• Korean Journal of Environmental Biology
• /
• v.35 no.4
• /
• pp.694-705
• /
• 2017

The aim of this study was to isolate and identify marine bacterium with anti-methicillin-resistant Staphylococcus aureus (MRSA) activity, and to purify the anti-MRSA compound, as well as to determine its activity and synergistic effects. Among the marine bacteria isolated in this study, the YJ-1 isolate had the strongest anti-MRSA activity. The YJ-1 isolate was identified on the basis of its biochemical characteristics and an analysis of 16S rRNA gene sequences. The YJ-1 isolate showed over 99.2% homology with Pseudomonas stutzeri, and was designated as a Pseudomonas sp. YJ-1. The optimal culture conditions were $25^{\circ}C$ and initial pH 7.0. For the purification of the anti-MRSA compounds, the YJ-1 was cultured in Pa PES-II medium, and the culture filtrates were extracted by ethyl acetate, hexane, and 80% MeOH. The 80% MeOH fraction was separated by a $C_{18}$ ODS column, silica gel chromatography and a reverse phase HPLC, to yield three anti-MRSA agents, the MR1, MR2, and MR3 compounds. When the MR1 compound of $250{\mu}g\;mL^{-1}$ concentration was applied to the MRSA cells, over 95% of bacterial cells was killed within 48 hr. Compared with vancomycin and ampicillin, the MR1 compound showed significant anti-MRSA activity. In addition, the anti-MRSA activity was increased by dose and time dependent manners. Furthermore, the combination of an MR1 compound with vancomycin produced a more rapid decrease in the MRSA cells than did the MR1 compound alone. Taken together, our results suggest that the Pseudomonas sp. YJ-1 and its anti-MRSA compounds could be employed as a natural antibacterial agent in MRSA infections.

• Korean Journal of Remote Sensing
• /
• v.14 no.3
• /
• pp.213-222
• /
• 1998

Electro-Optical Camera(EOC) is the main payload of the KOrea Multi-Purpose SATellite(KOMPSAT) with the mission of cartography to build up a digital map of Korean territory including a Digital Terrain Elevation Map(DTEM). This instalment which comprises EOC Sensor Assembly and EOC Electronics Assembly produces the panchromatic images of 6.6 m GSD with a swath wider than 17 km by push-broom scanning and spacecraft body pointing in a visible range of wavelength, 510~730 nm. The high resolution panchromatic image is to be collected for 2 minutes during 98 minutes of orbit cycle covering about 800 km along ground track, over the mission lifetime of 3 years with the functions of programmable gain/offset and on-board image data storage. The image of 8 bit digitization, which is collected by a full reflective type F8.3 triplet without obscuration, is to be transmitted to Ground Station at a rate less than 25 Mbps. EOC was elaborated to have the performance which meets or surpasses its requirements of design phase. The spectral response, the modulation transfer function, and the uniformity of all the 2592 pixel of CCD of EOC are illustrated as they were measured for the convenience of end-user. The spectral response was measured with respect to each gain setup of EOC and this is expected to give the capability of generating more accurate panchromatic image to the users of EOC data. The modulation transfer function of EOC was measured as greater than 16 % at Nyquist frequency over the entire field of view, which exceeds its requirement of larger than 10 %. The uniformity that shows the relative response of each pixel of CCD was measured at every pixel of the Focal Plane Array of EOC and is illustrated for the data processing.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• Journal of Climate Change Research
• /
• v.2 no.1
• /
• pp.55-68
• /
• 2011

