency and -106 dBc/Hz phase noise at 100 kHz offset from carrier.

• 전자공학회논문지 IE
• /
• v.47 no.4
• /
• pp.39-47
• /
• 2010

This paper proposes a numerical analysis to prove that the performance of the differential phase detections (DPDs) with the decision feedback, such as the decision feedback DPD (DF-DPD) and the DPD with recursively generated phase reference (DPD-RGPR), approach the performance of the coherent detection with differential decoding. The conventional differential phase detection for M-ary DPSK can make the receiver architecture simple, while it can make the bit-error rate (BER) performance poor because of the previous noisy phase as a reference phase. To improve the BER performance of the conventional differential detection, multiple symbol differential detection methods, including DF-DPD and DPD-RGPR, have been proposed. However, the studies on the analysis and on the comparison of these methods have been little performed. Then, this paper mathematically intends to analyze and compare the performance of the DPDs with the decision feedback. The analysis results show that the DPDs with the decision feedback can have the performance equal to that of the coherent detection with differential decoding and be available for the noncoherent detection in the improved performance. Considering the hardware complexity, the DPD RGPR with the simple detection process by using the recursively generated phase reference can be more simply implemented than the DF-DPD based on the architecture whose complexity increases according to the increasing detection length.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.265-272
• /
• 2010

This study examined the relative effects of weekly and daily group feedback on the customer service behaviors in a gas station. Participants were four employees providing full services to the customers. Four target service behaviors, which were identified from the job description for the employees, served as the dependent variables. The data were collected by a supervisor. The independent variable was the frequency of group feedback on the four service behaviors: weekly and daily group feedback. An ABC within group design was adopted. After baseline (A), the weekly group feedback condition (B) was introduced. In the next phase, the daily group feedback condition (C) was introduced. Both weekly and daily group feedback were presented in a graph form and posted at a conspicuous location. Results showed that both weekly feedback and daily feedback conditions were effective in increasing the target behaviors. And, there was difference in the effects between the two conditions.

• Journal of Korean Physical Therapy Science
• /
• v.28 no.1
• /
• pp.33-45
• /
• 2021

Background: Children with cerebral palsy have difficulty acquiring motor skills through motor learning due to lack of motor planning of the central nervous system and musculoskeletal dysfunction. Motor learning is the acquisition or modification of movements with the aim of developing skilled movements and behaviors. Cerebral palsy improve motor function through motor learning, and effective motor learning mainly depends on practice parameters such as learning feedback. Therefore, we investigate the effect of motor learning in children with cerebral palsy and try to present the possibility of clinical application. Design: A systemic review. Methods: Research papers were published from Jan, 2010 to Dec, 2020 and were searched using PubMed and Medline. The search terms are 'task specific training' OR 'motor learning' OR 'feedback(Mesh term)' OR 'goal activity' AND 'cerebral palsy(Mesh term)'. A total of eight papers were analyzed in this study. The paper presented the quality level based on the research evidence, and also presented PEDro (Physiotherapy Evidence Database) scores to evaluate the quality of design studies in randomized clinical trials. Results: The results showed that motor learning coaching in children with cerebral palsy improved motor function in post and follow up tests. Also, self-control feedback of motor learning is more effective than external control feedback. 100% external control feedback of motor learning is effective in the acquisition phase and 50% external feedback of motor learning is effective in the retain phase. Conclusion: These results suggest that it will be an important data for establishing evidence on the effect of motor learning arbitration methods in children with cerebral palsy to develop clinical applicability and protocols.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.206-213
• /
• 2014

In this note, a new robust nonlinear output feedback variable structure controller is first systematically and generally designed for the output control of more affine uncertain nonlinear systems with mismatched uncertainties and matched disturbance. A transformed integral output feedback sliding surface with a most simple form is applied in order to remove the reaching phase problems. The closed loop exponential stability and the existence condition of the sliding mode on the integral output feedback sliding surface is investigated with a corresponding output feedback control input in Theorem 1. For practical application the continuous implementation of the control input is made by the modified saturation function. The effectiveness of the proposed controller is verified through a design example and simulation study.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.216-220
• /
• 1999

In this paper, the feedback linearization technique is used with the sliding mode control for nonlinear system. The combination of these two control techniques can be achieved by proposing a novel sliding surface which has the nonminal dynamics of the original system controlled by feedback linearization technique. The noble design of the sliding surface is based on the augmented system whose dynamics have a higher order than that of the original system. The reaching phase is removed by using an initial virtual state which makes the initial sliding function equal to zero

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.83-84
• /
• 2006

In this paper, we introduce the AF cooperative diversity with multiple relays using phase feedback. Simulation results show that the proposed schemes obtain the diversity gain according to the number of the cooperating terminals. The performance of proposed scheme using tolerable quantized feedback is close to that of proposed scheme using full feedback.