• Proceedings of the Korea Contents Association Conference
• /
• 2017.05a
• /
• pp.107-108
• /
• 2017

3차원 위상대조도 기법의 단점인 긴 검사시간으로 인해 임상적 유용성이 떨어진다. 본 논문은 시간매개변수인 병렬영상기법(Grappa) 변경에 따른 혈류정보의 정량적 평가를 통해 차이점을 알아보고 임상적 활용정도를 평가하였다. 자체 제작한 혈류팬텀을 통해 실험하였으며, Grappa을 5번 변경하여 실험하였다. 연구결과, Grappa를 적용하지 않았을 경우 혈류속도는 평균 9.42로 총 4단계를 적용한 혈류속도 차이율은 각각(1.4, 1.5, 0.4, 1.5%)이었으며 flow와 WSS도 각각(1.4, 1.6, 0.8, 25%), (2.1, 1.4, 1.1, 0.8%)이었다. 통계적으로도 유의하지 않아 Grappa를 적용하지 않은 검사법과 혈류정보가 동일하였다.(P>0.05) 긴 검사 시간으로 인해 임상적 활용이 떨어지는 짧은 검사시간을 요하는 소아환자나 중등도 환자 또는 폐쇄공포증 환자에게 시간을 단축한 3차원 위상대조도 기법을 사용하여 단점을 보완한다면 임상적 활용가치가 높아질 것이라 사료된다.

• Korean Journal of Microbiology
• /
• v.28 no.4
• /
• pp.290-296
• /
• 1990

Putrescine, spermidine, and spermine were found to persent in Methylobacterium extorquens AM1 growing on methanol, succinate, glucose, or nutrient broth as an energy source. Spermidine was found to be a major polyamine in cells growing on methanol or succinate, while putrescine to be the one in nutrient broth-grown cells. The overall content of polyamines in cells growing on glucose was less than that in cells growing on other substrates. Spermine was the most abundant polyamine in glucose-grown cells. Accumulation of polyamines in M. extorquens AM1 was maximal at the mid-exponential or early stationary phase during growth on each substrate. The effect of polyamines added into the medium on the polyamine composition in M. extorquens AM1 was variable. Each polyamine added into the nutrient broth medium was found to increase the amount of the respective polyamine in the cell. Exogeneously added polyamines had no effect on the growth of M. extorquens AM1.

• Broadcasting and Media Magazine
• /
• v.11 no.1
• /
• pp.78-85
• /
• 2006

Cognitive radio is a paradigm for wireless communication in which either network of wireless node itself changes particular transmission or reception parameters to execute its tasks efficiently without interfering with the licensed users. This paper represents a performance of the cognitive radio technology on dual polarized MIMO system using six-port receiver. Six-port technology is well known direct conversion receiver. In this paper, a six-port phase discriminator based polarization signal separation is shown. That is, the SER(Symbol Error Rate) performance is improved using polarization separator and simple receiver architecture is proposed applying six-port receiver. The six-port technology has priority to adapt changeable frequency system and variable environments for cognitive radio. In general, dual polarized MIMO system has good capacity and quality using polarization separator [1].

• Journal of Pharmaceutical Investigation
• /
• v.4 no.1_2
• /
• pp.46-54
• /
• 1974

A new spectrophotemetric method was estalished for the determination of oleic acid. This method is based on the 1,2-dichloroe-thane extraction of the ion-pair formed between methylene blue and oleic acid. But the absorbance of an ion-pair in the 1,2-dichloroe-thane layer was variable with the temperature, the ion-pair was extracted back into a diluted hydrochloric acid solution. The maximum absorbance of the acid extract observed at $660m{\mu}$ and a lineal relationship was observed from the initial amount over the range of $50-800{\gamma}/ml$ of oleic acid in the aqueous phase. The composition ratio of the ion-pair formed between methylene blue and oleic acid was determined to be 2 : 1 by both the mole ratio and continuous variation methods.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.80-89
• /
• 2002

The flame structure and soot formation in Acetylene-Air nonpremixed jet flame are numerically analyzed. We employed two variable approach to investigate the soot formation and oxidation processes. The present soot reaction mechanism involves nucleation, surface growth, particle coagulation, and oxidation steps. The gas phase chemistry and the soot nucleation, surface growth reactions are coupled by assuming that the nucleation and soot mass growth has the certain relationship with the concentration of pyrene and acetylene. We also employed laminar flamelet model to calculate the thermo-chemical properties and the proper soot source terms from the information of detailed chemical kinetic model. The numerical and physical model used in this study successfully predict the essential features of the combustion processes and soot formation characteristics in the reaction flow field.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.635-636
• /
• 2006

A pulse with modulation(PWM) that keeps a constant angle of dwell and adjust duty ratio is a good method to control a speed of SRM. And a method of one pulse control is proper a operation on range of high speed in SRM for a good energy efficiency. Because PWM method is more safety than one pulse method, conversion of those is best choice according the speed range. So, some algorithm is need for smooth conversion of the mode of control. This paper presents a factor of conversion that proper the conversion of control mode between PWM and one pulse method This factor is from estimation of torque and proper at the variable range of conversion and show the better conversion characteristic than constant factor of conversion.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.219-222
• /
• 1994

This thesis describes an observer of Switched Reluctance Motor for position. velocity and torque estimation using current sening. Inductance of SRM varies trapezoidally with respect to the rotor position. This means that the inductance of each phase is a periodic function with the same period. Under this condition. the observer with a constant gain can be developed though SRM has nonlinear characteristics. Because SRM has equivalent physical meaning with each period. The stability of error system which is the difference between actual system and observer system. is analyzed using Lyapunov and variable structure theory. The effectiveness of the proposed estimation is shown by various simulation.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.27-30
• /
• 2004

In this paper, A fixed turn-on, variable turn-off control method considering the reference speed and load is shown with verification by using MATLAB Simulink. The proposed method uses simple operation and is suitable to the system of low-cost application and also advantageous for reducing the torque ripple.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.6 s.27
• /
• pp.55-61
• /
• 2004

A numerical procedure for optimizing the shape of three-dimensional sedimentation tank is presented to maximize its sedimentation efficiency. The response surface based optimization is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis for multi-phase flow. Standard $k-{\epsilon}$ model is used as a turbulence closure. Three design variables such as, tank height to center feed wall diameter ratio, blockage ratio of center feed wall and angle of distributor are chosen as design variables. Sedimentation efficiency is defined as an objective function. Full-factorial method is used to determine the training points as a means of design of experiment. Sensitivity of each design variable on the objective function has been evaluated. And, optimal values of the design variables have been obtained.

• Transactions of Materials Processing
• /
• v.12 no.4
• /
• pp.290-295
• /
• 2003

High temperature deformation behavior and prediction of final microstructure after forming of Ti-6Al-4V alloy were investigated in this study. Equiaxed and Widmanstatten microstructures of Ti-6Al-4V alloys were prepared as initial microstructures and compression tests were performed to obtain the flow curves at high temperatures (700∼110$0^{\circ}C$) and various strain rates (10$^{-4}$ ∼10$^2$/s). From the results of compression test, strain rate sensitivity (m) and activation energy (Q) were calculated and used to establish constitutive equation. To predict the final microstructure after farming, finite element analysis was performed considering the microstructural parameters such as grain size and volume fraction of second phase.