The Intergovernmental Panel on Climate Change(IPCC) has identified the causes of climate change and come up with measures to address it at the global level. Its key component of the work involves developing and assessing future climate change scenarios. The IPCC Expert Meeting in September 2007 identified a new greenhouse gas concentration scenario "Representative Concentration Pathway(RCP)" and established the framework and development schedules for Climate Modeling (CM), Integrated Assessment Modeling(IAM), Impact Adaptation Vulnerability(IAV) community for the fifth IPCC Assessment Reports while 130 researchers and users took part in. The CM community at the IPCC Expert Meeting in September 2008, agreed on a new set of coordinated climate model experiments, the phase five of the Coupled Model Intercomparison Project(CMIP5), which consists of more than 30 standardized experiment protocols for the shortterm and long-term time scales, in order to enhance understanding on climate change for the IPCC AR5 and to develop climate change scenarios and to address major issues raised at the IPCC AR4. Since early 2009, fourteen countries including the Korea have been carrying out CMIP5-related projects. Withe increasing interest on climate change, in 2009 the COdinated Regional Downscaling EXperiment(CORDEX) has been launched to generate regional and local level information on climate change. The National Institute of Meteorological Research(NIMR) under the Korea Meteorological Administration (KMA) has contributed to the IPCC AR4 by developing climate change scenarios based on IPCC SRES using ECHO-G and embarked on crafting national scenarios for climate change as well as RCP-based global ones by engaging in international projects such as CMIP5 and CORDEX. NIMR/KMA will make a contribution to drawing the IPCC AR5 and will develop national climate change scenarios reflecting geographical factors, local climate characteristics and user needs and provide them to national IAV and IAM communites to assess future regional climate impacts and take action.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.219-242
• /
• 2006

Quantitative analysis and provenance interpretation of the raw materials for the jade (amazonite) excavated from the Asan Sijeonri site were studied. Geology of the Sijeonri site composed mainly of Precambrian metasedimentary rocks and the alluvium ranges extensively. In the site, amazonite jade was excavated in the Bronze Age No. 4 circular-shaped resident site. The jade has a comma-shaped and shows light green color with so much cracks. The jade is silicate mineral of columnar habits that is shown white streak, and has fine cleavages with vitreous luster. As the analytical results, this jade was identified as a feldspar-group mineral gemologically called amazonite that is mineralogically microcline formed to intergrowth of albite and orthoclase. Internal textures of the amazonite present Na-end member of albite coexisting with K-end member of orthoclase that are replaced each other along the cleavages and twin planes with several ${\mu}m$ scales. Therefore, the amazonite is one mineral phase combined with albite and orthoclase by substitution of $Na_2O$ and $K_2O$, respectively. The Danyang are is an unique producing site of amazonite in South Korea, and Gongju Janggimyeon was known as microcline provenance to the utmost area from the Sijeonri site. In the marginal area of southern coast in Korean Peninsula, Bronze Age amazonite has been excavated in several sites, where original provenance of the raw amazonite is not identified. The Sijeonri site does not show any facilities of producing and processing traces for amazonite jade. Also, only one jade was collected in the Sijeonri site. Therefore, there is not possibility that the provenance of raw jade is the Sijeonri area. To explain original provenance of the amazonite jade, migration path, manufacturing process and archaeological interpretation are required.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.3
• /
• pp.49-61
• /
• 2019

Swine manure has been recognized as a organic sources for composting and many research was conducted to efficiently utilize and treat. This study was to evaluate a feasibility for producing swine manure compost under various treatment with mixture of swine manure and saw dust. Treatments were designed as follows; non aerated composting pile(REF), aerated composting pile of $100L/m^3$(EXP1), and aerated composting pile of $150L/m^3$(EXP2). The total days of fermentation were 28 days and each samples were collected at every 7 days from starting of composting. Temperature sensors were installed under 30~40cm from the surface of composting pile. Inner temperature in composting piles of EXP1 and EXP2 was rapidly increased to $67{\sim}75^{\circ}C$ within 1~2 days. The elevated temperatures found during the thermophilic phase are essential for rapid degradation of organic materials. While swine manure composted, moisture content, total nitrogen, EC of EXP1, EXP2 in sample at 28 days were lower than those of REF. But, pH and organic matter of EXP1, EXP2 in sample at 28 days were higher than those of REF. After finishing fermentation experiment, maturity was evaluated with germination test. Calculated germination index(GI) at REF, EXP1 and EXP2 were 23.49, 68.50 and 51.81, respectively. The values of germination index were higher at EXP1 and EXP2 which is aerated composting piles than REF which is non aerated composting pile. According to the results, composting process by aerated static pile compost had significant effect on the reduction of required period for composting. Supplying adequate amount of air to compost swine manure will greatly reduce composting period.

• The Korean Journal of Archival Studies
• /
• no.33
• /
• pp.113-153
• /
• 2012

Since the government of Republic of Korea was established in 1948, a period that made the biggest difference on National Records Management System was from 1999 when was enacted. Especially, it was the period of President Roh's five-year tenure called Participation Government (2003-2008). This paper illustrates distinct phenomena of Records Management System Policy during Participation Government. Three major agents of the system are President Roh, the Presidential Secretariat, and Archives Management Bureau at the National Archives of Korea. They sometimes competed with themselves for initiatives of policy, but they used to cooperate with each other and have brought about innovations on records management. The first distinctive characteristic of Participation Government (below PG)'s records management is that it implemented governance actively. That is, it tried to listen carefully to all opinions of interest organizations related to records management and enacted laws based on those. The PG not only listened to civic groups, but also created two professional groups called Records Management Innovation Expert Committee and Innovation Decentralization Assessment Committee. Those two groups enacted . Another remarkable feature is a nomination of records management specialists at public institutions. In 2005, PG created Archival Research Positions among research public officials and appointed experts in the field of Archival Research History at central department. With the process, the government tried to provide public records management system and to improve specialty of records management. Since then, records management specialists were employed not only at local governments but also at private archival institutions. It has allowed of entering a new phase in employing records management professionals. The Participation Government also legislated (completely revised) . It led to a beginning of developing records management in Republic of Korea. was revised thoroughly for the e-Government period and was established as a foundation for managing presidential records. An establishing process of a country's records management system describes the degree of democratic development of society. Following governments should supplement PG's shortcomings and carry out 'New Governance Records Management System'. Principal subjects of records management system should include not only a government but also civic groups, local governments, small businesses, and academic professionals. The object of records management also needs to be democratic by recording not only the plans and enforcements of a task but also influences and results of a task. The way of archiving ought to be discussed by all related principals.

• Journal of Wetlands Research
• /
• v.24 no.4
• /
• pp.345-353
• /
• 2022

A wastewater treatment plant (WWTP) is a major gateway for the engineered nano-particles (ENPs) entering the water bodies. However existing studies have reported that many WWTPs exceed the No Observed Effective Concentration (NOEC) for ENPs in the effluent and thus they need to be designed or operated to more effectively control ENPs. Understanding and predicting ENPs behaviors in the unit and \the whole process of a WWTP should be the key first step to develop strategies for controlling ENPs using a WWTP. This study aims to provide a modeling tool for predicting behaviors and removal efficiencies of ENPs in a WWTP associated with process characteristics and major operating conditions. In the developed model, four unit processes for water treatment (primary clarifier, bioreactor, secondary clarifier, and tertiary treatment unit) were considered. Additionally the model simulates the sludge treatment system as a single process that integrates multiple unit processes including thickeners, digesters, and dewatering units. The simulated ENP was nano-sized TiO₂, (nano-TiO₂) assuming that its behavior in a WWTP is dominated by the attachment with suspendid solids (SS), while dissolution and transformation are insignificant. The attachment mechanism of nano-TiO₂ to SS was incorporated into the model equations using the apparent solid-liquid partition coefficient (Kd) under the equilibrium assumption between solid and liquid phase, and a steady state condition of nano-TiO₂ was assumed. Furthermore, an MS Excel-based user interface was developed to provide user-friendly environment for the nano-TiO₂ removal efficiency calculations. Using the developed model, a preliminary simulation was conducted to examine how the solid retention time (SRT), a major operating variable affects the removal efficiency of nano-TiO₂ particles in a WWTP.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.413-420
• /
• 2020

We analyzed the growth characteristics of each cell line and acclimating substrate of Larix kaempferi plantlets regenerated from somatic embryos, with the goal of increasing the survival rate during the acclimation phase. Somatic embryos from three embryogenic cell lines (L14-66, L16-18, and L17-B4) were used, and the acclimating substrates were commercial soils for Larix species (Larix-Soil) and horticultural corps (Hort-Soil), Elle-pot, and Peat-plug. The average initial shoot and root length was shortest in L14-66 and longest in L17-B4. The average survival rate by cell line was highest (87.0%) in L17-B4 and lowest (64.3%) for L14-66. Survival rates by substrate were highest in Elle-pot (88.5%) and Peat-plug (88.9%). The initial shoot length of the L14-66 plantlets was highly correlated with survival rates in the Larix-Soil (r = 0.852), Hort-Soil (r = 0.692), and Elle-pot (r = 0.867) substrates, but not in Peat-plug with high total nitrogen content. The initial shoot length of the L17-B4 plantlets was not correlated with the survival rate in any of the substrates. The initial root length of the L14-66 plantlets was highly related to survival rates in the Larix-Soil (r = 0.986), Elle-pot (r = 0.846), and Peat-plug (r = 0.802) substrates, and the survival rate of the plantlets was higher as the initial root length was longer. The initial root length of the L17-B4 plantlets was related to survival rate only in the Larix-Soil (r = 0.896) and Elle-pot (r = 0.696) substrates. In conclusion, to increase the survival rate of plantlets, root length should be considered over shoot length, and it is recommended to use substrates with high nitrogen content, such as Peat-plug, or to add fertilizer, during the acclimating process. In addition, in order to increase the survival rate, lines with high initial growth should be developed.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.98
• /
• pp.78-103
• /
• 2020

Transcribed Buddhist sutras generally consist of a frontispiece illustration, sutra illustrations, and sutra text, although some parts may be lost over time. Most transcribed sutras originally include an official record of the transcription (saseonggi) at either the beginning or end of the volume, which document various details of the production, including who commissioned the sutra and when it was transcribed. If such records are unavailable or difficult to decipher, the date of the sutra can only be estimated by comparison to other works with known production dates. This is the case with Korean Treasure #978, the "Transcription of the Avatamsaka Sutra (Zhou Version) in Gold on White Paper" (hereinafter, "Avatamsaka Sutra, Volume 29"), which does not contain any details of its production. Based on formal comparisons, the volume has been estimated to date from the early Joseon period. Important criteria for estimating the production date include the type of calligraphy script and the overall expression of the sutra illustrations. However, these features are missing from some early Joseon sutras, making it difficult to definitively assert which characteristics are representative of the period. Also, transcribed sutras from the late Goryeo period (after 1350) and early Joseon period are often very similar in terms of the expression of the frontispiece illustrations and sutra illustrations. From the late Goryeo period through the early Joseon period, the illustrations of transcribed sutras, which had previously been relatively detailed and realistic, gradually became more formalized and stylized. Significantly, Avatamsaka Sutra, Volume 29 includes illustrations showing both styles of expression (i.e., realistic and formalized). Moreover, the hemp leaf design on the frontispiece and the border around the sutra illustrations are unique features that have never been seen on any other transcribed sutras. Notably, however, Avatamsaka Sutra in Gold on White Paper, Volume 26 (hereinafter, "Avatamsaka Sutra, Volume 26"), which has not yet been introduced in academic research, is complete with frontispiece, sutra illustrations, and sutra text. This sutra is identical to Avatamsaka Sutra, Volume 29 in size, composition, and details, and is thus estimated to have been produced at the same time and by the same patrons. According to the record at the end of the volume, Avatamsaka Sutra, Volume 26 was commissioned in 1348 by Gi Cheol (d. 1365), which corresponds to the estimated date of Avatamsaka Sutra, Volume 29 derived by formal comparison. Based on this new information, Avatamsaka Sutra, Volume 29 was likely produced in the late Goryeo period rather than the early Joseon period, as has previously been presumed. The new study of Avatamsaka Sutra, Volume 26 also seems to confirm that both sutras were transcribed by highly skilled artisans in 1348 of the late Goryeo period, a transitional phase in the expression of sutra illustrations.